A High-confidence Cyber-Physical Alarm System: Design and Implementation

Longhua Ma, Tengkai Yuan, Feng Xia, Ming Xu, Jun Yao, Meng Shao

Abstract Most traditional alarm systems cannot address security threats in a satisfactory manner. To alleviate this problem, we developed a high-confidence cyber-physical alarm system (CPAS), a new kind of alarm system. This system establishes a connection to the Internet (TCP/IP) through GPRS/CDMA/3G, achieving mutual communication control among terminal equipment, human-machine interfaces (HMIs), and users via existing mobile networks. The CPAS enables a transformation from traditional one-way alarms to two-way alarm modes. Successfully applied in practice, results show that CPAS avoids false alarms and satisfies residents' security needs.

1. Introduction

Traditional security systems typically operate in a Passive-Alarm (PA) mode, triggering signals only when specific conditions—such as a break-in—are met. These systems are inherently one-way, meaning users cannot query the status of the alarm or interact with it remotely. As urban environments scale toward the "Smart City" paradigm, managing thousands of sensors becomes a significant challenge. This paper addresses three primary hurdles: enabling stable Internet access for low-power embedded devices, handling massive concurrency at monitoring centers, and ensuring overall system reliability despite network congestion.

2. System Architecture

The proposed Cyber-Physical System (CPS) architecture bridges the physical world of sensors with the cyber world of the Internet. Unlike traditional models, CPAS integrates a feedback loop allowing for active control and monitoring.

High-level architecture of the Cyber-Physical Alarm System (CPAS).

The architecture comprises Terminal Equipment (TE) in the physical world, an Alarm Communication System for data transfer, and an HMI for human interaction. This structure facilitates a "two-way" paradigm where status queries and remote controls are as integral as the alarms themselves. This allows security personnel to actively check sensor health rather than waiting for a failure signal.

3. Design and Implementation

The system's hardware utilizes low-power microprocessors (MSP430 or ARM7) integrated with infrared (IR) probes, smoke sensors, and cameras. Connectivity is primarily established via GPRS (2.5G) due to its wide coverage and cost-effectiveness. TEs use AT commands to maintain TCP/IP connections via specialized modules.

To manage thousands of simultaneous connections at the monitoring center, a Time-Slice Rotation Scheduling Algorithm (TSRSA) was implemented. This ensures the CPU allocates specific time slices to each thread in a ready queue, preventing any single connection from monopolizing resources or causing system hangs. Furthermore, a "heartbeat" logic ensures self-healing connectivity; if a TE fails to send data three consecutive times, it automatically re-establishes the GPRS link to maintain near 100% uptime.

4. Field Deployment and Results

The CPAS was deployed in a real-world rollout in Dongyang City, China, managing over 2,000 intelligent TEs. Experimental testing verified the networked interface and response times across various user nodes.

The HMI software interface managing multiple terminal equipments.

Key results from the deployment include:

  • Scalability: The HMI successfully supports over 2,000 active devices from various users simultaneously.
  • Low Latency: The end-to-end process—from detection to the HMI sounding an alarm and notifying a guard—takes approximately 2 seconds.
  • Stability: The system has operated reliably and stably for over six months in the field.
  • False Alarm Reduction: Real-time visual verification allows guards to confirm threats via site images before responding, significantly reducing the impact of false triggers.

5. Conclusion and Future Work

The CPAS represents a significant shift toward proactive, interconnected security. By moving from "alert-only" to "query-and-control," the system provides a more robust security framework for modern residential needs. While successful, future work will focus on optimizing video compression to reduce data costs and transitioning to 3G/4G networks for higher resolution. Additionally, enhancing cybersecurity protocols against malicious attacks remains a priority for future iterations of the system.

Summary updated

Abstract

Most traditional alarm systems cannot address security threats in a satisfactory manner. To alleviate this problem, we developed a high-confidence cyber-physical alarm system (CPAS), a new kind of alarm systems. This system establishes the connection of the Internet (i.e. TCP/IP) through GPRS/CDMA/3G. It achieves mutual communication control among terminal equipments, human machine interfaces and users by using the existing mobile communication network. The CPAS will enable the transformation in alarm mode from traditional one-way alarm to two-way alarm. The system has been successfully applied in practice. The results show that the CPAS could avoid false alarms and satisfy residents' security needs.
BibTeX
@inproceedings{ma2010high,
  author = {Longhua Ma and Tengkai Yuan and Feng Xia and Ming Xu and Jun Yao and Meng Shao},
  title = {{A High-confidence Cyber-Physical Alarm System: Design and Implementation}},
  booktitle = {GreenCom/CPSCom},
  year = {2010},
  url = {https://openreview.net/forum?id=eqJTRuISuB},
}
Figure