An Approach for the Dynamic Reliability Assessment of the Digital Power Control System for Nuclear Reactor

Maolei Gui, Yang Sui, Rui Ding, Shangpeng Xing, Tao Yu, Jintao Xu, Baosong Yang, Fanpeng MengFrontiers in Energy Research 2022 · DOI

TL;DR

Researchers have developed a hybrid modeling approach to assess the reliability of digital power control systems in nuclear reactors. By combining Dynamic Fault Tree Analysis (DFTA), Dynamic Bayesian Networks (DBN), and Fuzzy Mathematics, the study provides a more realistic way to account for time-dependent failures and the "fuzzy" uncertainties of human and software interactions, identifying computer systems as the most critical points of failure.

What Problem Does This Paper Address?

The Digital Power Control System for Nuclear Reactor (DPCSNR) is the "brain" of a nuclear power plant, managing startup, shutdown, and power regulation. Unlike older analog systems, these digital setups are incredibly complex, involving intricate interactions between hardware, software, and human operators.

Traditional reliability assessments often use static "Fault Trees"—logical diagrams showing how component failures lead to system failure. However, static models struggle with three "dynamic" realities:

  1. Dynamic Interaction: Some failures only matter if they happen in a specific sequence.
  2. Time Dependence: The probability of a component failing changes as it ages or after it undergoes maintenance.
  3. Causal Uncertainty: We don't always have perfect data on how a software glitch or a human error leads to a specific hardware failure.

The authors aim to bridge this gap by creating a model that evolves over time and accounts for the inherent "fuzziness" of expert judgment.

Methods

The authors proposed a multi-layered framework:

  • Dynamic Fault Tree Analysis (DFTA): They first mapped out the system using dynamic gates like Priority-AND (PAND) and Sequence Enforcing (SEQ). This captures the logic of redundant systems (e.g., if Computer A fails, the system only crashes if the switch to Computer B also fails).
  • Dynamic Bayesian Networks (DBN): To handle the passage of time, they converted the Fault Tree into a DBN. This allows the model to look at "time slices," where the state of a component at time $t$ is influenced by its state at $t-1$. This is computationally more efficient than traditional Markov chain models for complex systems.
  • Fuzzy Mathematics (FM): Because precise failure data for new digital systems is often scarce, the authors used fuzzy logic to process expert opinions. They converted qualitative terms (like "very low" or "high" risk) into quantitative "trapezoidal fuzzy numbers" to refine the Conditional Probability Tables (CPT) within the Bayesian network.
  • Monte Carlo (MC) Simulation: Finally, they used a Monte Carlo simulation (running the model 100,000 times) to verify that their DBN approach was accurate.

Datasets

The study did not use a single "big data" set but rather synthesized parameters from several high-reliability sources:

  • Probabilistic Safety Analysis Reports: Data for hardware failure rates were pulled from U.S. Nuclear Regulatory Commission (NRC) reports and established literature (e.g., Gertman et al., 2005).
  • Expert Elicitation: For the fuzzy logic component, senior experts in nuclear operation and maintenance provided the qualitative assessment languages used to handle causal uncertainty.

Key Insights and Ideas

  • The "Memory" of the System: By using DBNs, the model acknowledges that a system’s reliability today is fundamentally linked to its state yesterday. This is crucial for modeling "cold spares"—backup components that don't age until they are turned on.
  • Quantifying the Vague: One of the most interesting aspects is the use of Fuzzy Mathematics to handle the "causal relationship uncertainty." It acknowledges that even if an input event occurs (like a sensor failure), the output event (system failure) isn't always a 1 or 0 probability; there’s a gray area that expert intuition can help fill.
  • Maintenance Matters: The model quantitatively demonstrates the massive impact of periodic testing. Without maintenance, reliability drops significantly over a two-year period, but with a 60-day maintenance cycle, the system remains remarkably stable.

Key Results

  • System Reliability: Under a regime of periodic tests and predictable maintenance (every 60 days), the DPCSNR achieved a dynamic reliability of 99.959%.
  • The "Weakest Link": Through sensitivity analysis, the researchers identified that computer systems (A3 and B3) are the most critical events leading to failure. They have a higher impact on system-wide reliability than the Automatic Conversion Units (ACU) or manual units.
  • Model Validation: The DBN model showed a maximum relative error of only 1.08% when compared to the gold-standard Monte Carlo simulation, proving it is both accurate and computationally viable.

Limitations and Future Work

The authors acknowledge a few areas for improvement:

  • Simplification of Software: In this study, the computer system was largely treated as hardware. In reality, software failure rates are notoriously difficult to predict and often don't follow the same "aging" distributions as hardware.
  • Common Cause Failures: The study assumes many failures are independent. Future work could better integrate "common cause failures"—where a single event (like a fire or a specific software bug) knocks out both the primary and redundant systems simultaneously.
  • Data Fusion: The authors suggest using Dempster-Shafer evidence theory in the future to better calculate failure rates when data from different sources (experts vs. sensors) conflict.

Summary updated

Abstract

The digital power control system for nuclear reactor (DPCSNR) for a nuclear power plant has dynamic characteristics including dynamic interaction, time dependence, and causal relationship uncertainty, and it is of great significance to assess its dynamic reliability. This study aimed to propose an approach for the dynamic reliability assessment of the DPCSNR with dynamic characteristics. First, the dynamic fault tree analysis (DFTA) method was used to establish a DFT characterizing the dynamic interaction for the DPCSNR. Then, the dynamic Bayesian network (DBN) method was used to transform the DFT into the initial DBN (IDBN) model characterizing the dynamic interaction and time dependence for the DPCSNR. Furthermore, the fuzzy mathematics (FM) method was used to modify the conditional probability table (CPT) characterizing the causal relationship uncertainty in the IDBN model and to establish the DBN model characterizing the dynamic interaction, time dependence, and causal relationship uncertainty for the DPCSNR. Finally, DBN reasoning was applied to assess the dynamic reliability of the DPCSNR. The results showed that the system reliability under conditions of periodic tests and predictable maintenance was 99.959%, and the computer system was the most critical event of the DPCSNR failure.
BibTeX
@inproceedings{gui2022approach,
  author = {Maolei Gui and Yang Sui and Rui Ding and Shangpeng Xing and Tao Yu and Jintao Xu and Baosong Yang and Fanpeng Meng},
  title = {{An Approach for the Dynamic Reliability Assessment of the Digital Power Control System for Nuclear Reactor}},
  booktitle = {Frontiers in Energy Research},
  year = {2022},
  doi = {10.3389/fenrg.2022.877933},
}
Figure