Max-Min Fairness in Physical Layer Security

This direction is merged into another direction: perfect channel state information assumption (imperfect channel state information). Its last version stays readable and citable here.

Version 1 of 112 papers21 conceptsfrozen 2026-10-04

In traditional wireless network design, the goal is often to maximize the "sum-rate"—the total amount of data moving through the system. However, when it comes to security, this aggregate approach creates a dangerous "weakest link" problem. If a system prioritizes users with the strongest signals to boost the total score, it may leave distant or disadvantaged users with zero protection, making them easy targets for eavesdroppers.

To solve this, researchers have shifted toward Max-Min Secrecy Optimization. Instead of maximizing the average, this approach focuses on maximizing the secrecy rate of the most vulnerable user in the network.

The Vulnerability of the Average

In a multi-user environment, users are scattered at varying distances from a base station. Standard optimization tends to "sacrifice" the security of users with poor channel conditions to allocate more power and bandwidth to those with clear, high-speed connections. Monir Abughalwa and colleagues argue in "Security for Everyone" in Finite Blocklength IRS-aided Systems With Perfect and Imperfect CSI that this leads to significant resource imbalances. In their view, security is not a commodity to be averaged; it is a baseline requirement that must be guaranteed for every participant.

This shift from "sum-secrecy" to "max-min secrecy" ensures that the optimization process cannot ignore a user just because they are far away or blocked by an obstacle. As Hongjiang Lei and Haosi Yang demonstrate in their work on aerial cognitive radio networks, implementing minimum secrecy rate constraints prevents the system from prioritizing high-quality links at the expense of the "weakest" nodes.

Lifting the Floor with Intelligent Surfaces

The primary tool for achieving this fairness is the ability to physically "shape" the radio environment. Intelligent Reflecting Surfaces (IRS)—arrays of small elements that can alter the phase of electromagnetic waves—allow researchers to steer signals toward legitimate users and away from eavesdroppers.

In Securing NOMA Networks by Exploiting Intelligent Reflecting Surface, Zheng Zhang 0037 and Yuanwei Liu show how IRS can be used to boost the minimum secrecy rate even when the eavesdropper's exact location is unknown. By optimizing the phase shifts of the IRS, the system can create "constructive interference" at the weakest user's location and "destructive interference" at the eavesdropper, effectively leveling the playing field.

This concept is extended by Arthur S. de Sena in the context of Holographic MIMO networks. By combining max-min power allocation with artificial noise, they achieved a 100% increase in sum secrecy rates compared to fixed-power methods, proving that focusing on the weakest user can actually improve the efficiency of the entire system.

Accounting for Physical Realities

While the theory of max-min fairness is elegant, its implementation must face the messy reality of hardware. In Security Enhancement for Coupled Phase-Shift STAR-RIS Networks, Zheng Zhang and Zhaolin Wang address the fact that transmission and reflection phase shifts are often "coupled" (linked) in real hardware. Their work shows that even with these physical constraints, max-min algorithms can ensure fair, high-security communication for users on both sides of a surface.

Furthermore, Hoang Duong Tuan and H. Vincent Poor have developed robust path-following procedures that maintain this "worst-case" security even when the system has imperfect knowledge of the communication channels.

Why It Works: Intuition

The intuition behind max-min secrecy is similar to the "water-filling" principle in communications, but applied to a security threshold. Instead of pouring resources into the deepest "wells" (the best channels), the system identifies the "highest peak" of vulnerability and directs its beamforming, power, and reflecting surfaces to lower that peak.

By prioritizing the user with the lowest secrecy capacity, the optimization naturally balances the network. It forces the transmitter to find a configuration where no user is left exposed, creating a "security floor" that protects the entire network from targeted eavesdropping. As Jian Li and Lan Zhang conclude in their multi-IRS study, this balance is the only way to ensure that the overall security of a multi-user system isn't compromised by its single most exposed connection.

Papers in this version

History & citationVersion 1 · 2026-10-04

Merged into another direction · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_max_min_fairness_in_physical_layer_secur_12326e9f,
  title = {Max-Min Fairness in Physical Layer Security},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/max-min-fairness-in-physical-layer-security/rdr_12326e9fa07845e195f28d47d3d78e7e},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 1, frozen text):

@misc{lacuna_max_min_fairness_in_physical_layer_secur_12326e9f_v1,
  title = {Max-Min Fairness in Physical Layer Security},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/max-min-fairness-in-physical-layer-security/rdr_12326e9fa07845e195f28d47d3d78e7e/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}