A Thermoplastic Elastomer Belt Based Robotic Gripper

Xingwen Zheng, Ningzhe Hou, Pascal Johannes Daniel Dinjens, Ruifeng Wang, Chengyang Dong, Guangming Xie

TL;DR

This paper introduces a novel robotic gripper that uses a thermoplastic elastomer belt-based net for adaptive gripping. This design offers a simpler, motor-actuated alternative to complex pneumatic or hydraulic systems, demonstrating successful gripping of various objects and holding promise for delicate applications.

What Problem Does This Paper Address?

Traditional robotic grippers often rely on rigid mechanical fingers, which can be complex and may not be suitable for handling delicate or irregularly shaped objects. While "soft" robotic grippers have emerged, many still depend on intricate pneumatic or hydraulic actuation systems that can be bulky, energy-intensive, and expensive. This paper addresses the need for a simpler, more adaptable robotic gripper that can achieve compliant gripping without the complexities of fluidic actuation, making it more accessible for projects with limited size, budget, or power constraints.

Methods

The core innovation is a robotic gripper featuring an external frame and an internal, net-like structure made from a thermoplastic elastomer (TPE) belt. This TPE net is attached to the gripper's claws and central connection blocks. A single stepper motor, coupled with a ball screw mechanism, actuates the external frame. As the frame opens or closes, it causes the TPE net to stretch or contract, enabling it to conform to and grip objects through friction. The researchers employed SolidWorks for stress simulations to understand the relationship between the net's deformation and the normal stress applied to an object. For experimental validation, they integrated four piezoresistive sensors onto the TPE net to measure touch forces. These sensors' resistance changes were converted to voltage signals, which were then correlated with applied force through calibration experiments.

Datasets

Not discussed in the paper. The experiments involved gripping a variety of real-world objects.

Key Insights and Ideas

  • Simplicity through TPE Net: The use of a thermoplastic elastomer belt to form a net is a key design choice. It provides inherent flexibility and adaptability, allowing the gripper to conform to diverse object shapes without complex individual finger articulation.
  • Motor-Driven Elegance: By using a single stepper motor and a ball screw, the gripper achieves actuation without the need for bulky and complex pneumatic or hydraulic systems. This significantly reduces system complexity, cost, and power requirements.
  • Friction-Based Grasping: The gripper relies on friction between the TPE net and the object's surface for secure holding. This compliant contact mechanism is crucial for handling fragile items.
  • Stress-Deformation Correlation: The stress simulations revealed a direct relationship between the net's displacement and the normal stress it exerts, suggesting that larger gripping volumes require greater force.
  • Sensor Integration for Feedback: The integration of piezoresistive sensors directly onto the TPE net allows for real-time force measurement, paving the way for feedback-controlled gripping and preventing damage to objects.

Key Results

The gripper demonstrated the ability to successfully grip a variety of objects with different shapes, dimensions, and textures, including bottles, tape, roses, eggs, bananas, and staplers. The experiments showed that the gripper's output voltage (and thus measured force) varied depending on the object's properties and how it made contact with the sensors. For instance, lighter objects required less force, while irregularly shaped objects led to uneven contact and force distribution among the sensors. The force sensors were able to detect when the gripper made contact, held an object, and released it. The force measurement experiments indicated that the sensors could reliably measure forces up to approximately 5 N, though accuracy decreased beyond this point.

Limitations and Future Work

The authors acknowledge several limitations. Firstly, the gripper's conical net shape makes it difficult to grasp objects with a wider base than top. Secondly, the range of object dimensions that can be grasped is limited by the net's deformation capabilities and the need to maintain sufficient grasping force. The experiments were conducted in the air, and future work will investigate picking up objects from a surface. Isolating internal belt forces from external grasping forces is also a future research direction. The current force sensors have limited accuracy, particularly for forces above 5 N, which needs improvement. Future work also includes designing more sophisticated sensor arrangements, developing force feedback control for real-time adjustments, and exploring applications like nondestructive sampling of marine organisms.

Summary updated

Abstract

Novel robotic grippers have captured increasing interests recently because of their abilities to adapt to varieties of circumstances and their powerful functionalities. Differing from traditional gripper with mechanical components-made fingers, novel robotic grippers are typically made of novel structures and materials, using a novel manufacturing process. In this paper, a novel robotic gripper with external frame and internal thermoplastic elastomer belt-made net is proposed. The gripper grasps objects using the friction between the net and objects. It has the ability of adaptive gripping through flexible contact surface. Stress simulation has been used to explore the regularity between the normal stress on the net and the deformation of the net. Experiments are conducted on a variety of objects to measure the force needed to reliably grip and hold the object. Test results show that the gripper can successfully grip objects with varying shape, dimensions, and textures. It is promising that the gripper can be used for grasping fragile objects in the industry or out in the field, and also grasping the marine organisms without hurting them.
BibTeX
@inproceedings{zheng2020thermoplastic,
  author = {Xingwen Zheng and Ningzhe Hou and Pascal Johannes Daniel Dinjens and Ruifeng Wang and Chengyang Dong and Guangming Xie},
  title = {{A Thermoplastic Elastomer Belt Based Robotic Gripper}},
  booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems},
  year = {2020},
  url = {https://openreview.net/forum?id=qnBSYftQog0},
}
Figure