A Hybrid RF-VLC System for Energy Efficient Wireless Access

Abdallah Khreishah, Sihua Shao, Ammar Gharaibeh, Moussa Ayyash, Hany Elgala, Nirwan Ansari

TL;DR

This paper proposes a novel hybrid RF-VLC (Visible Light Communication) system to significantly reduce energy consumption in indoor wireless networks. By intelligently combining Wi-Fi and VLC, the system dynamically adapts to illumination needs and user demands, achieving substantial energy savings compared to using either technology alone.

What Problem Does This Paper Address?

The ever-increasing demand for wireless data, particularly indoors, is leading to a surge in energy consumption by wireless access networks (WACNs). Traditional Wi-Fi networks, while ubiquitous, are energy-intensive, especially when idle. Visible Light Communication (VLC) offers a promising alternative by leveraging LED lighting infrastructure to provide both illumination and data transmission, theoretically with near-zero power consumption for communication. However, VLC's effectiveness is highly dependent on ambient lighting conditions and illumination requirements. When illumination isn't needed, VLC can be less energy-efficient than RF. This paper addresses the challenge of creating an energy-efficient and adaptive indoor wireless access system that can seamlessly leverage both RF (Wi-Fi) and VLC technologies, optimizing power consumption under varying conditions.

Methods

The core of the paper is the proposal of a hybrid RF-VLC system and a corresponding optimization framework. The problem of minimizing total power consumption while satisfying user requests and illumination levels is formulated as a Mixed Integer Linear Program (MILP). Due to the NP-completeness of this problem, it's decomposed into two subproblems:

  1. Illumination Requirement Satisfaction: Determining which VLC access points (APs) need to be turned on to meet illumination demands.
  2. Communication Resource Allocation: Once illumination needs are met, allocating communication resources (assigning users to APs) to minimize power consumption for data transmission.

For the second subproblem, an online randomized algorithm is developed. This algorithm handles user connection requests sequentially without prior knowledge of future demands. It employs a doubling technique to guess the optimal fractional solution and then uses randomized rounding to obtain an integral solution. The algorithm is designed to achieve a competitive ratio, which measures its performance against an optimal offline solution.

Datasets

Not discussed in the paper. The paper relies on simulated data based on a realistic indoor environment model.

Key Insights and Ideas

  • Synergy of RF and VLC: The paper demonstrates that a hybrid approach is superior to individual RF or VLC systems. VLC excels when illumination is required, while RF can be more efficient when illumination is not a constraint or when ambient light is abundant.
  • Illumination as a Constraint: Incorporating illumination requirements as a primary constraint in the optimization problem is crucial for maximizing the benefits of VLC and ensuring user comfort.
  • Adaptive Power Management: The proposed online algorithm dynamically adjusts AP usage based on real-time user requests and illumination needs, avoiding unnecessary power consumption.
  • Competitive Ratio for Online Algorithms: The paper provides a theoretical analysis of the online algorithm's performance using the competitive ratio, showing it achieves a good balance between optimality and real-time decision-making.

Key Results

  • The proposed hybrid RF-VLC system can reduce power consumption by over 75% compared to individual WiFi or VLC systems.
  • The online algorithm achieves a competitive ratio of O(log(N) log(M)), where N is the number of users and M is the number of APs, against an oblivious adversary.
  • Simulation results show that the hybrid system's power consumption is significantly lower than WiFi alone, especially during periods when illumination is required.
  • The online algorithm's performance is shown to be within a factor of 2-4 of the optimal hybrid scheme, validating its effectiveness.

Limitations and Future Work

  • Offline vs. Online: While the paper proposes an online algorithm, the optimal solution is derived from an offline MILP formulation, which requires complete knowledge of all requests beforehand. The online algorithm's performance is compared to this offline optimum.
  • Illumination Not Needed Scenarios: The paper discusses three cases for when illumination is not needed. Case 1 (illumination not needed but turning on VLC APs is acceptable) is studied. Cases 2 (unexpected brightness) and 3 (no human-sensitive lighting) are noted for future work, suggesting further exploration of advanced VLC techniques for communication without noticeable illumination.
  • User Mobility: The current model assumes stationary users. Future work could investigate the impact of user mobility on the system's performance and the complexity of handover mechanisms.
  • Downlink Focus: The current formulation primarily focuses on downlink traffic. Extending the model to consider uplink traffic would provide a more comprehensive solution.
  • Advanced RF/VLC Integration: Further research could explore more sophisticated methods for integrating RF and VLC, such as dynamic spectrum sharing or joint beamforming.

Summary updated

BibTeX
@article{khreishah2018hybrid,
  author = {Abdallah Khreishah and Sihua Shao and Ammar Gharaibeh and Moussa Ayyash and Hany Elgala and Nirwan Ansari},
  title = {{A Hybrid RF-VLC System for Energy Efficient Wireless Access}},
  journal = {IEEE Trans. Green Commun. Netw.},
  year = {2018},
  doi = {10.1109/tgcn.2018.2849944},
}
Figure