Indoor and Outdoor Localization for UAVs

Y. J. Xiao, Guanchong Niu, Chung Shue Chen, Mao Liang, Peipei ZhuIntechOpen 2024 · DOI · OpenAlex

Unmanned Aerial Vehicles (UAVs) are increasingly deployed in complex environments, yet their reliance on Global Positioning System (GPS) remains a significant vulnerability. In "urban canyons" or indoor spaces, GPS signals are often blocked or reflected, leading to critical navigation failures. This research explores advanced localization techniques designed to maintain high-precision positioning when GPS is unavailable, introducing functional prototypes based on Visible Light Communication (VLC) and vision-based multi-scale QR codes.

Overview of UAV localization strategies including GPS, VLC, and vision-based methods.

Addressing the "GPS-Denied" Challenge

While outdoor navigation typically relies on GPS, indoor environments and dense urban areas require alternative solutions. Current technologies like LiDAR and Ultra-Wideband (UWB) offer high accuracy but are often hindered by weight, cost, or signal interference. Standard vision-based Simultaneous Localization and Mapping (SLAM) can also struggle in low-light or repetitive environments. The authors propose a low-cost, robust framework that enables UAVs to transition seamlessly between these challenging scenarios, with a specific focus on indoor navigation and high-precision autonomous landing.

Proposed Methodologies

The research introduces two primary localization prototypes:

1. VLC-IMU Fusion for Indoor Navigation

This system leverages existing LED lighting infrastructure for positioning. A photodiode (PD) on the UAV measures light intensity, which is then compared against a pre-constructed "fingerprint" database. To manage signal instability, the system employs Dynamic Time Warping (DTW) to match perceived light sequences.

To ensure smooth real-time positioning, the system uses a Kalman Filter (KF) to fuse spatially accurate but low-frequency VLC data with high-frequency but drift-prone data from an Inertial Measurement Unit (IMU). Furthermore, a modularization approach is used to simplify database construction; by exploiting the symmetry of LED layouts, researchers can map a single quadrant and extrapolate the data to the entire floor.

Workflow of the proposed positioning and navigation system, highlighting the fusion of VLC and IMU data.

2. Multi-Scale QR Vision for Autonomous Landing

For the high-precision task of landing on moving platforms, the authors developed an empirical distance estimation method using multi-scale QR codes. By utilizing three different sizes of QR codes (Small: 0.042m, Middle: 0.113m, Large: 0.362m), the UAV can maintain a visual lock across a wide range of altitudes—from nearly 17 meters down to the final centimeters of descent.

Key Insights and Experimental Results

  • Symmetry as a Shortcut: The use of symmetric LED modules drastically reduces the labor required for indoor mapping.
  • The "Goldilocks" QR Strategy: Nesting multi-scale codes creates a "zoom" effect, allowing the software to estimate distance accurately across varying heights.
  • Complementary Sensor Fusion: The IMU provides flight stability, while VLC and QR codes provide the absolute "ground truth" needed to correct IMU drift.

Experimental trials demonstrated the effectiveness of these systems. The VLC prototype successfully integrated low-cost components for indoor positioning. The vision system's empirical fitting function achieved an R-squared value of up to 0.9971, indicating near-perfect altitude estimation. Most notably, the autonomous landing system achieved a success rate higher than 85% on a ground vehicle moving at 2 m/s, with detection ranges extending up to 17.2 meters.

Limitations and Future Outlook

Despite these successes, challenges remain. The vision system is sensitive to extreme lighting conditions, such as peak sunlight, which can cause reflections on QR codes. Additionally, while modularization helps, maintaining VLC fingerprint databases in dynamic environments with moving partitions is a hurdle. Future work will focus on integrating Artificial Intelligence to improve real-time error compensation and feature detection under diverse lighting conditions, further expanding the operational capabilities of UAVs in complex industries.

Source: Indoor and Outdoor Localization for UAVs, published in Innovations in Indoor Positioning Systems (IPS), 2024.

Summary updated

Abstract

This chapter investigates advanced localization techniques for unmanned aerial vehicles (UAVs), focusing on the challenges and solutions associated with both indoor and outdoor environments. By examining a range of positioning strategies, including the global positioning system (GPS), visible light communication (VLC), and vision-based methods, this chapter presents a comprehensive overview of the current state and future potential of UAV localization. The integration of various sensors and the strategic use of landmarks as reference points are explored to enhance localization accuracy. Moreover, two pioneering prototypes that are designed to mitigate the limitations identified in current technologies are introduced for case study. A modularization approach for VLC systems and an empirical method for vision-based distance estimation employing multi-scale QR codes. This chapter also highlights the role of sensor fusion and artificial intelligence in improving the precision and efficiency of UAV navigation. Through proof-of-concept experiments utilizing photodiodes (PDs), inertial measurement units (IMUs), and cameras, we demonstrate the practical applicability and effectiveness of the discussed methodologies. Finally, we study the practical applicability and effectiveness of the discussed systems and their experimental results. Our investigations illustrate significant superiority in UAV localization technologies, paving the way for expanded applications across diverse industries and complex operational scenarios.
BibTeX
@inproceedings{xiao2024indoor,
  author = {Y. J. Xiao and Guanchong Niu and Chung Shue Chen and Mao Liang and Peipei Zhu},
  title = {{Indoor and Outdoor Localization for UAVs}},
  booktitle = {IntechOpen},
  year = {2024},
  doi = {10.5772/intechopen.1005355},
}
Figure