All-Inorganic Quantum-Dot Light-Emitting Diodes with Reduced Exciton Quenching by a MgO Decorated Inorganic Hole Transport Layer

Yibin Jiang, Le Jiang, Fion Sze Yan Yeung, Ping Xu, Shuming Chen, Hoi Sing Kwok, Guijun LiACS 2019 · DOI

Abstract

Here, wide-bandgap magnesium oxide (MgO) is employed as a decorator for the nickel oxide (NiO <sub>x</sub>) hole transport layer (HTL), by means of a bulk dopant as well as a surface modifier. QLEDs with Ni<sub>0.88</sub>Mg<sub>0.12</sub>O <sub>x</sub> serving as the HTL achieve an ∼19.5% efficiency improvement compared to devices using pristine NiO <sub>x</sub>. Further inserting an ultrathin MgO layer between the Ni<sub>0.88</sub>Mg<sub>0.12</sub>O <sub>x</sub> and QDs to separate the accumulated charges from excitons goes on boosting the peak efficiency by another ∼35%. Finally, a maximum brightness over 40 000 cd/m<sup>2</sup> at 10 V is obtained, which is the highest among the reported values.
BibTeX
@inproceedings{jiang2019all,
  author = {Yibin Jiang and Le Jiang and Fion Sze Yan Yeung and Ping Xu and Shuming Chen and Hoi Sing Kwok and Guijun Li},
  title = {{All-Inorganic Quantum-Dot Light-Emitting Diodes with Reduced Exciton Quenching by a MgO Decorated Inorganic Hole Transport Layer}},
  booktitle = {ACS},
  year = {2019},
  doi = {10.1021/acsami.9b01742},
}

Loading related content...

Figure