Analytical Chemistry represented by "super" and "ultra". Evaluation of the barrier heights of a metal-complex adsorbed gold surface by measuring the ultra-low-distance dependence of the tunnel current.

Masahiro Takahashi, Ichiro Sakata, Kazuo MiyamuraBUNSEKI 2001 · DOI

Abstract

Scanning Tunneling Microscopy (STM) allows for the evaluation of local barrier heights on sample surfaces by measuring the dependence of tunnel current on the gap width at ultra-small distances. This study demonstrates that gold substrates provide reproducible results in ambient air. By calculating the barrier heights of gold surfaces adsorbed with various metal complexes and comparing them with bare gold, the researchers attempted molecular characterization. The results showed that barrier heights for metal-complex adsorbed surfaces were distinctly different from bare gold, reflecting changes in the electronic state of the gold surface. Furthermore, different complexes yielded unique barrier heights, suggesting the potential for molecular species characterization using STM.

Introduction

Scanning Tunneling Microscopy (STM) is a powerful tool for atomic-resolution imaging. Beyond topography, it can probe electronic properties like the local barrier height (LBH), which is closely related to the work function of a surface. Identifying chemical species on a surface requires such electronic signatures. This research addresses the challenge of reliably measuring these barrier heights in ambient conditions at ultra-low distances to differentiate between similar metal-organic complexes adsorbed on gold (Au) substrates.

Methodology: Barrier Height Imaging (BHI)

The core technique used is Barrier Height Imaging (BHI). In STM, the tunnel current ($I$) decreases exponentially as the gap ($s$) between the tip and the sample increases. The relationship is defined by: $$\ln(I) \propto -\sqrt{\phi} \cdot s$$ where $\phi$ represents the barrier height. By measuring the slope of the log-current versus distance ($d\ln(I)/ds$), the local barrier height can be calculated.

Figure 1: Comparison of the logarithm of tunnel current vs. tip position for bare gold (Au) and gold adsorbed with a nickel complex (NiC6/Au). The difference in slope indicates a change in the barrier height.

The experimental setup involved gold-coated silicon wafers as substrates. Three types of "salen" metal complexes were studied: [Ni(salen)] with hexyl chains (NiC6), [Cu(salen)] with hexyl chains (CuC6), and [Ni(salen)] with ethyl chains (NiC2). These were deposited as single, organized layers using the Langmuir-Blodgett (LB) technique.

Results and Statistical Analysis

The researchers performed approximately 150 measurements per sample type to ensure statistical significance. A key finding was that the adsorption of metal complexes significantly lowers the barrier height compared to bare gold. This suggests that the molecular layer modifies the electron density at the surface, facilitating tunneling.

Figure 4: Frequency histograms and cumulative frequency curves for $d\ln(I)/ds$ measurements across different samples. (a) CuC6/Au, (b) NiC6/Au, (c) NiC2/Au, and (d) a comparison of the cumulative curves showing clear differentiation between the molecular species.

The quantitative analysis revealed distinct values for each system:

  • Bare Au: $\approx$ 0.70 eV
  • CuC6/Au: $\approx$ 0.13 eV
  • NiC6/Au: $\approx$ 0.15 eV
  • NiC2/Au: $\approx$ 0.20 eV

The technique proved sensitive enough to distinguish between different central metal ions (Cu vs. Ni) and different alkyl chain lengths (C6 vs. C2). Furthermore, the measured $d\ln(I)/ds$ values remained stable across a wide range of bias voltages (50 mV to 1000 mV), confirming that the barrier height is a robust physical property of the interface.

Conclusion

This study demonstrates that ultra-low-distance tunnel current measurements can serve as a "fingerprint" for molecules on a surface. While measurements in ambient air are influenced by environmental factors, the relative differences between molecular species are highly reproducible. This paves the way for STM to evolve into a sophisticated analytical tool capable of identifying unknown molecules at the single-molecule level.

Summary updated

BibTeX
@inproceedings{takahashi2001analytical,
  author = {Masahiro Takahashi and Ichiro Sakata and Kazuo Miyamura},
  title = {{Analytical Chemistry represented by "super" and "ultra". Evaluation of the barrier heights of a metal-complex adsorbed gold surface by measuring the ultra-low-distance dependence of the tunnel current.}},
  booktitle = {BUNSEKI},
  year = {2001},
  doi = {10.2116/bunsekikagaku.50.459},
}
Figure