An Automated FPGA-based Framework for Rapid Prototyping of Nonbinary LDPC Codes

Yaoyu Tao, Qi Wu

Abstract

Nonbinary LDPC codes have shown superior performance close to the Shannon limit. Compared to binary LDPC codes of similar lengths, they can reach orders of magnitudes lower error rate. However, multitude of design freedoms of nonbinary LDPC codes complicates the practical code and decoder design process. Fast simulations are critically important to evaluate the pros and cons. Rapid prototyping on FPGA is attractive but takes significant design efforts due to its high design complexity. We propose a high-throughput reconfigurable hardware emulation architecture with decoder and peripheral co-design. The architecture enables a library and script-based framework that automates the construction of FPGA emulations. Code and decoder design parameters are programmed either during run time or by script in design time. We demonstrate the capability of the framework in evaluating practical code and decoder design by experimenting with two popular nonbinary LDPC codes, regular (2, dc) codes and quasi-cyclic codes: each emulation model can be auto-constructed within hours and the decoder delivers excellent error-correcting performance on a Xilinx Virtex-5 FPGA with throughput of up to hundreds of Mbps.

Introduction

Low-Density Parity-Check (LDPC) codes are a cornerstone of modern digital communications, providing robust error correction for standards ranging from Wi-Fi to satellite links. Nonbinary (NB) LDPC codes extend these capabilities, offering superior performance—often orders of magnitude lower error rates—compared to binary LDPC codes of similar lengths. However, this performance comes at the cost of increased design complexity. NB-LDPC codes possess numerous "design freedoms," such as Galois field orders, message truncation numbers, and quantization bits, which must be meticulously tuned to balance error-correcting performance against hardware costs.

Evaluating these parameters is a significant bottleneck. Software-based simulations are too slow to explore the "error floor" region (bit error rates as low as $10^{-9}$), which is vital for industrial reliability. While FPGA-based emulation offers the necessary speed, manually designing a custom hardware decoder for every new code variation typically requires weeks or months of engineering effort. This paper presents an automated framework that slashes this prototyping time to just a few hours.

Automated Design and Configuration Flow

The proposed framework treats hardware design with the agility of software compilation. By utilizing a library of pre-verified "elementary blocks" and an automated script-based assembly line, the system removes the need for manual RTL (Register Transfer Level) coding for every new experiment.

The automated design flow from high-level code parameters to FPGA evaluation.

The flow begins with a Matlab pre-processing script that takes the desired code and decoder parameters (e.g., field order $q$, row degree $d_c$, and quantization bits $Q$). Local "router" scripts then connect elementary building blocks—such as Check Nodes (CN) and Variable Nodes (VN)—into larger modules. Finally, global routing scripts assemble these modules into a complete FPGA model, including the necessary interfaces for run-time parameter adjustment.

Reconfigurable Hardware Architecture

To support rapid prototyping, the framework employs a reconfigurable "lab-on-a-chip" architecture. This system integrates the decoder with all necessary peripheral components for full-system emulation.

Block diagram of the reconfigurable hardware emulation architecture, featuring the Prior Generator and Decoder subsystems.

The architecture consists of three primary subsystems:

  1. Prior Generator: Simulates Additive White Gaussian Noise (AWGN) channel conditions and calculates log-likelihood ratios (LLRs) in real-time.
  2. NB-LDPC Decoder: Supports high-performance algorithms like Extended Min-Sum (EMS) and Min-Max (MM). It utilizes a "dual-path" pipeline schedule to maximize throughput by overlapping forward, backward, and merge decoding steps.
  3. Error Collector: Tracks performance metrics such as Frame Errors (FE), Symbol Errors (SE), and Bit Errors (BE) to provide immediate feedback to the designer.

Experimental Evaluation and Results

The framework was validated using two popular classes of NB-LDPC codes: regular $(2, d_c)$ codes and Quasi-Cyclic (QC) codes. All tests were conducted on a Xilinx Virtex-5 FPGA. Key findings include:

  • Rapid Turnaround: A complete, working FPGA emulation model can be auto-constructed and synthesized within hours, compared to months for manual design.
  • High Throughput: The decoders achieved throughputs in the hundreds of Mbps, significantly outperforming prior specialized emulators.
  • Deep Error Analysis: The system reached a bit error rate (BER) of $10^{-9}$ in just one day of testing—a feat that would take months using standard CPU-based software simulations.
  • Hardware Efficiency: For a 960-bit code, the design utilized only 15-18% of the available Slice Registers, demonstrating high area efficiency and leaving room for parallel decoder cores.

Conclusion

This automated framework bridges the gap between the theoretical advantages of NB-LDPC codes and their practical implementation. By automating the hardware design process, researchers can rapidly explore the vast design space of nonbinary codes, reaching deep error floors in a fraction of the time previously required. Future work may extend this framework to irregular codes and more modern FPGA toolchains to further enhance throughput and flexibility.

Summary updated

Abstract

Nonbinary LDPC codes have shown superior performance close to the Shannon limit. Compared to binary LDPC codes of similar lengths, they can reach orders of magnitudes lower error rate. However, multitude of design freedoms of nonbinary LDPC codes complicates the practical code and decoder design process. Fast simulations are critically important to evaluate the pros and cons. Rapid prototyping on FPGA is attractive but takes significant design efforts due to its high design complexity. We propose a high-throughput reconfigurable hardware emulation architecture with decoder and peripheral co-design. The architecture enables a library and script-based framework that automates the construction of FPGA emulations. Code and decoder design parameters are programmed either during run time or by script in design time. We demonstrate the capability of the framework in evaluating practical code and decoder design by experimenting with two popular nonbinary LDPC codes, regular (2, dc) codes and quasi-cyclic codes: each emulation model can be auto-constructed within hours and the decoder delivers excellent error-correcting performance on a Xilinx Virtex-5 FPGA with throughput of up to hundreds of Mbps.
BibTeX
@misc{tao2022automated,
  author = {Yaoyu Tao and Qi Wu},
  title = {{An Automated FPGA-based Framework for Rapid Prototyping of Nonbinary LDPC Codes}},
  year = {2022},
  eprint = {2202.07295},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2202.07295},
}
Figure