Accurate and Scalable Simulation of Cavity-Based Networks in Modular Quantum Architectures

Sahar Ben Rached, Zezhou Sun, Gui‐Lu Long, Santiago Rodrigo, Carmen G. Almudéver, Eduard Alarcón, Sergi Abadal

TL;DR

This paper introduces a hardware-aware simulation framework for modular quantum architectures, extending the popular NetSquid simulator to model cavity-mediated interconnects. By combining analytical Lindblad master equations with scalable discrete-event simulation, the authors demonstrate how the STIRAP protocol can significantly boost inter-chip state transfer fidelity, while identifying the critical trade-offs between speed, noise, and system scaling.

What Problem Does This Paper Address?

As we move toward large-scale quantum computing, "monolithic" chips (putting all qubits on one piece of hardware) become impractical due to wiring complexity and cooling limits. The solution is modular quantum computing, where smaller chips are linked via quantum interconnects.

However, these interconnects are a major bottleneck. Current experimental state transfers often suffer from high loss and decoherence. Furthermore, there is a "modeling gap": we have exact analytical tools for tiny systems (1-2 qubits) and high-level simulators for massive networks, but we lack a middle ground that can simulate multi-node modular architectures using realistic, hardware-specific noise models. This paper bridges that gap.

Methods

The researchers employed a two-pronged approach to validate their framework:

  1. Analytical Modeling: They used the Lindblad master equation (via Matlab/QuTiP) to model the density matrix evolution of a qubit-cavity system. They specifically focused on the Stimulated Raman Adiabatic Passage (STIRAP) protocol. Unlike direct coupling, STIRAP uses a "counter-intuitive" pulse sequence to transfer states through a "dark state," effectively bypassing the lossy cavity mode to achieve higher fidelity.
  2. NetSquid Extension: They extended NetSquid, a discrete-event simulator for quantum networks, by implementing custom physical noise models. They modeled cavities as amplitude damping channels and qubits with intrinsic $T_1$ (relaxation) and $T_2$ (dephasing) noise.
  3. Curve Fitting: To make the high-level simulation accurate, they used the analytical results to "tune" the NetSquid noise parameters (hyperparameter $\sigma$), ensuring the scalable simulator matched the underlying physics.

Datasets

The paper does not use external machine learning datasets. Instead, it uses:

  • Calibrated Hardware Parameters: Default values for qubit coherence ($T_1 \approx 292 \mu s, T_2 \approx 184 \mu s$) were taken from the IBM Strasbourg system (calibrated March 2025).
  • Experimental Benchmarks: The authors compared their "Cooperativity Factor" models against experimental data points from several landmark quantum optics and circuit QED papers (references [28]–[34] in the text).

Key Insights and Ideas

  • The Power of Cooperativity ($C$): The authors found that when using STIRAP, the fidelity depends primarily on the Cooperativity Factor ($C = g^2 / \kappa\gamma_0$), where $g$ is coupling, $\kappa$ is cavity decay, and $\gamma_0$ is qubit decay. Interestingly, STIRAP is sensitive to the product of these decay rates rather than their individual magnitudes, making it more robust than direct coupling.
  • Fidelity vs. Latency Trade-off: While STIRAP dramatically improves fidelity (e.g., a 45.7% increase in one tested regime), it comes at the cost of higher latency. The pulses must be slow enough to remain "adiabatic," creating a design tension for architects: do you want a fast, noisy network or a slow, clean one?
  • Non-Linear Fidelity Decay: In a 5-node chain, fidelity doesn't simply drop by a fixed percentage per hop. The first transmission often incurs the highest loss, and subsequent losses follow a non-monotonic pattern. This suggests that "simple" error models used in many network simulators may be over-optimistic or inaccurate for modular hardware.

Key Results

  • Fidelity Gains: STIRAP achieved fidelity improvements of 28.1% to 45.7% over constant-pulse methods in specific coupling regimes.
  • Scaling to 5 Nodes: The NetSquid simulation successfully tracked state degradation across a 5-node chain. In a strong coupling regime ($g = 10$ MHz), fidelity remained above 0.93 across all nodes.
  • Threshold for "High Fidelity": To reach the "gold standard" of 0.99 fidelity in a 2-node system, the authors identified a required threshold of $g/\kappa \approx 20$, assuming a $10\times$ improvement over current state-of-the-art $T_1/T_2$ times.
  • Latency Model: The total transmission latency was accurately modeled as $Latency = 1/g^\tau + l/v$, where $g$ (coupling strength) is the dominant factor, far outweighing the physical distance ($l$) between chips at the centimeter scale.

Limitations and Future Work

  • Single Mode Assumption: The current model assumes only one mode in the cavity is coupled to the qubits, which is valid only for short distances (under 100 meters).
  • Protocol Complexity: The study primarily focuses on state transfer. Future work is needed to simulate more complex multi-qubit gate sequences and simultaneous operations across the modular network.
  • Topology: The analysis was largely confined to a serial (linear) 5-node chain; exploring more complex topologies (like grids or fat-trees) would be the next logical step for the NetSquid framework.

Summary updated

Abstract

Cavity-mediated interconnects are a promising platform for scaling modular quantum computers by enabling high-fidelity inter-chip quantum state transmission and entanglement generation. In this work, we first model the dynamics of deterministic inter-chip quantum state transfer using the Stimulated Raman Adiabatic Passage (STIRAP) protocol, analyzing fidelity loss mechanisms under experimentally achievable qubit-cavity coupling and decoherence parameters. We then extend the NetSquid simulator, typically used for simulating long-range quantum communication networks, to support cavity-based communication channels for mediating inter-chip state transfer and entanglement generation. We model cavities as amplitude damping channels parameterized by physical system characteristics; cavity decay rate k and qubit-cavity coupling strength g, and analyze the impact of intrinsic qubit decoherence factors dictated by T1 and T2 times. Our simulations accurately represent the system's dynamics in both strong and weak coupling regimes, and identify critical trade-offs between fidelity, latency, and noise factors. The proposed framework supports faithful modeling and scalable simulation of modular architectures, and provides insights into design optimization for practical quantum network implementations.
BibTeX
@misc{rached2025accurate,
  author = {Sahar Ben Rached and Zezhou Sun and Gui‐Lu Long and Santiago Rodrigo and Carmen G. Almudéver and Eduard Alarcón and Sergi Abadal},
  title = {{Accurate and Scalable Simulation of Cavity-Based Networks in Modular Quantum Architectures}},
  year = {2025},
  eprint = {2508.13896},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2508.13896},
  howpublished = {arXiv},
}
Figure