Abstract
Aiming at efficient locomotion on the ground and safe stairs climbing for aged or physical disabled people, a wheel-track hybrid electric powered wheelchair (EPW) is designed, analyzed, and demonstrated extensively on various conditions. We first present the wheel-track hybrid design of the EPW with a focus on the mechanical structure and of onboard control system. We then discuss and analyze the wheel and the track mobile modes and their switching design of the EPW. The use of the track mobile mode is primarily for climbing up and down the stairs while the wheel mobile mode is for commonly ground surfaces. The mechanics analysis during these two mode switching and in the process of climbing up and down the stairs are also presented in the paper. The simulation and experimental results show that the new wheel-track hybrid EPW can effectively conduct the two locomotion modes including climbing up and down the stairs. The results also validate the motion mechanics calculation models and the dynamic mode switching between two mobile modes.
Introduction
For users of electric powered wheelchairs (EPWs), stairs represent one of the most significant architectural barriers to daily mobility. While various designs have attempted to solve this, they usually involve steep trade-offs: wheel-based designs are efficient on flat ground but struggle with stairs; leg-based designs are mechanically complex and energy-intensive; and track-based designs offer stability on stairs but are inefficient on flat surfaces. This research introduces a hybrid EPW that bridges this gap, combining the high-speed efficiency of wheels with the rugged stair-climbing capability of tracks.
Mechanical Design and Innovations
The proposed EPW integrates several key mechanical systems to ensure both mobility and safety across diverse terrains.
The design features three core mechanical innovations:
- Hybrid Locomotion & Switching: The chassis incorporates both a wheel module and a track module. A parallelogram linkage allows the wheels to be raised or lowered to switch between modes.
- Active Assistive Brackets: To prevent the wheelchair from tumbling forward or backward during transitions between the floor and the stairs, the team designed front and back assistive brackets. These provide extra support points during critical phases.
- Automatic Chair Leveling: Using a tilt sensor and a dedicated linear actuator, the system actively adjusts the seat angle in real-time. This ensures that even when the chassis is tilted at a 35° angle on a staircase, the passenger remains horizontal.
Locomotion Modes and Switching Mechanism
The transition between wheel-based cruising and track-based climbing is handled by a specialized switching mechanism that ensures stability during the changeover.
As shown in the schematic, a linear actuator ($S_1$) controls the height of the wheels relative to the tracks. When the wheels are lowered, they lift the tracks off the ground for efficient cruising. When raised, the tracks take over for climbing. The researchers used quasi-equilibrium modeling to predict the thrust required from the actuators during this process, which was later validated through experimental data.
Experimental Results
The prototype, a 50kg aluminum/steel EPW capable of carrying a 75kg load, was tested on a standard staircase with 160mm high steps. Key results include:
- Performance: The EPW achieved a maximum speed of 1.0 m/s on flat ground and 0.5 m/s on stairs.
- Stability: Tilt sensor data confirmed that the chair maintained a stable horizontal orientation throughout the climb, despite significant pitch changes in the chassis.
- Model Validation: Experimental results for driving motor torque and actuator thrust showed a high degree of correlation with the theoretical mechanics models, confirming the design's predictability.
Conclusion
The wheel-track hybrid EPW offers a promising solution for enhancing the mobility of elderly and disabled individuals. While the current prototype demonstrates successful stair climbing and mode switching, future work will focus on reducing weight through advanced materials, improving track durability, and enhancing ground clearance for outdoor use.
Summary updated