Elastic Properties of Disordered Media

Anders Malthe‐Sørenssen, Anders Malthe-SorenssenLecture Notes in Physics 2024 · DOI · OpenAlex

Abstract There are various physical properties that we may be interested in for a disordered material. In the previous chapter, we studied flow problems in disordered materials using the percolation system as a model disordered material. In this chapter we will address mechanical properties of the disordered material.

Introduction

As materials become increasingly porous or disordered, their mechanical integrity undergoes a dramatic transition. This paper explores the physics behind the disappearance of mechanical stiffness in such systems. By applying percolation theory to elastic lattices, we demonstrate that the macroscopic Young’s modulus follows a universal power-law scaling near a critical "rigidity threshold." Unlike simple connectivity problems, the stability of these systems is dictated by bending forces rather than simple stretching, particularly as the density of internal connections approaches the percolation threshold ($p_c$).

While previous studies focused on "flow" properties like electrical conductivity or fluid permeability, the challenge in mechanical elasticity is that a single path of connections—sufficient for flow—may not provide structural integrity. This work distinguishes between "central force" lattices and more realistic models that incorporate bending stiffness to accurately describe disordered media.

Theoretical Framework and Methods

The study utilizes a theoretical framework grounded in Rigidity Percolation and Scaling Theory to model the material as a bond lattice where each bond acts as a local elastic element.

Lattice Modeling

The total energy ($U$) of the system is formulated as the sum of stretching terms (changes in bond length) and bending terms (changes in angles between bonds). As illustrated in Figure 1, the deformation of the lattice involves displacements of nodes ($u_i, u_j$) and changes in the angle $\phi_{ijk}$ between adjacent bonds. This inclusion of bending stiffness is crucial; in a purely central-force network, many paths remain "floppy" even after connectivity is established. Adding bending terms ensures the rigidity threshold coincides with the connectivity threshold ($p_c$).

Illustration of the initial and deformed bond lattice showing node displacements and the angle $\phi_{ijk}$ used in energy calculations.

Finite-Size Scaling

To address the fractal nature of materials near the threshold, the system is subdivided into boxes of size $\xi$, representing the correlation length. By analyzing how the compliance ($K$) of these boxes adds up in series and parallel across the larger system length $L$, we derive the scaling relationship for the macroscopic Young's modulus. This approach allows for the estimation of the scaling exponent $\tau$ by analyzing the elastic energy of the "backbone" of the percolation cluster.

A percolation cluster at scale $L$ subdivided into boxes of correlation length $\xi$, illustrating the basis for finite-size scaling analysis.

Key Insights and Results

The Dominance of Bending

Near the percolation threshold, the energy required to deform the system is dominated by the bending of bonds. This occurs because the "radius of gyration" of the structural backbone scales with the system size, significantly amplifying the leverage of applied forces. This leads to a deep mathematical link between electrical conductivity ($g$) and Young's modulus ($E$), with the conjecture that $E/g \propto \xi^{-2}$, implying that mechanical properties degrade significantly faster than transport properties as disorder increases.

Scaling Laws and Exponents

The research confirms that Young’s modulus follows a power law: $$E \propto (p - p_c)^\tau$$ For 2D percolation, the scaling exponent $\tau$ is constrained between approximately 3.41 and 3.77. In higher dimensions ($d \geq 6$), the relation $\tau = 4$ becomes exact. For practical engineering applications in lower dimensions, $\tau \simeq 4$ serves as a reliable "rule of thumb" for predicting how stiffness vanishes in disordered networks.

Limitations and Future Directions

The current theory is strictly applicable to infinitesimal deformations (linear elasticity) and does not account for non-linear effects where the geometry of the network might change significantly under large loads. Furthermore, while the model focuses on lattices with bond-bending terms, the behavior of purely central-force lattices remains a distinct and more complex problem. Future work will likely involve numerical simulations to validate these analytical derivations across a wider variety of lattice geometries and material types.

Summary updated

Abstract

Abstract There are various physical properties that we may be interested in for a disordered material. In the previous chapter, we studied flow problems in disordered materials using the percolation system as a model disordered material. In this chapter we will address mechanical properties of the disordered material.
BibTeX
@inproceedings{malthesrenssen2024elastic,
  author = {Anders Malthe‐Sørenssen and Anders Malthe-Sorenssen},
  title = {{Elastic Properties of Disordered Media}},
  booktitle = {Lecture Notes in Physics},
  year = {2024},
  doi = {10.1007/978-3-031-59900-2\_10},
}
Figure