A Study on the Diagnosis of Lumbar Spinal Malposition in Chuna Manual Therapy Using X-Ray Images Based on Digital Markers

Min-Su Ju, Tae-Yong Park, Minho Choi, Ko YounSeok, Young Cheol Na, Yeong Ha Jeong, Jun-Su Jang, Jin-Hyun LeeDiagnostics 2025 · DOI

TL;DR

This study introduces a novel, quantitative approach to diagnosing spinal malpositions in Chuna manual therapy using X-ray images and digital markers. By establishing objective angular thresholds for flexion/extension, lateral bending, and rotation, the research aims to standardize this traditional diagnostic practice and improve its reliability.

What Problem Does This Paper Address?

Chuna Manual Therapy (CMT) is a traditional Korean medicine modality for treating musculoskeletal disorders. A critical aspect of CMT is the accurate diagnosis of spinal malpositions. Historically, this diagnosis has relied heavily on manual palpation, a method known for its low reliability and high subjectivity, heavily dependent on the practitioner's skill and experience. While X-ray imaging has been explored as a supplementary tool, a significant gap exists in establishing clear, quantitative diagnostic criteria for specific malposition types within CMT. This lack of objective standards hinders consistent clinical decision-making, standardization of training, and objective evaluation of treatment outcomes.

Methods

The researchers developed a quantitative diagnostic framework using digital markers on lumbar spine X-ray images. Five experienced Chuna manual medicine practitioners (KMDs) annotated anatomical landmarks on 2000 anonymized lumbar spine X-ray images (AP and lateral views) using a digital marker labeling program. These markers were used to calculate angles representing three types of spinal malpositions:

  • Flexion/Extension: Measured as the angular difference between the centerlines of the superior and inferior vertebral bodies on lateral X-rays.
  • Lateral Bending: Assessed using AP view images by comparing the centerlines of adjacent vertebral bodies.
  • Rotation: Calculated based on the angle between the vertebral centerline and the most medial points of the bilateral pedicles on AP view images.

To establish diagnostic criteria, the study determined optimal threshold angles for each malposition type that yielded the highest diagnostic accuracy, evaluated using weighted F1 (F1_W) scores.

Datasets

The study utilized a dataset of 2000 anonymized lumbar spine X-ray cases (anterior-posterior and lateral views) collected from the radiographic database of International St. Mary's Hospital, Catholic Kwandong University. This dataset was curated after applying specific inclusion and exclusion criteria, resulting in a final sample size calculated to be 1844 cases, with 2000 ultimately used for analysis.

Key Insights and Ideas

  • Quantifying the Subjective: The core innovation is translating the subjective assessment of spinal malposition in CMT into objective, quantifiable angular measurements derived from X-ray images.
  • Digital Markers as a Bridge: Digital markers serve as the crucial link, enabling precise and reproducible identification of anatomical landmarks for angle calculation, overcoming the limitations of manual palpation.
  • Establishing Objective Thresholds: The study moves beyond qualitative descriptions to propose specific angular thresholds for diagnosing malpositions, providing a concrete reference for practitioners.
  • Prevalence Patterns: Flexion malpositions were found to be significantly more common than extension malpositions, suggesting biomechanical or lifestyle factors at play. Left-sided lateral bending and rotation were also more prevalent.
  • Lumbar Gradient: The diagnostic thresholds for flexion/extension malposition tended to increase in the lower lumbar vertebrae, reflecting the natural anatomical curvature of the lumbar spine.

Key Results

The study demonstrated high diagnostic performance using weighted F1 (F1_W) scores:

  • Flexion/Extension: Average maximum F1_W score of 0.76 (global threshold) and 0.84 (local threshold).
  • Lateral Bending: Average maximum F1_W score of 0.85 (global threshold) and 0.87 (local threshold).
  • Rotation: Average maximum F1_W score of 0.71 (global threshold) and 0.72 (local threshold).

These scores indicate a meaningful level of diagnostic accuracy. The study successfully proposed optimal angular thresholds for each malposition type across different lumbar vertebral levels (L1-L5), which are presented in Table 3.

Limitations and Future Work

The authors acknowledge several limitations:

  • Inter-rater Reliability: The study design prevented direct assessment of inter-rater reliability as each rater analyzed different sets of radiographs. Future studies should use identical datasets to rigorously evaluate this.
  • Subjectivity in Landmark Generation: Despite standardized SOP training, variability in malposition diagnoses was observed, suggesting that even with digital markers, some inherent subjectivity in landmark identification might persist.
  • Lack of Clinical Correlation: The study did not investigate associations between malpositions and clinical factors (e.g., pain, intensity, symptoms), limiting direct clinical interpretation. Future research should explore these correlations.
  • Lumbar Spine Focus: The study was limited to the lumbar spine. Validation across other spinal regions where CMT is applied is necessary to establish generalizability.
  • Methodological Refinements: Further work is needed on standardizing digital marker placement and angle measurement validation.

Future work should focus on independent verification of inter-examiner agreement, exploring clinical correlations, and expanding the analysis to other spinal regions. The proposed quantitative thresholds require further validation in diverse clinical settings to assess their impact on treatment outcomes.

Summary updated

Abstract

<b>Background/Objectives:</b> This study aimed to evaluate digital markers and establish quantitative diagnostic criteria for spinal malpositions in Chuna manual therapy using lumbar X-rays. <b>Methods:</b> A total of 2000 X-ray images were collected from adult patients at the International St. Mary's Hospital of Catholic Kwandong University. Five Chuna manual medicine experts annotated anatomical landmarks using a digital marker labeling program and diagnosed three types of spinal malpositions: flexion/extension, lateral bending, and rotation. Diagnostic accuracy was evaluated using weighted F1 (F1_W) scores, and the optimal threshold values for each malposition type were determined based on maximum F1_W performance. <b>Results:</b> The results showed high diagnostic performance, with average maximum F1_W scores of 0.76 for flexion/extension, 0.85 for lateral bending, and 0.71 for rotation. Based on this analysis, threshold angles for each type of spinal malposition in Chuna manual diagnosis were determined. <b>Conclusions:</b> This study demonstrates the diagnostic validity of digital marker-based X-ray analysis in Chuna manual therapy and is the first to propose quantitative diagnostic thresholds for spinal malpositions. These findings may serve as a foundation for clinical application in spinal assessment and treatment planning, with further validation studies warranted.
BibTeX
@inproceedings{ju2025study,
  author = {Min-Su Ju and Tae-Yong Park and Minho Choi and Ko YounSeok and Young Cheol Na and Yeong Ha Jeong and Jun-Su Jang and Jin-Hyun Lee},
  title = {{A Study on the Diagnosis of Lumbar Spinal Malposition in Chuna Manual Therapy Using X-Ray Images Based on Digital Markers}},
  booktitle = {Diagnostics},
  year = {2025},
  doi = {10.3390/diagnostics15141748},
}
Figure