A lattice Boltzmann study of particle settling in a fluctuating multicomponent fluid under confinement

Xue Xiao, Luca Biferale, Mauro Sbragaglia, Federico Toschi

TL;DR

Researchers have successfully coupled the Fluctuating Lattice Boltzmann Method (FLBM) with a finite-size particle model to simulate how a tiny sphere settles in a confined, two-liquid mixture. Their findings reveal that being in a tight channel doesn't just slow a particle down—it dramatically amplifies its velocity fluctuations, making them up to ten times more significant than in open water.

What Problem Does This Paper Address?

At the macroscopic scale, predicting how a particle falls through a liquid is straightforward: gravity pulls it down, and drag pushes back. However, as we zoom down to the micro- and nano-scales, the "smooth" background of the fluid starts to look like a chaotic sea of jiggling molecules. These thermal fluctuations cause particles to jitter (Brownian motion), and the deterministic Navier-Stokes equations used in traditional engineering are no longer enough.

The challenge is even greater when the particle is "confined"—moving through a narrow pore or channel. We know confinement increases drag, but how does it interact with thermal noise in a complex, multicomponent fluid? This paper bridges that gap by providing a robust numerical framework to study these "messy" mesoscale physics where boundaries and fluctuations collide.

Methods

The authors use a Fluctuating Lattice Boltzmann Method (FLBM). Unlike standard LBM, which is a popular mesoscale algorithm for fluid dynamics, FLBM adds stochastic (random) stress and diffusion terms to account for thermal noise.

Key technical components include:

  • Multicomponent Modeling: They used the Shan-Chen formulation to simulate a mixture of two fluids (Component A and Component B).
  • Finite-Size Particle Coupling: Instead of treating the particle as a single point, they modeled it as a "wetted" sphere with a physical volume. They used a bounce-back boundary condition at the particle-fluid interface to exchange momentum and a mass correction algorithm to ensure the fluid density remained consistent as the particle moved across the lattice.
  • Wettability Tuning: By adding a "virtual fluid layer" at the particle's surface, they could simulate different surface properties: hydrophilic (water-loving), neutral, or hydrophobic (water-fearing).
  • Integration: The particle's trajectory was solved using a leap-frog algorithm, ensuring stable and accurate motion over time.

Datasets

As a computational physics paper, the "datasets" consist of high-performance numerical simulations. The authors spent approximately 1.4 million computing hours to generate and validate their data.

  • Validation Benchmarks: The model was validated against established experimental data (Ref [53]) and previous numerical studies (Ref [37]) for particle settling in confined channels without noise.
  • Simulation Parameters: They varied the confinement ratio ($d/L$ from 0.13 to 0.67), thermal energy ($k_BT$), and driving force ($g$).

Key Insights and Ideas

  • Confinement as a Noise Amplifier: The most striking insight is that confinement significantly enhances the importance of velocity fluctuations. Because the narrow walls increase the effective friction ($\gamma_{conf}$), the relative impact of thermal kicks becomes much larger.
  • The Langevin Connection: Despite the complexity of the FLBM, the results perfectly matched a simplified hydrodynamical Langevin model. This confirms that the mesoscale simulation correctly recovers the expected "hydrodynamic limit" physics.
  • Wettability Independence: Surprisingly, while wettability changes how fluids interact with the particle surface, it had almost no effect on the statistical distribution of the velocity fluctuations in this specific settling regime.
  • Scaling Laws: The fluctuations ($\Delta U_{conf}^{(z)}$) followed predictable scaling laws: they are proportional to $(k_BT)^{1/2}$ and $(d/L)^{-3/2}$, independent of the driving force.

Key Results

  • Drag Validation: The ratio $c_m$ (settling velocity in confinement vs. unconfined) matched experimental curves, showing that the model accurately captures the "slow-down" effect of walls.
  • Fluctuation Magnitude: In highly confined domains, velocity fluctuations can be one order of magnitude larger than those predicted for unconfined domains.
  • Gaussian Distribution: The velocity fluctuations followed a near-perfect Gaussian distribution (Bell curve), validating the stochastic implementation in the FLBM.
  • Massive Scaling: The numerical results for fluctuations matched the theoretical pre-factor $\sqrt{6/(\pi \rho_p L^3)}$ with high precision, demonstrating the methodology's quantitative accuracy.

Limitations and Future Work

The authors note that their study assumes the fluid fields vary slowly enough for the "hydrodynamic assumption" of FLBM to hold. However, in extremely small or fast systems, these mesoscale assumptions might be challenged.

Future directions include: * Lubrication Effects: Studying the "squeeze" of fluid when a particle gets extremely close to a wall. * Interface Settling: Investigating how a particle behaves when it crosses the boundary between two immiscible liquids. * Brownian vs. Stokes Time: Exploring regimes where the time scale of the noise is longer than the time it takes for fluid momentum to diffuse, which could lead to new non-equilibrium phenomena.

Summary updated

Abstract

We present mesoscale numerical simulations based on the coupling of the fluctuating lattice Boltzmann method for multicomponent systems with a wetted finite-size particle model. This newly coupled methodologies are used to study the motion of a spherical particle driven by a constant body force in a confined channel with a fixed square cross section. The channel is filled with a mixture of two liquids under the effect of thermal fluctuations. After some validations steps in the absence of fluctuations, we study the fluctuations in the particle's velocity at changing thermal energy, applied force, particle size, and particle wettability. The importance of fluctuations with respect to the mean settling velocity is quantitatively assessed, especially in comparison with unconfined situations. Results show that the expected effects of confinement are very well captured by the numerical simulations, wherein the confinement strongly enhances the importance of velocity fluctuations, which can be one order of magnitude larger than what expected in unconfined domains. The observed findings underscore the versatility of the proposed methodology in highlighting the effects of confinement on the motion of particles in the presence of thermal fluctuations.
BibTeX
@article{xiao2021lattice,
  author = {Xue Xiao and Luca Biferale and Mauro Sbragaglia and Federico Toschi},
  title = {{A lattice Boltzmann study of particle settling in a fluctuating multicomponent fluid under confinement}},
  journal = {The European Physical Journal E},
  year = {2021},
  doi = {10.1140/epje/s10189-021-00144-4},
}
Figure