To accelerate an object, traditional propulsion systems rely on expelling mass. However, a fundamental bottleneck emerges: the propellant itself has mass. To accelerate a final payload to high velocities, a system must also accelerate the remaining fuel and its associated containment infrastructure. This creates an unfavorable scaling law where the required propellant mass increases exponentially with the desired velocity change. Across terrestrial ballistics, orbital maneuvers, and microspacecraft design, modern engineering focuses on alternative acceleration mechanisms to bypass this mass and momentum overhead.
The Hyper-Velocity Recoil Divergence
In conventional chemical ballistics, expanding gases push a projectile down a barrel. As target velocities exceed 1,800 m/s, the mass of the chemical propellant required to achieve these speeds scales exponentially, often surpassing the mass of the projectile itself.
Ristić et al. analyzed this phenomenon by comparing traditional powder-driven artillery to electromagnetic railguns. In a chemical system, the high-pressure exhaust gases must be accelerated alongside the projectile. This introduces a severe momentum penalty: the system must absorb the recoil energy of both the projectile and the massive volume of high-velocity gas. By contrast, electromagnetic systems utilize Lorentz forces to accelerate projectiles linearly without gas-phase mass overhead. While high-efficiency muzzle brakes can partially mitigate conventional recoil, the exponential growth of gas mass establishes a hard performance ceiling for chemical propulsion at hyper-velocities.
Eliminating Propellant via Environmental Interaction
The mass penalty is equally severe in space exploration, where spacecraft must carry substantial fuel solely for orbital capture and braking maneuvers. This dead weight limits payload capacity and mission longevity.
To circumvent this, Longuski et al. investigated aerobraking tethers as a propellantless alternative for orbital insertion. Instead of relying on chemical retro-rockets, an aerobraking tether leverages atmospheric drag to decelerate the spacecraft. By optimizing the maneuver trajectory—specifically utilizing an inclined rather than a strictly vertical tether orientation—the authors demonstrated that the structural mass of the tether can be minimized. This approach fundamentally shifts the deceleration burden from carried chemical mass to structural tension interacting with the environment.
Similarly, for launch vehicles escaping Earth's gravity, carrying both fuel and oxidizer compounds the takeoff weight. Yang et al. addressed this by modeling Rocket-Based Combined Cycle (RBCC) engines. By transitioning to air-breathing ramjet and scramjet modes during atmospheric flight, the vehicle utilizes ambient oxygen rather than carrying heavy onboard oxidizer tanks, significantly reducing the initial mass overhead.
Structural Mass Penalties in Micro-Propulsion
Even when alternative propulsion methods like electric ion thrusters are used to achieve high specific impulse, the physical state of the propellant can introduce severe mass penalties. Traditional ion thrusters rely on monatomic gases like xenon, which require heavy, high-pressure storage tanks and complex feed systems that do not scale down efficiently for microspacecraft.
To eliminate this structural overhead, Nakagawa et al. explored using liquid water as a low-pressure propellant for miniature microwave-discharge ion thrusters. While molecular water introduces plasma stability and energy loss challenges due to dissociation, it completely eliminates the need for bulky pressure vessels. This trade-off allows small satellites to bypass the structural mass constraints that typically limit miniature gas-phase propulsion systems.
Key Foundational Work
Optimal mass for aerobraking tethers (1995) — contributed 8 concept elements to this direction.
Recoil characteristics of an electromagnetic rail gun (2009) — contributed 5 concept elements to this direction.