Temporal Loop Multiplexing for Single Photon Sources

26 concepts13 papers1 proposal

Quantum computing and secure communication rely on a fundamental requirement: the ability to interfere single photons. For this interference to occur, photons must be indistinguishable—identical in frequency, polarization, and spatial mode—and they must arrive at a logic gate or beam splitter at the exact same nanosecond Wilk et al..

However, generating multiple identical photons simultaneously is notoriously difficult. Most high-quality sources are either probabilistic (heralded) or sequential. Temporal loop multiplexing solves this by using time as a buffer, "stacking" photons emitted at different times into a single, synchronized output bin.

The Synchronization Bottleneck

In a distributed quantum network, scaling is hindered by the "indistinguishability constraint." As Lugani et al. note, fabricating multiple independent sources that are truly identical is a significant engineering challenge. Even if sources are matched, Valivarthi et al. and Cao et al. highlight that maintaining temporal synchronization over long distances without a shared clock remains a major barrier.

When using heralded sources—where a photon is generated alongside a "herald" signal—the process is probabilistic. The chance of two independent sources firing at the exact same time is low, leading to poor scaling for multi-photon experiments.

Stacking Photons in Time

The core intuition behind temporal loop multiplexing is to replace spatial complexity (many sources) with temporal storage (one source plus a delay).

Peter J. Mosley proposed a scheme using a fiber-optic delay loop and a fast optical switch. Instead of hoping two sources fire at once, the system uses a single source and a "waiting room":

  1. Heralding: A source is pumped by a train of pulses. When a photon is successfully generated (heralded), the system is alerted.
  2. Storage: If a photon is generated in an early pulse, the fast switch routes it into a fiber delay loop. The length of this loop is precisely matched to the repetition rate of the pump laser.
  3. Synchronization: The photon recirculates in the loop, effectively "waiting" for a subsequent pulse to also produce a photon.
  4. Emission: Once the desired time bin arrives, the switch opens, releasing the stored photon(s) so they emerge simultaneously with a newly generated one.

As Hoggarth and Mosley demonstrate, this "stacking" of probability amplitudes from consecutive pulses into a single time bin significantly boosts the delivery probability. Their work suggests that multiplexing just four pulses can effectively bypass the probabilistic limits of single-photon generation.

Advantages of the Loop Architecture

This approach offers three primary benefits for quantum architecture:

  • Guaranteed Indistinguishability: Because the photons are emitted sequentially from the same source (such as a single atom in a cavity or a specific quantum dot), they are naturally more identical than photons from separate devices Legero et al..
  • Resource Efficiency: Mosley argues that this scheme provides a potential 10x performance improvement over non-multiplexed sources without the massive footprint of spatial multiplexing (which requires multiple sources and detectors).
  • Deterministic Logic: By using fiber-optic delay lines to synchronize sequential emissions, researchers can perform multi-qubit logic gates on integrated photonic circuits using only a single deterministic source Holleczek et al..

The Trade-off: Speed vs. Probability

While temporal multiplexing increases the probability of having a photon available in a specific "target" bin, it introduces a trade-off. As Mosley points out, the overall output rate of the system may be lower than a source operating at a raw, high repetition rate because the system must "wait" and stack pulses. However, for applications like quantum computing where simultaneity is a hard requirement for logic, the increase in per-bin probability is far more valuable than raw throughput.

By bridging the gap between deterministic generation and probabilistic emission, temporal loop multiplexing provides a scalable roadmap for complex quantum networks Hoggarth and Mosley.

Key Foundational Work

Quantum Beat of Two Single Photons (2004) — contributed 3 concept elements to this direction.
Polarization-Controlled Single Photons (2007) — contributed 1 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_temporal_loop_multiplexing_f274c37b,
  title = {temporal loop multiplexing},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/temporal-loop-multiplexing/rdr_f274c37bb81d439a9f9c77929d779b8a},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-20},
}

This exact version (version 1, frozen text):

@misc{lacuna_temporal_loop_multiplexing_f274c37b_v1,
  title = {temporal loop multiplexing},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/temporal-loop-multiplexing/rdr_f274c37bb81d439a9f9c77929d779b8a/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-20},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake