An Open-Source 3D Printed Three-Fingered Robotic Gripper for Adaptable and Effective Grasping

Francisco Yumbla, Emiliano Quinones Yumbla, E. E. Mendoza, Cristobal Lara, Javier Pagalo, Efraín Terán, Redhwan Algabri, Myeongyun Doh, Tuan Luong, Hyungpil MoonBiomimetics 2025 · DOI

TL;DR

This paper presents an open-source, 3D-printed, three-fingered robotic gripper designed for adaptable and effective grasping. Leveraging additive manufacturing and readily available components, it offers a low-cost, efficient, and versatile solution for industrial and research applications, aiming to democratize advanced robotic manipulation.

What Problem Does This Paper Address?

The human hand is a marvel of dexterity, capable of manipulating a vast array of objects with remarkable adaptability. While robotic grippers are essential for industrial automation and scientific research, existing solutions often fall into two camps: simple, two-finger grippers that lack adaptability for diverse objects, or highly sophisticated, multi-finger grippers that come with prohibitive costs. This leaves a gap for affordable, yet versatile, robotic hands that can handle a wide range of objects and tasks. The paper addresses the need for a low-cost, easily integrated, and adaptable gripper that can perform various grasping strategies, bridging the gap between basic industrial grippers and expensive, specialized systems.

Methods

The core of this project is the design and fabrication of a three-fingered adaptive gripper using additive manufacturing (3D printing).

  • Materials: Polylactic Acid (PLA) is used for the rigid mechanical components, providing structural integrity. Thermoplastic Polyurethane (TPU) is employed for flexible membranes in the fingertips, crucial for distributing pressure and enhancing grip.
  • Design: The gripper features three fingers, each with two rotational degrees of freedom (DOF), allowing for adaptable positioning. An additional DOF is introduced by allowing two fingers to rotate inwards and outwards, controlled by a servomotor and bevel gear mechanism. This modular design aims for easy assembly, maintenance, and part replacement.
  • Sensing: Force-sensing resistors (FSRs) are integrated into the fingertips to provide tactile feedback on applied force. A magnetic encoder is used for precise joint position feedback.
  • Control: A closed-loop PID control system, implemented on an Arduino Mega, manages the joint positions based on feedback from the encoders. A servomotor controls the overall gripper posture for different grip types.
  • Analysis: Stress and deformation analyses were performed using Autodesk Inventor to evaluate the mechanical integrity and performance of the 3D-printed components under load. Force analysis was conducted to determine the required motor torque and ensure secure grasping.

Datasets

Not discussed in the paper. The paper focuses on the design, simulation, and physical prototyping of the gripper, with validation performed through tests on an ABB IRB2600 industrial robot.

Key Insights and Ideas

  • Additive Manufacturing as an Enabler: 3D printing (FDM) is highlighted as a key technology for creating complex, low-cost robotic components, enabling rapid prototyping and iteration of designs.
  • TPU for Adaptive Grasping: The use of flexible TPU membranes in the fingertips is crucial for distributing pressure evenly, allowing the gripper to conform to irregular object shapes and improve grip stability.
  • Modularity for Accessibility: Designing the gripper with modular components significantly simplifies assembly, maintenance, and repair, making it more accessible for researchers and hobbyists.
  • Balancing Cost and Functionality: The project successfully demonstrates that a high degree of adaptability and functionality can be achieved without resorting to expensive, specialized components, making advanced robotic manipulation more attainable.
  • Integrated Sensing for Control: The combination of position encoders and force sensors provides essential feedback for precise control and safe interaction with objects.

Key Results

  • Successful Grasping: The prototype gripper was successfully tested on an ABB IRB2600 industrial robot, demonstrating its ability to effectively grasp various objects, including a soda can and a pencil.
  • Multiple Grip Types: The gripper demonstrated adaptability to perform different grasping configurations, including cylindrical, pincer, and flat grips.
  • Force Sensing Range: The integrated FSR sensors were verified to function within a force range of 0.98 N to 98 N, providing useful tactile feedback.
  • Mechanical Integrity: Stress and deformation analyses indicated that the 3D-printed components possess sufficient strength and resilience for the intended applications.
  • Low-Cost Solution: The use of 3D printing and readily available electronic components results in a significantly lower cost compared to commercial adaptive grippers.

Limitations and Future Work

  • Limited Object Weight: While the gripper can handle objects up to 3 kg, this is a limitation for heavier industrial applications.
  • Material Properties: The paper notes that while ABS was used for simulation, PLA was used for prototyping. Further investigation into the long-term durability and performance of PLA under repeated stress might be beneficial.
  • Control System Refinement: While a PID controller was implemented, further tuning and advanced control strategies could potentially enhance performance and adaptability.
  • Integration Complexity: While designed for integration, the paper mentions the need for a computer to act as a communication bridge, suggesting that direct integration with some robotic arms might require further development.
  • Future Work: The authors suggest that future work could involve exploring different materials, enhancing the sensing capabilities, and developing more sophisticated control algorithms to further improve the gripper's performance and expand its application range.

Summary updated

Abstract

This research focuses on the design of a three-finger adaptive gripper using additive manufacturing and electromechanical actuators, with the purpose of providing a low-cost, efficient, and reliable solution for easy integration with any robot arm for industrial and research purposes. During the development phase, 3D printing materials were employed in the gripper's design, with Polylactic Acid (PLA) filament used for the rigid mechanical components and Thermoplastic Polyurethane (TPU) for the flexible membranes that distribute pressure to the resistive force sensors. Stress analysis and simulations were conducted to evaluate the performance of the components under load and to gradually refine the design of the adaptive gripper. It was ensured that the mechanism could integrate effectively with the robotic arm and be precisely controlled through a PID controller. Furthermore, the availability of spare parts in the local market was considered essential to guarantee easy and cost-effective maintenance. Tests were conducted on an actual robotic arm, and the designed gripper was able to effectively grasp objects such as a soda can and a pencil. The results demonstrated that the adaptive gripper successfully achieved various types of grasping, offering a scalable and economical solution that represents a significant contribution to the field of robotic manipulation in industrial applications.
BibTeX
@inproceedings{yumbla2025open,
  author = {Francisco Yumbla and Emiliano Quinones Yumbla and E. E. Mendoza and Cristobal Lara and Javier Pagalo and Efraín Terán and Redhwan Algabri and Myeongyun Doh and Tuan Luong and Hyungpil Moon},
  title = {{An Open-Source 3D Printed Three-Fingered Robotic Gripper for Adaptable and Effective Grasping}},
  booktitle = {Biomimetics},
  year = {2025},
  doi = {10.3390/biomimetics10010026},
}
Figure