Analysis and Taxonomy of Optimal Current Setpoints for Five-phase Synchronous Motor Drives

Jan Laksar, Tomáš Komrska, Václav Šmídl, Ondřej Suchý, Zdeněk Frank, Lukáš Adam, Zdeněk Peroutka

Abstract

The optimal current setpoints for three-phase machines are known to be divided into operating regions of smooth solutions, such as the Maximum torque per ampere (MTPA) and the Field weakening (FW) regions. These regions are switched at critical points, such as reaching the maximum of the voltage waveform. This paper presents a hypothesis that a general solution of the current setpoints of multiphase machines has the same form. To support this claim, optimal setpoints of a five-phase machine are computed numerically and analyzed from the perspective of constrained optimization theory. A taxonomy of smooth regions generalizing MTPA and FW to five-phase machines is identified. The number of regions of a five-phase machine increases to 9 due to a higher number of constraints arising from more complicated waveforms of phase current and voltage. Moreover, a polynomial approximation of the smooth regions as well as their boundaries is developed and shown to have low approximation error. It is applied to represent optimal setpoints as a function of the requested torque and rotational speed; however, it naturally extends to other parameters of the machine. This is demonstrated by a sensitivity study of the value of the permanent magnet flux and injection of a zero-sequence component (ZSC) of the voltage vector. The theory is validated experimentally on a laboratory prototype of a five-phase PMSM drive of 3 kW.
BibTeX
@article{laksar2026analysis,
  author = {Jan Laksar and Tomáš Komrska and Václav Šmídl and Ondřej Suchý and Zdeněk Frank and Lukáš Adam and Zdeněk Peroutka},
  title = {{Analysis and Taxonomy of Optimal Current Setpoints for Five-phase Synchronous Motor Drives}},
  journal = {IEEE Trans. Industrial Electronics},
  year = {2026},
  doi = {10.1109/tie.2025.3618891},
}

Loading related content...

Figure