Abstract
The interaction between waves and obstacles in water is a common problem in ocean engineering. This article introduces a new numerical method, the Boundary Collocation Method (BCM) based on the Eigenfunction Expansion Method (EEM), to solve two-dimensional wave problems involving submerged wedge obstacles. Unlike traditional methods often confined to rectangular geometries, this approach analyzes the change in wave velocity potential for irregular shapes.
Introduction: The Challenge of Wave-Obstacle Interaction
In ocean engineering, understanding how waves propagate around obstacles—such as wave power devices or coastal barriers—is critical. However, modeling this is notoriously difficult because the wave’s potential function often encounters a "singularity" near the obstacle, causing theoretical amplitudes to trend toward infinity.
Existing solutions generally fall into two categories:
- Analytic Methods: Highly accurate but limited to very simple geometries like flat rectangles.
- Numerical Methods (e.g., Boundary Element Method): Capable of handling complex shapes but often computationally intensive, difficult to program, and burdened by complex boundary discretization.
This paper bridges this gap by providing a method that handles irregular geometries, specifically submersed wedges, without the heavy computational burden of standard boundary element methods.
Methodology: Hybrid BCM-EEM Approach
The researchers propose a hybrid model that leverages the strengths of two mathematical frameworks: the Eigenfunction Expansion Method (EEM) and the Boundary Collocation Method (BCM).
The EEM provides the structural solution by dividing the water into two regions (upstream and downstream of the obstacle). The wave potential is expressed as a series of eigenfunctions that satisfy seabed and free-surface conditions. The BCM then acts as the "glue" to handle the obstacle's boundary. Instead of integrating over the entire surface, BCM selects a finite number of specific "collocation points" on the boundary.
The unknown coefficients of the EEM series are solved by ensuring the boundary conditions are met exactly at these specific points. This approach avoids complex boundary discretization and integration, focusing instead on point-wise satisfaction of conditions.
Analysis and Results
The model was validated using simulated parameters: a water depth ($h$) of 10 meters, a wave frequency ($\omega$) of 1.25 rad/s, and obstacle drafts ($d$) of 2 and 3 meters.
Wave Amplitude Reduction
A key insight from the model is the clear demonstration of amplitude reduction. As waves pass over the submerged wedge, their amplitude is reduced due to reflected waves. Predictably, a larger draft ($d=3$) leads to a more significant reduction in wave energy on the downstream side compared to a smaller draft ($d=2$).
Accuracy and Precision
The success of the model was measured through absolute and relative error analysis:
- High Accuracy: For a 2-meter draft, the maximum absolute error was $\leq 0.025$ in the incoming region and $\leq 0.03$ in the outgoing region.
- Improved Precision with Depth: When the draft increased to 3 meters, the error decreased, with maximum absolute errors of $\leq 0.017$ and $\leq 0.022$, respectively.
- Relative Error: The relative error remained impressively low, staying under 2.5% for $d=2$ and under 1.7% for $d=3$.
Conclusion
The primary advantage of the BCM-EEM hybrid is its simplicity compared to the Boundary Element Method (BEM), making it significantly easier to program while maintaining high accuracy. While the strategic placement of collocation points remains a challenge for stability, this method provides a feasible basis for solving complicated 2D wave problems and could be extended to more complex, non-wedge obstacles in the future.
Summary updated