A Hierarchical Evaluation Index System for FMS Reliability Considering Coupling Relations Between System Elements

Yanhu Pei, Congbin Yang, Jingjing Xu, Yida Wang, Xiangmin Dong

Abstract

FMS reliability cannot be accurately evaluated without considering coupling relations between system elements. This paper presented a hierarchical and quantitative evaluation index system for FMS based on Petri net models and judgment matrix construction. In the proposed system, influencing factors and their coupling relations related to system elements including human, control systems and mechanical equipment, are analyzed. Based on the above analysis, FMS is described as a hierarchical system composed of the whole-level system, processing system and transfer system. Petri net for the running process of each system is modelled for reliability simulation analysis. And judgement matrices of indexes are constructed and combined with simulation of Petri net models to determine weighted values for influencing factors. Finally, an application example is completed to verify the effectiveness of the proposed system. Results indicate that the system can help to quantitatively evaluate the reliability of FMS based on availability indexes of elements, and clearly show weaknesses of the system from element level, which is a significant basis for the FMS reliability improvement during the design stage.

Introduction: The Challenge of Coupling Relations

In modern manufacturing, a Flexible Manufacturing System (FMS) is a complex "system of systems" involving mechanical equipment, automated transfer vehicles (UGVs), hierarchical control software, and human operators. Traditionally, reliability engineers focused on the failure rates of single components in isolation (e.g., the MTBF of a specific robot).

Failure propagation and coupling relations within an FMS, showing how wrong commands and measurement data can impact overall system usability.

However, this approach misses critical coupling relations. As illustrated in the failure propagation model above, a sensor glitch in a machine tool might send "wrong measurement data" to the upper control system, which then issues "wrong commands" that halt the entire production line. Conversely, a well-designed buffer system might allow the line to continue operating even if one machine fails. The challenge lies in creating a mathematical framework that accounts for these interdependencies to accurately predict overall system availability during the design phase.

A Hierarchical Evaluation Framework

To address these complexities, the authors propose a three-level hierarchical index system. This structure allows for a granular analysis of how individual component failures ripple upward to affect the entire system.

The hierarchical architecture of the FMS, distinguishing between upper control systems, processing equipment, and transfer/storage systems.

The hierarchy is organized as follows:

  1. Level 1 (System): Overall FMS availability.
  2. Level 2 (Subsystems): Human operators, upper control systems, processing systems, and transfer systems.
  3. Level 3 (Elements): Individual components like robots, machine tools, and bottom-level controllers.

Methodology: Petri Nets and AHP

The framework integrates two primary engineering tools to quantify reliability:

  • Stochastic Petri Nets (PN): These are used to model the discrete flow of parts and information. The authors developed specific PN models for parallel processes, synchronous operations, and equipment with buffer storage. By simulating these nets, they can observe how "tokens" (representing workpieces) are delayed or blocked when specific elements fail.
  • Analytic Hierarchy Process (AHP): Judgment matrices are used to assign "weights" to different components, determining whether an element has a "major," "general," or "minor" influence on the total system.
  • Coupling Error Probability (CEP): A novel metric introduced to represent the probability that a failure in one element causes a failure in another.

Case Study and Results

The model was validated using a simulated application of a box-type component machining FMS. The simulation utilized specific Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR) data for 10 distinct elements, processed via SPNP6.0 software.

Key findings included:

  • Overall System Availability: Calculated at 0.8516.
  • Critical Bottlenecks: Machine Tools (weighted at 0.4) and UGVs (weighted at 0.3264) were identified as the most significant influences on system reliability in this specific setup.
  • The Human/Software Factor: Unlike mechanical-only models, this framework treats human error and control system stability as integral elements with their own availability scores.

Conclusion

This hierarchical approach allows engineers to move beyond simple component-level failure rates. By identifying specific weights and coupling effects, the system pinpoints exactly where to invest in higher-quality hardware or redundancy to maximize total uptime. Future work will focus on integrating this evaluation system directly into the initial design and layout optimization phase of FMS development to "build in" reliability from day one.

Summary updated

Abstract

<title>Abstract</title> FMS reliability cannot be accurately evaluated without considering coupling relations between system elements. This paper presented a hierarchical and quantitative evaluation index system for FMS based on Petri net models and judgment matrix construction. In the proposed system, influencing factors and their coupling relations related to system elements including human, control systems and mechanical equipment, are analyzed. Based on the above analysis, FMS is described as a hierarchical system composed of the whole-level system, processing system and transfer system. Petri net for the running process of each system is modelled for reliability simulation analysis. And judgement matrices of indexes are constructed and combined with simulation of Petri net models to determine weighted values for influencing factors. Finally, an application example is completed to verify the effectiveness of the proposed system. Results indicate that the system can help to quantitatively evaluate the reliability of FMS based on availability indexes of elements, and clearly show weaknesses of the system from element level, which is a significant basis for the FMS reliability improvement during the design stage.
BibTeX
@article{pei2021hierarchical,
  author = {Yanhu Pei and Congbin Yang and Jingjing Xu and Yida Wang and Xiangmin Dong},
  title = {{A Hierarchical Evaluation Index System for FMS Reliability Considering Coupling Relations Between System Elements}},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2021},
  doi = {10.1007/s00170-021-07648-5},
}
Figure