Call for Papers

Ishtiaq Ahmad, Zeeshan Kaleem, Jan Plachý, Hina Tabassum, Zdeněk Bečvář, Walid SaadIEEE Internet of Things Magazine 2023 · DOI · OpenAlex

This document is not a traditional research paper but a Call for Papers (CFP) for a special issue of the IEEE Internet of Things Magazine. It outlines a research roadmap for a specific technological convergence: Reconfigurable Intelligent Surfaces (RIS) and Unmanned Aerial Vehicles (UAVs) within the context of 6G and the Internet of Things (IoT).

TL;DR

This call for papers targets the integration of Reconfigurable Intelligent Surfaces (RIS) with Unmanned Aerial Vehicles (UAVs) to overcome the "uncontrollable" nature of wireless channels in 6G. By mounting smart, signal-reflecting surfaces on mobile drones, researchers aim to provide 360-degree coverage and high-capacity connectivity for massive IoT deployments in smart cities and beyond.

What Problem Does This Paper Address?

As we move toward 6G, the demand for "anywhere, anytime" connectivity for the Internet of Things (IoT) is skyrocketing. Applications like holographic telepresence, augmented reality (AR), and smart city infrastructure require high reliability and ultra-low latency.

However, two major hurdles remain:

  1. The Uncontrolled Channel: The wireless propagation environment is traditionally a "black box" that degrades signals through fading and interference.
  2. Line-of-Sight (LoS) Limitations: While drones (UAVs) are great for flexible deployment, they often struggle to maintain a clear line-of-sight to ground devices in dense urban "canyons" or when dealing with a massive number of concurrent connections.

The proposed solution is to use Flexible Reconfigurable Intelligent Surfaces (RIS)—essentially "smart mirrors" for radio waves—to actively shape the wireless environment rather than just reacting to it.

Methods

Since this is a CFP, it does not present a single methodology but rather invites researchers to submit work involving several cutting-edge techniques:

  • Joint Optimization: Developing algorithms that simultaneously optimize the flight trajectory of a UAV and the "phase shifts" (the way the RIS reflects signals) to maximize coverage.
  • Machine Learning (ML): Using AI to handle the complex, real-time processing required for beamforming and channel estimation in dynamic air-to-ground environments.
  • Integrated Sensing and Communication (ISAC): Designing systems where the same signal used for communication also helps the network "sense" or localize objects in the environment.
  • Blockchain Integration: Exploring decentralized protocols to secure the configuration of these intelligent surfaces against malicious actors.

Datasets

Not discussed in the paper. As a call for research, the document does not provide datasets. However, it explicitly encourages the submission of papers involving "Prototypes and testbeds for RIS-enabled air-to-ground based IoT networks," suggesting a need for new, empirical data in this field.

Key Insights and Ideas

The "aha moment" of this research direction lies in the synergy between mobility and reflectivity:

  • The 360-Degree Advantage: By deploying RIS on UAVs or using them to assist UAV links, the network can provide "angle-full" reflection. If a building blocks a direct signal, a drone-mounted RIS can maneuver to reflect the signal around the obstacle.
  • Passive Power: Unlike traditional relays that require power-hungry amplifiers, RIS can be nearly passive, making them ideal for battery-constrained drones and IoT devices.
  • Dynamic Adaptability: The combination allows the network to physically move (via UAV) and electronically reconfigure (via RIS) to meet shifting traffic demands in real-time.

Key Results

Not discussed in the paper. The document serves as a prompt for the scientific community to produce these results. The goal of the special issue is to compile quantitative evidence regarding throughput improvements, latency reduction, and energy efficiency gains from these integrated systems.

Limitations and Future Work

The CFP identifies several "hard problems" that the research community must still solve:

  • Channel Estimation & Decontamination: It is incredibly difficult to accurately estimate the wireless channel when the transmitter, the reflector, and the receiver are all potentially moving.
  • Spectrum Management: How do we manage frequency interference when thousands of smart surfaces are reflecting signals simultaneously?
  • Task Offloading: Determining whether computational tasks should be handled at the IoT device, the UAV, or a distant edge server remains a complex optimization challenge.
  • Hardware Realities: Moving from theoretical "holographic MIMO" frameworks to actual, deployable hardware that can fit on a small drone.

Summary updated

Abstract

The sixth generation (6G) mobile networks aim to provide integrated sensing, communication, localization, and computing services with low latency, high capacity, and high reliability in a real-time communication environment. The emergence of novel technologies is required to achieve a sustainable capacity growth at a low cost and a low energy consumption while meeting diverse Quality-of-Service (QoS) requirements. The Internet-of-Things (IoT) applications in smart cities, intelligent transportation, and entertainment focused services, like augmented and virtual reality or holographic telepresence, are quickly emerging and accelerating the development of new technologies to meet the strict requirements of future mobile networks. However, the wireless channel is an unavoidable factor and a primary hindrance in the performance. In addition to being uncontrolled, the wireless propagation channel has an unavoidable detrimental impact on the precision and adaptability of IoT networks. Such limitations motivate a need of reconfigurable intelligent surfaces (RISs) to facilitate IoT application with low energy consumption, low cost, and low latency.
BibTeX
@article{ahmad2023call,
  author = {Ishtiaq Ahmad and Zeeshan Kaleem and Jan Plachý and Hina Tabassum and Zdeněk Bečvář and Walid Saad},
  title = {{Call for Papers}},
  journal = {IEEE Internet of Things Magazine},
  year = {2023},
  doi = {10.1109/miot.2023.10145023},
}

Loading related content...

Figure