Simultaneously Transmitting and Reflecting Surfaces for Full Space Coverage

This direction is merged into another direction: phase-amplitude coupling (coupled phase-shift modeling). Its last version stays readable and citable here.

Version 1 of 113 papers16 conceptsfrozen 2026-10-04

Traditional Reconfigurable Intelligent Surfaces (RIS) act like smart mirrors. They use an array of passive elements to reflect electromagnetic waves toward a target, effectively "bending" the wireless channel to bypass obstacles. However, these surfaces are inherently limited by their geometry: they can only serve users located on the same side of the surface as the transmitter. This creates a "dead zone" behind the surface, restricting their utility in complex indoor or urban environments.

To overcome this, researchers have developed Simultaneously Transmitting and Reflecting (STAR) RIS—also known as Intelligent Omni-Surfaces (IOS). These surfaces don't just bounce signals; they allow energy to pass through them, providing 360-degree "full-space" coverage.

From Mirrors to Windows: The STAR-RIS Concept

The core innovation of STAR-RIS is the ability to control both the reflected and transmitted (refracted) components of an incident wave. As Shuhang Zhang, Boya Di, and Marco Di Renzo describe in their work on Intelligent Omni-Surfaces, this allows a single surface to serve users on both sides of a wall or window simultaneously.

To manage this dual functionality, Xidong Mu, Yuanwei Liu, and Robert Schober proposed three primary operating protocols in Simultaneously Transmitting And Reflecting (STAR) RIS Aided Wireless Communications:

  1. Energy Splitting (ES): Every element on the surface splits the incident signal into two parts—one reflected and one transmitted. This offers the highest degree of freedom but requires complex hardware.
  2. Mode Switching (MS): Each element is dedicated to either reflection or transmission. This is easier to implement but offers less granular control.
  3. Time Switching (TS): The entire surface alternates between reflecting and transmitting in different time slots.

The Challenge of Phase-Amplitude Coupling

In ideal mathematical models, researchers often assume we can change the phase of a signal (its timing) without affecting its amplitude (its strength). However, real-world hardware is rarely so cooperative.

A recurring theme across recent research is the problem of phase-amplitude coupling. As Mengnan Jian and George C. Alexandropoulos point out in their overview of RIS hardware, the physical mechanisms used to shift a signal's phase (like PIN diodes or varactors) inherently change the element's impedance, which in turn alters how much energy is reflected versus absorbed or transmitted.

This coupling means that if you try to steer a beam by adjusting phases, you might accidentally "dim" the signal in the process. S. Mehdi Hashemi and Hai Jiang emphasize that ignoring these physical constraints leads to suboptimal beamforming. Optimization algorithms must therefore treat phase and amplitude as a linked pair rather than independent variables.

Optimizing for the Real World

Because the math behind STAR-RIS involves non-convex constraints and coupled variables, finding the "perfect" configuration for the surface is computationally expensive. Researchers are tackling this with several strategies:

  • NOMA Integration: Ziyi Xie and Arumugam Nallanathan have shown that STAR-RIS is a natural fit for Non-Orthogonal Multiple Access (NOMA). By using the surface to create distinct channel conditions for different users, the network can serve multiple people on the same frequency simultaneously.
  • Machine Learning: To handle the complexity of multi-surface environments, Po-Heng Chou and Walid Saad applied Deep Reinforcement Learning (DRL) to adaptively tune phase shifts while accounting for hardware impairments.
  • Discrete Optimization: In practice, we cannot choose any phase shift; we are limited to a few bits of resolution (e.g., 2-bit or 4-bit). Hancheng Zhu and Vincent Lau developed a unified framework demonstrating that even with these low-resolution discrete shifts, STAR-RIS can achieve near-optimal performance if the hardware constraints are properly decoupled during the optimization process.

By moving from 180-degree reflection to 360-degree transmission and reflection, STAR-RIS transforms the wireless environment from a series of obstacles into a fully programmable, "omni-directional" asset for 6G communications.

Papers in this version

History & citationVersion 1 · 2026-10-04

Merged into another direction · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_simultaneously_transmitting_and_reflecti_02fb3103,
  title = {Simultaneously Transmitting and Reflecting Surfaces for Full Space Coverage},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/simultaneously-transmitting-and-reflecting-surfaces-for-full-space-coverage/rdr_02fb3103543441f9aeec4a048f695dc8},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-22},
}

This exact version (version 1, frozen text):

@misc{lacuna_simultaneously_transmitting_and_reflecti_02fb3103_v1,
  title = {Simultaneously Transmitting and Reflecting Surfaces for Full Space Coverage},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/simultaneously-transmitting-and-reflecting-surfaces-for-full-space-coverage/rdr_02fb3103543441f9aeec4a048f695dc8/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-22},
}