A Novel OMNeT++-based Simulation Tool for Vehicular Cloud Computing in ETSI MEC-compliant 5G Environments

Angelo Feraudo, Alessandro Calvio, Paolo Bellavista

Abstract

Vehicular cloud computing is gaining popularity thanks to the rapid advancements in next generation wireless communication networks. Similarly, Edge Computing, along with its standard proposals such as European Telecommunications Standards Institute (ETSI) Multi-access Edge Computing (MEC), will play a vital role in these scenarios, by enabling the execution of cloud-based services at the edge of the network. Together, these solutions have the potential to create real micro-datacenters at the network edge, favoring several benefits like minimal latency, real-time data processing, and data locality. However, the research community has not yet the opportunity to use integrated simulation frameworks for the easy testing of applications that exploit both the vehicular cloud paradigm and MEC-compliant 5G deployment environments. In this paper, we present our simulation tool as a platform for researchers and engineers to design, test, and enhance applications utilizing the concepts of vehicular and edge cloud. Our platform significantly extends OMNet++ and Simu5G, and implements our ETSI MEC-compliant architecture that leverages resources provided by far-edge nodes. In addition, the paper analyzes and reports performance results for our simulation platform, as well as provides a use case where our simulator is used to support the design, test, and validation of an algorithm to distribute MEC application components on vehicular cloud resources.

Introduction

As 5G and Internet of Things (IoT) applications proliferate, traditional "client-to-cloud" architectures are increasingly challenged by stringent latency requirements. Multi-access Edge Computing (MEC) addresses this by positioning computational resources at the network's edge. However, deploying dedicated edge infrastructure is costly. Vehicular Cloud Computing (VCC) offers a compelling alternative by leveraging the idle computing power of parked or moving vehicles to create transient micro-datacenters.

This paper introduces a specialized simulation tool that integrates VCC with the ETSI MEC standard in 5G environments. By extending the popular OMNeT++ and Simu5G frameworks, the authors provide a platform to test how vehicles can serve as "far-edge" nodes to reduce latency and backbone network stress. This tool fills a critical gap in the research community, enabling the design and validation of algorithms for distributing applications across dynamic vehicular resources.

The Proposed Simulation Framework

The core contribution of this work is an extended ETSI MEC reference architecture that incorporates vehicles as "far-edge" nodes. This architecture allows the system to treat vehicular resources as valid extensions of the MEC host level, effectively creating a multi-layered edge environment.

High-level ETSI MEC-compliant architecture with vehicular far-edge nodes.

To implement this, the authors developed several key technical components within the OMNeT++ environment:

  • The car Module: A specialized module extending the standard New Radio User Equipment (NRUE). It serves as a wrapper for 5G-enabled devices, providing virtualized computational resources such as CPU, RAM, and storage.
  • Management Entities: New applications such as ClientResApp for resource registration and reward management, and VIApp for local resource allocation, were integrated into the vehicular nodes.
  • Broker Integration: An external "Broker" entity was added at the MEC system level. This entity manages subscriptions to specific Areas of Interest (AoI), notifying the orchestrator when vehicular resources enter or exit a zone.
Detailed internal architecture of the simulation tool's host modules.

Validation and Datasets

The simulator's realism was validated using two real-world datasets to model mobility and demand patterns:

  1. Arnhem Dataset: Utilized open data from parking garages in Arnhem, Netherlands, to model vehicle entry rates and residency times (how long a car stays parked).
  2. Bologna WiFi Dataset: Leveraged data from Bologna, Italy, to simulate user activity levels and application request frequencies over a 24-hour cycle.

Key Insights: The Volatility Challenge

A primary challenge in vehicular clouds is the transient nature of resources. Unlike static edge servers, vehicles are highly mobile. A key insight from this research is the necessity of a predictive scheduler. By employing Gaussian distributions to estimate how long a vehicle will remain parked, the system can proactively manage application placement. This approach significantly reduces the need for costly service migrations—moving a running app from a car that is about to leave to another host—thereby increasing service reliability.

Results and Discussion

The simulation tool demonstrated high efficiency and scalability across several metrics:

  • Protocol Efficiency: The "join time" for integrating a new vehicle into the MEC system ranged from 13 to 40 ms, depending on the number of cars. The "release time" was consistently low at approximately 7 ms.
  • Scalability: Under a heavy load of 300 simultaneous application requests, the allocation delay introduced by the tool's management logic remained negligible at roughly 40 ms.
  • Scheduler Performance: In 24-hour simulations, the custom predictive scheduler significantly outperformed standard "Best First" and "Round Robin" algorithms. While the "Best First" approach triggered over 60 migrations during peak hours, the predictive scheduler maintained migrations at around 20.

Conclusion

This paper presents a robust simulation platform for testing ETSI MEC-compliant vehicular cloud applications. While current evaluations focused on parked vehicles, the architecture is designed to support broader mobility scenarios. Future work will explore the integration of Machine Learning for more sophisticated scheduling and investigate the energy consumption impacts on vehicles acting as edge hosts.

Summary updated

Abstract

Vehicular cloud computing is gaining popularity thanks to the rapid advancements in next generation wireless communication networks. Similarly, Edge Computing, along with its standard proposals such as European Telecommunications Standards Institute (ETSI) Multi-access Edge Computing (MEC), will play a vital role in these scenarios, by enabling the execution of cloud-based services at the edge of the network. Together, these solutions have the potential to create real micro-datacenters at the network edge, favoring several benefits like minimal latency, real-time data processing, and data locality. However, the research community has not yet the opportunity to use integrated simulation frameworks for the easy testing of applications that exploit both the vehicular cloud paradigm and MEC-compliant 5G deployment environments. In this paper, we present our simulation tool as a platform for researchers and engineers to design, test, and enhance applications utilizing the concepts of vehicular and edge cloud. Our platform significantly extends OMNet++ and Simu5G, and implements our ETSI MEC-compliant architecture that leverages resources provided by far-edge nodes. In addition, the paper analyzes and reports performance results for our simulation platform, as well as provides a use case where our simulator is used to support the design, test, and validation of an algorithm to distribute MEC application components on vehicular cloud resources.
BibTeX
@inproceedings{feraudo2023novel,
  author = {Angelo Feraudo and Alessandro Calvio and Paolo Bellavista},
  title = {{A Novel OMNeT++-based Simulation Tool for Vehicular Cloud Computing in ETSI MEC-compliant 5G Environments}},
  booktitle = {SIMULTECH},
  year = {2023},
  doi = {10.5220/0012140900003546},
}
Figure