An Open-Source Modular Robotic System for Telepresence and Remote Disinfection

Andre Potenza, Andrey Kiselev, Alessandro Saffiotti, Amy LoutfiarXiv 2021 · arXiv

Introduction

The COVID-19 pandemic exposed significant vulnerabilities in healthcare infrastructure, particularly the need for technologies that minimize physical contact between staff and patients while maintaining rigorous hygiene standards. While commercial mobile robots offer potential solutions, they are frequently expensive, proprietary "black boxes" that are difficult for researchers or clinicians to adapt. Furthermore, Hospital-Acquired Infections (HAIs) continue to be a major healthcare challenge. Ultraviolet-C (UVC) light is an effective germicide but poses risks to humans, making robotic delivery an ideal solution.

Researchers at Örebro University have addressed these challenges by developing an open-source, modular mobile robot. Designed for rapid deployment using off-the-shelf components and 3D-printed parts, this system provides a low-cost, customizable platform for both remote telepresence and UVC-based disinfection.

System Architecture and Modularity

The robot's design philosophy centers on modularity and accessibility. The hardware utilizes an open-frame construction based on T-slot aluminum extrusions, allowing for easy mounting of various sensors and payloads.

The modular robot platform shown in three configurations: a CAD model of the base frame, the disinfection configuration with UVC lamps, and the telepresence configuration with a 22-inch touchscreen.

As shown in Figure 3, the system can be rapidly reconfigured. In telepresence mode, it features a 22-inch touchscreen for high-fidelity remote interaction. Alternatively, this can be swapped for a semicircular array of four 16.7W UVC lamps for targeted disinfection of high-touch surfaces.

Software Stack and Connectivity

The software architecture is built on ROS (Robot Operating System) Noetic running on Ubuntu 20.04. A standout feature of the system is its "Browser-as-Interface" approach. By integrating WebRTC for low-latency audio/video and PeerJS for signaling, the team enabled robot control through any standard web browser.

Detailed software architecture illustrating the integration of ROS with WebRTC and PeerJS to enable low-latency browser-based control.

This architecture (Figure 2) facilitates NAT traversal, allowing operators to control the robot from outside the local network without complex firewall configurations. This accessibility is crucial for healthcare workers who may need to interact with the system from various devices and locations.

Adaptable Autonomy and Navigation

To assist remote operators in complex environments, the robot features "adaptable autonomy" with three distinct navigation levels:

  1. Manual Control: Direct teleoperation via the web interface.
  2. Assisted Navigation: The robot utilizes 2D LIDAR to monitor surroundings, automatically decelerating or steering away from obstacles while the user provides general directional input.
  3. Semi-Autonomous Navigation: Users can select a destination on a generated map, and the robot employs the ROS navigation stack to autonomously plan and execute a path.

Performance and Results

The prototype stands 1.65m tall and weighs between 13.6kg and 17.5kg depending on the payload. It is powered by two 12V LiFePo4 batteries, providing approximately 3 hours of operational runtime.

In disinfection mode, the UVC array delivers a maximum intensity of 35.8 µW/cm² at a distance of 1 meter. While effective for "spot cleaning" high-touch areas, the authors note that UVC should be viewed as a complement to manual cleaning rather than a total replacement, due to line-of-sight requirements and the inverse square law of light intensity.

The integration of ROS with WebRTC via a rosbridge_server ensures transparent communication of control messages and telemetry, providing the remote user with real-time situational awareness and low-latency control.

Limitations and Future Outlook

While the current system demonstrates the viability of an open-source modular approach, several areas for improvement remain:

  • Manipulation: The lack of a robotic arm prevents the system from opening doors or using elevators, limiting its autonomy in multi-room facilities.
  • UVC Power: Future iterations may explore higher-wattage lamps or UVC-LED arrays to decrease disinfection cycle times.
  • Ethics and Privacy: The authors emphasize the need for robust access management to protect patient privacy as telepresence robots enter sensitive environments.
  • Advanced Perception: Future work will focus on using machine learning to automatically identify high-priority surfaces for disinfection based on visual data.

By releasing the blueprints and source code, the researchers hope to foster a community-driven approach to robotic healthcare solutions, bypassing the intellectual property bottlenecks that often hinder rapid innovation during public health crises.

Summary updated

Abstract

In a pandemic contact between humans needs to be avoided wherever possible. Robots can take over an increasing number of tasks to protect people from being exposed to others. One such task is the disinfection of environments in which infection spread is particularly likely or bears increased risks. It has been shown that UVC light is effective in neutralizing a variety of pathogens, among others the virus causing COVID-19, SARS-CoV-2. Another function which can reduce the need for physical proximity between humans is interaction via telepresence, i.e., the remote embodiment of a person controlling the robot. This work presents a modular mobile robot for telepresence and disinfection with UVC lamps. Both operation modes are supported by adaptable autonomy navigation features for facilitating efficient task execution. The platform's primary contributions are its hardware and software design, which combine consumer-grade components and 3D-printed mounting with open-source software frameworks.
BibTeX
@misc{potenza2021open,
  author = {Andre Potenza and Andrey Kiselev and Alessandro Saffiotti and Amy Loutfi},
  title = {{An Open-Source Modular Robotic System for Telepresence and Remote Disinfection}},
  year = {2021},
  eprint = {2102.01551},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2102.01551},
}
Figure