Adhesive bonding is a fundamental requirement in modern medicine, essential for closing wounds, stabilizing surgical implants, and delivering therapeutics. However, performing adhesive bonding inside the human body presents a severe physical challenge: the presence of interfacial fluids. Whether it is blood in a traumatic wound, saliva in the oral cavity, or exudate on a chronic ulcer, moisture acts as a persistent barrier to stable bonding.
To design effective medical adhesives, researchers must move beyond traditional glues that require dry environments and instead develop materials capable of actively managing, displacing, or co-opting interfacial fluids.
The Problem: The Interfacial Fluid Barrier
On a dry substrate, an adhesive can make intimate contact with a surface, allowing molecular forces—such as hydrogen bonding, van der Waals interactions, or covalent crosslinking—to take hold. On wet biological tissue, however, fluids create both a macroscopic and microscopic barrier.
Dry Surface:
[ Adhesive ] ---> Direct Contact ---> [ Tissue Surface ] (Strong Bond)
Wet Surface (Traditional):
[ Adhesive ] ---> [ Interfacial Fluid Layer ] ---> [ Tissue Surface ] (Failure)
At the macroscopic level, fluids act as a lubricant. As noted by Xue et al., biological fluids prevent synthetic materials from forming immediate, stable contact with the underlying tissue matrix. In dynamic environments like a beating heart or a bleeding artery, this lack of immediate contact leads to material displacement or wash-off before the adhesive can cure, a vulnerability highlighted in topical drug delivery applications by Li et al. and Guo et al..
At the microscopic level, fluids shield the tissue's chemical functional groups. Chen et al. describe how active bleeding forms a physical barrier that prevents traditional adhesives from reaching the structural tissue. This phenomenon is not unique to soft tissue; it has long been documented in dental and maxillofacial surgeries. For instance, Yoshimasu et al. and Yoshimasu et al. demonstrated that active bleeding and salivation drastically compromise resin bonds during surgical hardware fixation. Even when fluids are minimized, mechanical preparation can leave behind a "smear layer" of microscopic organic and inorganic debris that acts as an additional barrier to effective bonding, as characterized by Watanabe et al..
To overcome these challenges, modern biomaterials employ three primary strategies: fluid displacement, fluid integration, and biomimetic chemical adaptation.
Strategy 1: Active Fluid Displacement and Absorption
The most direct way to bond to a wet surface is to clear the fluid out of the way. Rather than relying on manual drying, which is often impossible in active surgical fields, modern adhesives are engineered to absorb or displace interfacial moisture autonomously.
One approach involves the use of highly porous, micro-scale matrices that act as localized vacuum systems. Xue et al. developed adhesive cryogel particles (ACPs) that can be applied directly into irregular, fluid-filled tissue defects. These particles rapidly absorb the surrounding moisture, clearing the interface and instantly consolidating into a tough, localized hydrogel "staple."
[ ACP Particle ] + [ Interfacial Fluid ] ---> [ Fluid Absorbed Into Pores ] ---> [ Direct Tissue Contact ]
Similarly, Wang et al. developed a single-component adhesive sponge (MonoSeal) that utilizes an "Autopenetrative Adhesion" (APA) mechanism. When pressed against blood-wetted tissue, the sponge structure rapidly evacuates the intervening fluid layer, allowing the underlying polymer matrix to achieve direct contact with the tissue surface. This displacement capability enables the material to withstand high-pressure arterial environments, achieving burst pressures well above normal human systolic blood pressure.
Strategy 2: Fluid Integration and Co-Opting
Instead of treating interfacial fluid purely as an obstacle to be removed, an alternative paradigm seeks to incorporate the fluid into the bonding mechanism itself. This is particularly effective when dealing with blood, which is rich in proteins that can be repurposed as structural components of the adhesive matrix.
Chen et al. pioneered this approach using blood-imbibing and -crosslinking microparticles (BICMs). When these microparticles encounter an active bleed, they physically draw the blood into their internal pores via capillary action. Once inside, the particles chemically crosslink with the blood proteins themselves.
[ BICM Particle ] + [ Blood Proteins ] ---> [ Chemical Crosslinking ] ---> [ Fortified Composite Clot ]
Instead of fighting the fluid barrier, this mechanism transforms the blood into a "fortified clot" that is covalently anchored to the surrounding tissue. Because the adhesive bond is formed with the blood rather than through it, the system remains highly effective even in patients with compromised natural coagulation pathways.
Strategy 3: Biomimetic and Dynamic Chemical Adaptation
A third strategy focuses on the molecular design of the polymer networks, utilizing chemical functionalities that can operate effectively despite the presence of water molecules.
Nature has solved this problem through marine organisms, such as mussels, which secrete proteins that displace water films to adhere firmly to wet rocks. Taking inspiration from this chemistry, Lu et al. developed a dopamine-modified hyaluronic acid scaffold. The catechol functional groups in the dopamine mimic mussel adhesion, enabling a regenerative bone scaffold to "glue" itself instantly to wet skull defects without requiring mechanical screws or nails.
Other networks rely on rapid, reversible non-covalent interactions that can dynamically compete with water molecules. Yu et al. demonstrated a hydrogel system that forms a dense network of hydrogen bonds in under 10 seconds. This rapid kinetics allows the material to displace or integrate with surface moisture faster than the fluid can disrupt the network, sealing wounds effectively.
To ensure these bonds remain stable over time in moving organs, researchers combine these mechanisms with secondary crosslinking strategies. For example, Hu et al. developed a photo-triggerable double cross-linked hydrogel. The initial application achieves immediate tissue wet-adhesion, while a subsequent flash of light triggers a secondary internal crosslinking network, ensuring the dressing does not rely on simple physical entanglement, which easily fails in dynamic physiological environments.
Clinical Outlook
The evolution of wet-surface adhesion represents a shift from passive coverage to active interfacial engineering. As emphasized in comprehensive reviews by Guo et al. and material evaluations by Sun et al., the ultimate goal of this field is to create materials that combine rapid hemostasis with reliable, long-term tissue integration. By understanding and manipulating the physics of the fluid interface, these diverse strategies turn a hostile biological environment into a manageable, and sometimes useful, component of the surgical interface.
Key Foundational Work
New direct bonding bracket for oral surgery. Part 3. Preprimed bracket. (1985) — contributed 2 concept elements to this direction.
New direct bonding bracket for oral surgery. Part 2. Clinical application. (1985) — contributed 1 concept elements to this direction.
Application of Erbium: YAG Laser in Dentistry (1994) — contributed 1 concept elements to this direction.