A Photothermally Enhanced Vancomycin-Coated Liquid Metal Antimicrobial Agent with Targeting Capability

Bo Wang, Sen Chen, Xuyang Sun, Xiaohui Shan, Xiyu Zhu, Bo Yuan, Hong‐Zhang Wang, Gang Zhou, Jing LiuBioengineering 2023 · DOI

TL;DR

Researchers have developed a novel antimicrobial agent by coating vancomycin onto liquid metal nanoparticles. This "LM@Van" system exhibits enhanced targeting of Staphylococcus aureus and, when exposed to near-infrared (NIR) light, leverages the liquid metal's photothermal properties to achieve nearly 100% bacterial killing, offering a promising strategy against antibiotic-resistant bacteria.

What Problem Does This Paper Address?

Antibiotic resistance is a growing global health crisis, with vancomycin (Van), a crucial antibiotic for treating Gram-positive bacterial infections like MRSA, facing diminishing efficacy due to resistance. While gallium-based liquid metals (LMs) show promise as antimicrobial agents with low resistance potential, they struggle with targeted delivery. This paper addresses the challenge of creating a highly effective, targeted antimicrobial agent that combines the strengths of both vancomycin and liquid metals, while also enhancing its efficacy through external stimuli.

Methods

The researchers synthesized a core-shell nanostructure where vancomycin (the "shell") was coated onto gallium-based liquid metal nanoparticles (the "core"). This coating was achieved using an ultrasound-assisted method, leveraging the native oxide layer on the liquid metal surface.

Key techniques employed include:

  • Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM): Used to visualize the morphology and confirm the core-shell structure of the LM@Van nanoparticles.
  • Dynamic Light Scattering (DLS) and Zeta Potential Measurements: To characterize particle size and surface charge, providing insights into the vancomycin coating and its interaction with bacteria.
  • UV-Visible and Infrared (IR) Spectroscopy: To confirm the presence and interaction of vancomycin on the liquid metal surface.
  • Photothermal Heating Experiments: Using an 808 nm NIR laser and an infrared camera to assess the temperature increase of the LM@Van solution under irradiation, demonstrating its photothermal conversion capabilities.
  • In Vitro Antibacterial Assays: Standard bacterial culture and plating methods were used to evaluate the antibacterial efficacy of LM, LM@Van, and their combination with NIR light.
  • Live/Dead Staining: Confocal microscopy was used to visualize bacterial viability (live vs. dead cells) after treatment.
  • Cytotoxicity Testing (CCK-8 assay): To assess the biocompatibility of the LM@Van nanoparticles with NIH 3T3 cells.

Datasets

Not discussed in the paper. The study relies on in-vitro experimental data generated from bacterial cultures and nanoparticle characterization.

Key Insights and Ideas

  • Synergistic Combination: The core insight is that combining vancomycin with liquid metal nanoparticles creates a synergistic effect, enhancing both targeting and killing efficacy.
  • Targeted Delivery via Vancomycin: Vancomycin's specific binding to bacterial cell walls acts as a "homing beacon," concentrating the liquid metal nanoparticles at the infection site. This overcomes the passive diffusion limitation of pure liquid metals.
  • Photothermal Enhancement: The liquid metal core acts as an efficient photothermal agent. Upon NIR laser irradiation, it heats up, significantly boosting the bactericidal activity of the vancomycin. This provides an external trigger for enhanced efficacy.
  • Improved Stability: Coating with vancomycin appears to stabilize the liquid metal nanoparticles, preventing deformation observed with bare LM under light.
  • Low Resistance Potential: The use of liquid metal, which is less prone to inducing resistance compared to traditional antibiotics, offers a long-term advantage.

Key Results

  • Successful Coating: Microscopic observations and zeta potential measurements confirmed that vancomycin was successfully coated onto the liquid metal nanoparticles, forming a core-shell structure. The particle size of LM@Van was significantly reduced (from ~500 nm to ~250 nm) compared to bare LM.
  • Targeted Interaction: Zeta potential shifts and SEM imaging demonstrated that LM@Van nanoparticles preferentially accumulated on the surface of S. aureus, indicating targeted binding.
  • Photothermal Efficacy: LM@Van solutions showed a significant temperature increase (up to 53.3 °C) upon 808 nm NIR laser irradiation, confirming excellent photothermal conversion.
  • Enhanced Antibacterial Activity:
    • Without NIR light, LM@Van showed improved antibacterial properties compared to pure LM.
  • With NIR light, LM@Van achieved nearly 100% bacterial killing of S. aureus, a significant improvement over LM alone or LM@Van without NIR.
  • Good Biocompatibility: Cytotoxicity tests showed that LM@Van maintained over 83% cell viability for NIH 3T3 cells, indicating good biocompatibility.

Limitations and Future Work

  • In Vitro Focus: The study was conducted entirely in vitro. Further in vivo studies are needed to validate the efficacy and safety in a biological system.
  • Specific Bacterium: The study focused on S. aureus. While the principle is likely applicable to other Gram-positive bacteria, testing against a broader range of pathogens is necessary.
  • Clinical Translation: The authors suggest that this work lays the groundwork for subsequent clinical applications, implying that further development and testing are required before clinical use.
  • Antibiotic Replacement: The authors propose that vancomycin could be replaced with other narrow-spectrum antibacterial agents, opening avenues for developing a wider range of LM-based antimicrobial agents with similar core-shell structures. This suggests future work could explore different antibiotic shells for targeted therapy.

Summary updated

Abstract

The targeted antimicrobial efficacy of Vancomycin decreases significantly over time due to bacterial resistance, whereas Ga-based liquid metals, which are less prone to inducing bacterial resistance, face challenges in achieving targeted antimicrobial effects. To tackle these issues, a highly efficient antimicrobial agent with targeting properties has been developed by combining Ga-based liquid metals and Vancomycin. Moreover, the performance of this antimicrobial agent can be greatly enhanced through the use of near-infrared light. Microscopic observations reveal that Vancomycin can be effectively encapsulated on the surface of liquid metal, facilitated by the presence of the oxide layer. The resulting core-shell structured antimicrobial agent demonstrates notable targeted antimicrobial effects against <i>S. aureus</i>. Antibacterial tests indicate that Vancomycin effectively improves the antibacterial properties of pure liquid metal. Additionally, this study unveils the excellent photothermal conversion capabilities of liquid metal, enabling the antimicrobial agent exposed to 808nm near-infrared light to exhibit significantly strengthened bactericidal performance. In this scenario, the antimicrobial agent can achieve nearly 100% effectiveness. This work enriches the investigation of integrating Ga-based antimicrobial agents with traditional antibiotics, showcasing promising antibacterial effects and establishing the groundwork for subsequent clinical applications.
BibTeX
@inproceedings{wang2023photothermally,
  author = {Bo Wang and Sen Chen and Xuyang Sun and Xiaohui Shan and Xiyu Zhu and Bo Yuan and Hong‐Zhang Wang and Gang Zhou and Jing Liu},
  title = {{A Photothermally Enhanced Vancomycin-Coated Liquid Metal Antimicrobial Agent with Targeting Capability}},
  booktitle = {Bioengineering},
  year = {2023},
  doi = {10.3390/bioengineering10070748},
}
Figure