A Flexible, Magnet-Based Miniaturized Low-Frequency Mechanical Antenna Enabling Cross-medium Communication and Collaboration among Unmanned Systems

Xining Zang, Qingang Li, Zhi Cui, Xin Ma, Weisheng Yue, Ieng Hou U, Kangjie Zhou, Juntian Qu, Jianglei Chang, Yuping Huang, Chang Liu, Shuxiang Dong, Qinglei Hu, Yong CuiResearch Square 2025 · DOI

Abstract

Extremely low frequency (ELF, 3–30 Hz) signals possess strong cross-medium communication capabilities, making them particularly well-suited for underground and underwater environments. However, traditional low-frequency (LF) transmission systems are large and inefficient, posing significant limitations in practical applications. In recent studies, mechanical antennas have been explored to generate LF signals, but current approaches rely on bulky equipment with limited range, making them unsuitable for personal use or integration into small unmanned devices. To address this challenge, this study introduces a flexible, magnet-based miniaturized LF mechanical antenna, fabricated using 3D printing. The antenna consists of a macro-fiber composite layer and a flexible permanent magnet film, and features an extremely compact volume (<6.8 cm³) and low weight (<50 g). It is also highly flexible, allowing for easy integration into diverse applications. Its transmitted signal can reach 60 m before the magnetic field strength attenuates to 1 pT. Mounted on a unmanned aerial vehicle (UAV), the antenna facilitates reliable communication between quadruped robots operating outside caves and aerial robots located deep within cave interiors, where high-frequency (HF) signals cannot penetrate. This study is the first to demonstrate robust LF cross-medium communication between UAV and ground robots in cave environments, paving the way for unmanned collaboration in scenarios inaccessible to HF wireless signals.

Introduction

High-frequency (HF) electromagnetic waves, such as those used for Wi-Fi and GPS, are highly effective for high-speed data transmission but suffer from severe attenuation in conductive or dense media. In environments like deep caves, underground facilities, or underwater, these signals often dissipate within meters. To overcome these barriers, Extremely Low Frequency (ELF, 3–30 Hz) signals are required. However, traditional ELF antennas are prohibitively large due to wavelength requirements.

Mechanical Antennas (MAs) offer a compact alternative by physically oscillating magnets to generate fields. Despite their promise, current MA designs are often too bulky or power-intensive for integration into small unmanned systems. This paper presents a novel, flexible, and miniaturized LF mechanical antenna (FMLMA) designed specifically for cross-medium communication in challenging environments.

Overview of cross-medium communication scenarios enabled by the FMLMA.

Methods

The FMLMA is fabricated using a multi-step process involving material innovation and 3D printing. A custom magnetic ink was developed by mixing Neodymium-Iron-Boron (NdFeB) powder with a flexible silicone matrix (Ecoflex). This ink is 3D-printed onto a Macro-Fiber Composite (MFC) actuator using a five-axis dispenser, allowing the antenna to conform to various surfaces.

Post-curing, the film is magnetized using a 3.0 Tesla pulsed field to align its magnetic domains. The MFC actuator utilizes the piezoelectric effect to vibrate the magnetic film at its resonant frequency (typically 1–10 Hz), generating a low-frequency magnetic field. Data transmission is achieved through Amplitude-Shift Keying (ASK), and signals are processed using Fourier transform-based filtering and Pearson correlation algorithms to enhance reliability in noisy environments.

Fabrication process and material characterization of the FMLMA.

Results

Characterization of the magnetic film revealed that an 80 wt% NdFeB composition provides the optimal balance between magnetic strength and structural flexibility. Higher concentrations increased stiffness, which paradoxically reduced vibration amplitude and signal range. Field tests demonstrated that the LF signal is remarkably resilient, losing only 1.5% of its strength when passing through solid rock compared to air.

The final device is exceptionally compact, weighing less than 50 grams and occupying a volume under 6.8 cm³. It achieves a communication range of up to 60 meters. In a practical demonstration, a UAV operating inside a cave successfully transmitted target coordinates through the cave walls to a quadruped robot outside, enabling autonomous collaborative navigation in a GPS-denied environment.

Discussion and Conclusion

The FMLMA represents a significant step forward in enabling communication for small-scale unmanned systems in extreme environments. While the current data rate of 4 bits per second is low, it is sufficient for transmitting critical telemetry and commands. The system's flexibility and low weight make it ideal for deployment on drones and mobile robots. Future research will focus on increasing the bandwidth, extending the range through larger antenna arrays, and improving receiver sensitivity to environmental noise. This technology paves the way for advanced search-and-rescue and exploration missions in previously inaccessible subterranean and underwater locations.

Summary updated

Abstract

<title>Abstract</title> Extremely low frequency (ELF, 3–30 Hz) signals possess strong cross-medium communication capabilities, making them particularly well-suited for underground and underwater environments. However, traditional low-frequency (LF) transmission systems are large and inefficient, posing significant limitations in practical applications. In recent studies, mechanical antennas have been explored to generate LF signals, but current approaches rely on bulky equipment with limited range, making them unsuitable for personal use or integration into small unmanned devices. To address this challenge, this study introduces a flexible, magnet-based miniaturized LF mechanical antenna, fabricated using 3D printing. The antenna consists of a macro-fiber composite layer and a flexible permanent magnet film, and features an extremely compact volume (&lt;6.8 cm³) and low weight (&lt;50 g). It is also highly flexible, allowing for easy integration into diverse applications. Its transmitted signal can reach 60 m before the magnetic field strength attenuates to 1 pT. Mounted on a unmanned aerial vehicle (UAV), the antenna facilitates reliable communication between quadruped robots operating outside caves and aerial robots located deep within cave interiors, where high-frequency (HF) signals cannot penetrate. To the best of our knowledge, this study is the first to demonstrate robust LF cross-medium communication between UAV and ground robots in cave environments, paving the way for unmanned collaboration in scenarios inaccessible to HF wireless signals.
BibTeX
@inproceedings{zang2025flexible,
  author = {Xining Zang and Qingang Li and Zhi Cui and Xin Ma and Weisheng Yue and Ieng Hou U and Kangjie Zhou and Juntian Qu and Jianglei Chang and Yuping Huang and Chang Liu and Shuxiang Dong and Qinglei Hu and Yong Cui},
  title = {{A Flexible, Magnet-Based Miniaturized Low-Frequency Mechanical Antenna Enabling Cross-medium Communication and Collaboration among Unmanned Systems}},
  booktitle = {Research Square},
  year = {2025},
  doi = {10.21203/rs.3.rs-6617078/v1},
}
Figure