Abstract
This study examines the anisotropic dissolution of basal plane gibbsite (γ-Al(OH)₃) nanoplates in sodium hydroxide solution using in situ atomic force microscopy (AFM) and density functional theory (DFT) calculations. In the surface-reaction controlled regime, in situ AFM measurements reveal anisotropic dissolution of hillocks and etch pits on the gibbsite basal plane, with preferred dissolution directions alternating between layers. The mirror-symmetric pattern of dissolution preference between adjacent gibbsite aluminum hydroxide sheets, observed along the crystallographic a-c plane, results from the matching symmetry between the structures of the adjacent (001) and (002) crystal planes. Consequently, the overall dissolution rate of gibbsite nanoplates exhibits crystallographic a-c plane symmetry, as the rate of parallel steps is governed by the slower ones. DFT calculations suggest that the anisotropic dissolution is partially due to the orientation and strength of Al-OH-Al linkage pairs within the gibbsite surface structure.
Introduction
Gibbsite (γ-Al(OH)₃) is a cornerstone mineral in both geology and industry, serving as the primary component of bauxite ore and a significant factor in the treatment of high-level radioactive waste. Despite its importance, the fundamental mechanisms governing its dissolution have remained elusive. Traditional "bulk" experiments provide average dissolution rates that mask the complex, direction-dependent behaviors occurring at the mineral surface. This study addresses this gap by combining real-time atomic-scale imaging with quantum mechanical simulations to map how gibbsite dissolves in alkaline conditions.
Methodology
The research team utilized a "look and calculate" approach. High-speed in situ Atomic Force Microscopy (AFM) was employed to record the dissolution of gibbsite nanoplates in sodium hydroxide (NaOH), allowing for the direct measurement of "step velocity"—the speed at which individual atomic layers retreat. To interpret these observations, Density Functional Theory (DFT) calculations were performed to determine the energy required to break specific Al-OH-Al linkages within the crystal structure.
Correlative microscopy, including Transmission Electron Microscopy (TEM) and Selected Area Electron Diffraction (SAED), was used to precisely orient the crystals. This ensured that the dissolution processes observed under AFM could be accurately mapped to specific crystallographic directions (Figure 1).
Key Insights and Results
The most striking discovery is that gibbsite dissolution is highly "anisotropic" (direction-dependent), with the preferred direction of mineral retreat flipping like a mirror image with every single atomic layer. This "layer-by-layer flip" is a direct consequence of the crystal's internal symmetry, where adjacent aluminum hydroxide sheets are mirror images of each other along the crystallographic a-c plane.
As illustrated in Figure 2, dissolution rates are highly sensitive to direction. In 0.1M NaOH, the fastest step moved at approximately 0.197 nm/min, nearly ten times faster than the slowest step (0.023 nm/min). The study confirms that the overall shape and dissolution rate of the entire nanoplate are governed by these slowest-moving parallel steps.
DFT calculations further revealed a hierarchy in bond strengths. Linkages along the <010> direction were found to be significantly weaker, explaining why the (100) and (-100) faces retreat the fastest. Additionally, the researchers identified that "armchair" atomic step edges dissolve much faster than "zigzag" configurations. In an armchair setup, the removal of one aluminum atom leaves its neighbor with only two remaining bonds, making it significantly easier to detach.
Conclusion
By bridging the gap between macroscopic observations and atomic-scale mechanisms, this study provides a comprehensive understanding of gibbsite dissolution. The findings highlight how internal crystal symmetry and specific bond strengths dictate the fate of the mineral surface. While future work will look to incorporate complex solvent effects into the DFT models, this methodology offers a robust framework for predicting the weathering and dissolution of other layered minerals, such as clays and micas, in various environmental and industrial contexts.
Summary updated