Abstract
This study investigates the photocatalytic degradation of the antibiotic lincomycin (LM) using a ternary composite of titanium dioxide (TiO₂), hydroxyapatite (HAP), and germanium (Ge) under UV-A irradiation. Initial comparisons established that the ternary TiO₂/HAP/Ge composite significantly outperformed binary and single-component catalysts. To maximize efficiency, a statistical mixture analysis was employed to determine the optimal ratio of the three components. The resulting model demonstrated high predictive accuracy ($R^2 > 98.9%$). Under optimized conditions, the system achieved 99.2% removal of LM and 49.3% mineralization (TOC removal), aligning closely with theoretical predictions.
Introduction
The accumulation of pharmaceutical compounds like lincomycin (LM) in aquatic environments poses a significant ecological threat, contributing to the development of antibiotic-resistant bacteria. Traditional wastewater treatment often fails to remove these recalcitrant pollutants. While TiO₂ is a widely used photocatalyst, its efficiency is limited by high electron-hole recombination rates. This research explores the synergy of adding HAP to enhance adsorption and Ge to extend light-absorption capabilities, creating a highly efficient ternary composite.
Comparative Performance of Catalyst Composites
Initial experiments compared the degradation potential of various catalyst combinations. The results indicated a clear hierarchy in removal efficiency: TiO₂/HAP/Ge > TiO₂/Ge > TiO₂/HAP. The inclusion of HAP acts as a trap for LM molecules, increasing their concentration on the catalyst surface, while Ge facilitates broader light utilization and the generation of reactive hydroxyl radicals.
Statistical Optimization via Mixture Analysis
Rather than relying on trial-and-error, the researchers used Mixture Analysis—a form of Response Surface Methodology (RSM)—to identify the ideal proportions of TiO₂ ($X_1$), HAP ($X_2$), and Ge ($X_3$). A 10-run experimental design was used to model two primary outcomes: LM removal ($Y_1$) and Total Organic Carbon (TOC) removal ($Y_2$).
Analysis of Variance (ANOVA) confirmed that the quadratic models were statistically significant ($p < 0.05$). The optimization focused on TOC removal to ensure not just the disappearance of the parent antibiotic, but the mineralization of organic intermediates into harmless substances.
Optimized Degradation and Mineralization
The statistical model identified an optimal coded composition of $X_1=0.6913$, $X_2=0.2313$, and $X_3=0.0756$. Validation experiments using this specific ratio confirmed the model's robustness.
As shown in the results, the system achieved near-total degradation of the antibiotic (99.2%) within 240 minutes. However, the TOC removal reached approximately 49.3%, indicating that while the antibiotic molecule is effectively broken down, roughly half of the organic carbon remains as intermediate byproducts. This distinction is critical for environmental applications, suggesting that further optimization or longer irradiation times may be necessary for full mineralization.
Conclusion
The study successfully demonstrates that a statistically optimized TiO₂/HAP/Ge composite is a highly effective tool for removing lincomycin from water. The use of mixture analysis provided a precise mathematical framework for catalyst design, achieving high experimental agreement with predicted models. Future work should focus on identifying the toxicity of remaining organic intermediates and testing the system's performance in complex, real-world wastewater matrices.
Summary updated