Abstract: Contact-rich manipulation tasks, such as wiping or assembly, require precise tuning of a robot's impedance parameters to balance task accuracy with safety. Traditionally, this tuning relies on expensive real-world trials or inaccurate simulations. We introduce the Diffusion Contact Model (DCM), which utilizes the iterative denoising process of diffusion models to simulate complex contact dynamics. By treating denoising as a functional proxy for physics-based solvers, DCM enables "robot-free" optimization of stiffness profiles. Our results demonstrate that DCM reduces the need for physical trials by 75% while outperforming standard recurrent neural network baselines in force prediction and optimization quality.
Introduction
In robotics, tasks involving significant physical contact—like wiping a curved surface or scrubbing—are notoriously difficult to automate. These tasks typically employ impedance control, where the robot's "stiffness" (impedance) is modulated to follow a demonstrated path (task objective) while remaining compliant enough to handle unexpected contact safely (compliance objective).
Finding the optimal stiffness profile usually requires Bayesian optimization performed directly on a real robot. This process is slow, hardware-intensive, and often impractical for complex environments. While physics simulators like MuJoCo exist, the "sim-to-real gap"—caused by the difficulty of modeling real-world friction and elasticity—limits their utility. Furthermore, standard feed-forward neural networks struggle to capture the highly nonlinear, iterative nature of contact dynamics.
The Diffusion Contact Model (DCM)
To address these challenges, we propose the Diffusion Contact Model (DCM). The core innovation lies in using a denoising diffusion process to predict contact forces.
Iterative Denoising as Simulation
The multi-step denoising process in diffusion models provides an "inductive bias" that mathematically resembles the iterative solvers used in physics engines (e.g., solving Nonlinear Complementarity Problems). Instead of predicting contact forces in a single pass, DCM iteratively refines a noise-filled vector into a predicted contact force trajectory $\mathcal{F}^{(0)}$. This allows the model to better capture the underlying physics of contact than traditional black-box models.
Architecture and Robot-Free Optimization
The model utilizes a Retentive Network (RetNet) backbone for its score function. RetNet offers Transformer-like performance for time-series data but with significantly lower computational overhead. The system takes a demonstrated trajectory, a reference trajectory, and a proposed stiffness profile $\mathcal{K}$ as inputs to predict the resulting forces.
Once trained, DCM serves as a "virtual robot." This enables thousands of simulated trials to find the optimal stiffness profile without moving a physical motor, drastically accelerating the optimization pipeline.
Experimental Evaluation
We evaluated DCM in both simulated (MuJoCo/RoboSuite) and real-world (Franka Emika Panda) environments. In the real-world setup, we collected a small dataset of 80 training trajectories and fine-tuned the model from simulation data to overcome data scarcity.
Key Results
- Prediction Accuracy: DCM significantly outperformed baseline RNNs in predicting contact forces. In real-world settings, DCM achieved a correlation of $R \simeq 0.5$ between predicted and actual task objectives, whereas the baseline correlation was near zero.
- Optimization Efficiency: By shifting the trial-and-error phase to the DCM, we reduced the total optimization time for a real-world task from 80 minutes to just 25 minutes—a 3x speedup.
- Optimization Quality: In simulation, the "Hyper-volume Indicator" (a metric for multi-objective optimization) for DCM was comparable to performing 50 actual robot trials. In physical experiments, DCM matched the performance of traditional robot-based optimization while requiring 75% fewer physical trials.
Discussion and Future Work
DCM demonstrates that the iterative nature of diffusion is a powerful tool for modeling physical interactions. It is particularly robust to small datasets, maintaining high accuracy where standard models fail.
However, DCM remains a "black-box" model. Future research will focus on "gray-box" approaches that incorporate explicit analytical physics constraints to improve interpretability. Additionally, we aim to develop a "foundation model" for contact by training on massive, diverse manipulation datasets, potentially allowing robots to master new physical skills with minimal fine-tuning.
Summary updated