Analysis of Characteristics and Design Key Points of Water Supply and Drainage Engineering for Fire Control in High-rise Buildings

Weijie LiuJournal of Architectural Research and Development 1970 · DOI

Abstract

Nowadays, our country has a relative density of population, so once a fire occurs in the building, personnel evacuation is more difficult. Since fire and water have no mercy and the fire spreads quickly, it will endanger people’s life and property safety if unable to fully guarantee the quality of water supply and drainage for fire control. Scientific and rational water supply and drainage system for fire control can effectively increase the efficiency and speed of fire rescue, reduce people’s property loss and improve the residential safety index of the building itself. In view of this, this paper mainly analyzes the characteristics and design key points of water supply and drainage engineering for fire control in high-rise buildings.

Introduction

As urban density increases, high-rise buildings present a unique challenge for fire services. Verticality complicates personnel evacuation and makes external firefighting nearly impossible at higher floors. While most engineering focus goes into "putting the fire out" (water supply), a significant gap often exists in how the aftermath is handled: water drainage.

Without a dedicated drainage strategy, the massive volume of water used to fight a fire can flood escape routes, infiltrate lower levels, and cause long-term structural damage or "prolonged immersion" of property. This paper addresses the need for an integrated approach that balances high-pressure water delivery with efficient removal systems.

Methodology

The analysis employs a case study combined with a review of engineering best practices. The primary reference point is a multi-functional 25-story building, standing 80.45 meters tall with a total area of approximately 49,000 m². This model serves to illustrate quantitative specifications and technical design pillars.

Technical Design Considerations

Fire Pump Room Optimization

Selecting pumps based on energy efficiency is paramount. The design must "rationally" adjust pump speeds to prevent overpressure while ensuring sufficient flow. Furthermore, early-stage spatial planning is required to avoid conflicts between fire pumps, wet alarm valves, and piping in often cramped pump rooms.

Hydraulic Modeling and Pressure Management

In high-rise structures, the pressure required to reach the top floor can be high enough to damage the system at the bottom—a phenomenon known as the "pressure paradox." Accurate hydraulic modeling is essential to calculate pump head and water pipe pressure, accounting for hydraulic loss and building height. This data determines the precise placement and calibration of decompression valves to maintain system integrity.

Integrated Drainage Design

Drainage is a critical fire safety requirement, not just a plumbing concern. If water from sprinklers and hoses is not discharged immediately, it creates physical obstacles for fleeing residents and can lead to "rain-water pouring" into lower, unaffected floors. The design should separate pressure pipes from pressure-free pipes and utilize basement sumps and sewage pumps to handle stagnant water effectively.

System Testing and Verification

Real-world performance must be verified against design models. This is achieved by implementing water test devices at the end of sprinkler lines to ensure the system responds correctly under operational conditions.

Case Study Results

Based on the 25-story model, the following benchmarks were established for a standard high-rise fire system:

  • Outdoor Infrastructure: A minimum of seven sets of fire hydrants in the outdoor basement area.
  • Storage Capacity: A fire pool volume exceeding 450 m³, capable of sustaining a sprinkler system for nearly two hours.
  • Roof Safety: A gravity-fed fire-fighting tank on the roof covering an area of 20 m² to provide immediate pressure.
  • Efficiency: Scientific and rational design significantly improves the "residential safety index" by reducing the time required for fire rescue.

Conclusion and Future Directions

While this analysis provides a qualitative overview of design principles, it highlights the need for further empirical research. Future work should incorporate:

  • Simulation Data: Using software to model water flow and drainage patterns in high-rise stairwells during active fire scenarios.
  • Material Science: Exploring the performance of various piping materials under extreme heat.
  • Automation: Investigating how IoT sensors and advanced automatic sprinkler systems can improve sensitivity testing and response times.

By integrating robust supply mechanisms with efficient drainage, engineers can ensure that high-rise buildings remain safe environments even in the face of fire emergencies.

Summary updated

Abstract

Nowadays,our country has a relative density of population, so once a fire occurs in the building, personnel evacuation is more difficult. Since fire and water have no mercy and the fire spreads quickly, it will endanger people’s life and property safety if unable to fully guarantee the quality of water supply and drainage for fire control. Scientific and rational water supply and drainage system for fire control can effectively increase the efficiency and speed of fire rescue, reduce people’s property loss and improve the residential safety index of the building itself. In view of this, this paper mainly analyzes the characteristics and design key points of water supply and drainage engineering for fire control in high-rise buildings.Â
BibTeX
@article{liu1970analysis,
  author = {Weijie Liu},
  title = {{Analysis of Characteristics and Design Key Points of Water Supply and Drainage Engineering for Fire Control in High-rise Buildings}},
  journal = {Journal of Architectural Research and Development},
  year = {1970},
  doi = {10.26689/jard.v1i2.129},
}
Figure