Modular Robotic Design and Reconfiguration

143 concepts107 papers1 proposal

Traditional robotics treats a robot as a monolithic, unchangeable entity. If an industrial arm needs to reach around a tight corner, or a drone loses a rotor, the system fails because its hardware topology is fixed. This rigid paradigm forces engineers to build highly specialized machines for narrow use cases, creating systems that are expensive to manufacture, difficult to maintain, and brittle in changing environments.

Modular robotic design breaks this bottleneck by treating a robot as an assembly of discrete, interchangeable building blocks. By standardizing physical, electrical, and computational interfaces, a single robotic system can morph to match the task at hand. As Andrew P. Murray et al. note in Special Issue: Selected Papers From IDETC 2017, this strategy enables task-specific adaptation through the simple rearrangement of standardized components, shifting the engineering challenge from custom hardware fabrication to algorithmic configuration.

Physical Modularity: Homogeneity and Encapsulation

To build a physical system that can change shape without becoming impossibly complex, researchers rely on two primary architectural patterns: homogeneous module replication and heterogeneous component encapsulation.

The homogeneous approach uses identical units as universal building blocks for the entire robot. This simplifies manufacturing and logistics because any single module can fulfill any role within the assembly. For example, Dimuthu D. K. Arachchige et al. demonstrate in Soft Steps: Exploring Quadrupedal Locomotion With Modular Soft Robots that a soft quadruped can be constructed entirely from identical pneumatic modules serving as both the limbs and the central chassis. This transforms soft robotics from a complex, monolithic molding process into a scalable assembly of discrete units.

In aerial robotics, this homogeneity provides inherent fault tolerance. Mengguang Li et al. show in A Modular Aerial System Based on Homogeneous Quadrotors with Fault-Tolerant Control how snapping together identical, simple quadrotors allows the combined system to achieve full 6-degree-of-freedom control—a capability a single standard quadrotor lacks—while remaining robust to individual rotor or battery failures.

[Monolithic Design] ---> Fixed Topology ---> Single Point of Failure
[Modular Design]    ---> Homogeneous Units -> Scalable & Fault-Tolerant

When a robot requires diverse functionalities, engineers turn to encapsulation—packing motors, gears, and electronics into self-contained joint or actuator modules. Tamim Asfour et al. leverage this in ARMAR-6: A High-Performance Humanoid for Human-Robot Collaboration in Real-World Scenarios, where self-contained joints distribute power and communication across a complex humanoid structure. This encapsulation abstracts away the underlying mechanical complexity, presenting a standardized hardware-software interface for the rest of the system.

Overcoming the Maintenance Barrier

If a robot consists of dozens of independent modules, the probability of an individual component failing increases. Modular design turns this vulnerability into a strength by making parts trivial to service or replace in the field.

By combining additive manufacturing with toolless connectors, modular platforms eliminate the need for specialized repair infrastructure. Michael Ahn et al. demonstrate in ROBEL: Robotics Benchmarks for Learning with Low-Cost Robots that pairing 3D-printed structural parts with daisy-chained smart actuators creates affordable, repairable platforms. This design allows the robot to withstand the physical wear and tear of aggressive reinforcement learning exploration, as broken limbs can be swapped out in minutes.

To accelerate this physical swapping, permanent fasteners are replaced with rapid-interface mechanisms:

Hardware-Software Decoupling

The primary challenge of modular robotics is not physical assembly, but control. In traditional robotics, control software is hard-coded to a specific hardware geometry. If you change a robot's physical layout, its kinematic equations change completely, causing conventional software stacks to break.

To solve this, modern modular architectures decouple high-level task logic from low-level hardware configurations using standardized description formats and unified APIs.

+---------------------------------------+
|          High-Level Task Logic        |
+---------------------------------------+
                    |
                    v
+---------------------------------------+
|   Unified API / Semantic Abstraction  |
+---------------------------------------+
                    |
     +--------------+--------------+
     |                             |
     v                             v
[Configuration A:             [Configuration B:
 Mobile Base + Arm]            Quadrupedal Chassis]

In BestMan: A Modular Mobile Manipulator Platform for Embodied AI with Unified Simulation-Hardware APIs, Yan Ding et al. model robots as assemblies of independent units (such as wheels, arms, and grippers) using standardized description formats. Because the software interacts with these modules through a unified API, the underlying control logic remains valid even if the physical hardware is reconfigured.

This abstraction is further enhanced by semantic frameworks. Alexander Perzylo et al. show in Multimodal Binding of Parameters for Task-based Robot Programming Based on Semantic Descriptions of Modalities and Parameter Types that semantic parameter binding allows task logic to remain entirely independent of specific input hardware. New sensors or interaction modalities can be integrated into the system by updating semantic descriptions rather than rewriting the core task software.

Algorithmic Configuration Selection

Once hardware and software are successfully modularized, the system faces a new question: Which physical shape is optimal for a given task? Instead of relying on human intuition to design the robot, end-to-end planning systems can autonomously synthesize the optimal form.

Gangyuan Jing et al. address this in An End-to-End System for Accomplishing Tasks with Modular Robots: Perspectives for the AI community by integrating a high-level planner with a curated design library. This library stores pre-defined robot configurations and their associated behaviors, tagged with environmental and functional properties. When a multi-part task is assigned, the system autonomously selects the appropriate robot forms and actions from the library to execute the mission.

To make this practical for dynamic industrial environments, Andrea Giusti et al. demonstrate in Flexible Automation Driven by Demonstration: Leveraging Strategies that Simplify Robotics that automated search algorithms can evaluate millions of potential modular robot configurations for reachability, stability, and efficiency on the fly. This optimization allows hardware to be rapidly reconfigured to meet the shifting demands of high-mix, small-scale manufacturing, fulfilling the ultimate promise of modular robotics: a single system capable of fluidly adapting its physical body to match the digital logic of its software.

History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_modular_robotic_design_df7517f9,
  title = {modular robotic design},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/modular-robotic-design/rdr_df7517f9339041ec8d242b943f9c7e21},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-20},
}

This exact version (version 1, frozen text):

@misc{lacuna_modular_robotic_design_df7517f9_v1,
  title = {modular robotic design},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/modular-robotic-design/rdr_df7517f9339041ec8d242b943f9c7e21/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-20},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake