An adsorbed gas estimation model for shale gas reservoirs via statistical learning

Yuntian Chen, Su Jiang, Dongxiao Zhang, Chaoyang LiuApplied Energy 2017 · DOI · arXiv

Abstract

Adsorbed gas can account for up to 80% of shale gas resources. Traditional estimation methods rely on the Langmuir model, which requires expensive and time-consuming laboratory experiments to determine Langmuir pressure ($P_L$) and volume ($V_L$). This study introduces a statistical learning approach to estimate these parameters using readily available geological data: Total Organic Carbon (TOC), Thermal Maturity ($R_o$), and Reservoir Temperature (T). Leveraging a comprehensive dataset of 301 entries from 19 global reservoirs, the proposed model significantly improves estimation accuracy, particularly in extreme geological conditions, providing a cost-effective tool for large-scale reservoir evaluation.

Introduction: The Challenge of Adsorbed Gas Estimation

Evaluating shale gas resources is a critical task in petroleum engineering. Shale gas is stored in three primary states: as free gas in pores, dissolved in fluids (solution gas), and adsorbed onto the surfaces of organic matter and clays. Adsorbed gas is particularly significant, often representing the majority of the total resource.

Schematic representation of gas storage mechanisms in shale reservoirs.

The industry standard for estimating adsorbed content is the Langmuir model. However, obtaining the necessary parameters—$P_L$ and $V_L$—typically requires physical rock samples (coring) and lengthy laboratory adsorption experiments. These processes are not only expensive but also time-consuming. Furthermore, existing empirical models often suffer from poor generalization due to their reliance on limited datasets, frequently consisting of fewer than 10 data points.

Methodology: A Statistical Learning Framework

To overcome these limitations, this research proposes a shift from physical experimentation to statistical learning. The model estimates $P_L$ and $V_L$ using easily obtainable geological markers: TOC, $R_o$, and Reservoir Temperature (T).

Workflow of the statistical learning model for adsorbed gas estimation.

The technical workflow involves several key stages:

  1. Data Preprocessing: The K-Nearest Neighbor (K-NN) algorithm was employed for outlier detection to remove noisy data points that deviated from physical geological continuity.
  2. Variable Selection: Correlation analysis identified the primary drivers of adsorption. The researchers found that simplifying the model by substituting certain variables (like porosity) with TOC and T maintained accuracy while increasing the usable dataset size 2.5-fold.
  3. Regression Modeling: Multivariate regression submodels for $P_L$ and $V_L$ were developed using logarithmic treatments to account for data decay characteristics.
  4. Validation: The model underwent rigorous leave-one-out cross-validation to ensure robust generalization and prevent overfitting.

Global Dataset and Performance

The study utilized a "big data" approach, compiling 301 data entries from 24 studies covering 19 reservoirs across seven countries, including the U.S.A., Canada, China, Germany, Sweden, Brazil, and the Netherlands.

The model demonstrated superior performance compared to traditional empirical formulas across several metrics:

  • Accuracy: The $P_L$ submodel achieved an average relative error of 27.67%, while the $V_L$ submodel reached 23.76%.
  • Robustness in Extremes: In high-temperature scenarios (>65°C), the model reduced relative error by over 15%. In high-maturity ($R_o$) scenarios, error rates dropped to 33.6%, a significant improvement over the 60-70% seen in older models.
  • Field Validation: Application to the Sichuan Basin in China yielded an estimation of 1.31 $m^3/t$, aligning closely with independent observations (1.12–1.74 $m^3/t$).

Conclusion

This statistical learning approach provides a high-accuracy, low-cost alternative to laboratory-intensive adsorption experiments. While it serves as an approximate estimation tool for large-scale evaluation rather than a direct replacement for localized rock analysis, its ability to leverage widely available geological data makes it a powerful asset for global shale play assessment. Future refinements may include the integration of clay content to further enhance model complexity and precision.

Summary updated

BibTeX
@inproceedings{chen2017adsorbed,
  author = {Yuntian Chen and Su Jiang and Dongxiao Zhang and Chaoyang Liu},
  title = {{An adsorbed gas estimation model for shale gas reservoirs via statistical learning}},
  booktitle = {Applied Energy},
  year = {2017},
  doi = {10.1016/j.apenergy.2017.04.029},
}
Figure