Distance Estimation Without Clock Synchronization

45 concepts35 papers1 proposal

To measure the distance between two wireless nodes, the most direct physical metric is the Time of Flight (ToF)—the time it takes for an electromagnetic or acoustic wave to travel through space. If a transmitter sends a packet at time $t_1$ and the receiver gets it at $t_2$, the distance is simply the propagation speed multiplied by the elapsed time: $d = c \times (t_2 - t_1)$.

However, this elegant equation hides a massive practical hurdle: $t_1$ is measured on the transmitter's local clock, and $t_2$ is measured on the receiver's local clock. If these two clocks are not perfectly synchronized, the simple subtraction $t_2 - t_1$ captures not just the flight time, but also the unknown time offset and frequency drift between the hardware oscillators.

Traditionally, overcoming this required expensive atomic clocks, continuous network-wide synchronization protocols, or dedicated physical wiring. A robust body of research turns this problem on its head. By restructuring how signals are exchanged, leveraging environmental geometry, or applying clever algebraic transformations, systems can completely eliminate or isolate clock errors. As noted by Eylem Ekici et al. in Wireless Heterogeneous Networks and Next Generation Internet, localizing mobile nodes via signal propagation time without a global clock minimizes communication overhead and hardware complexity across distributed networks.

Active Cancellation: Two-Way and Double-Sided Ranging

The simplest way to eliminate a constant clock offset is to measure Round-Trip Time (RTT). If Node A sends a signal and Node B immediately reflects it back, Node A can measure the total round-trip time on its own local clock. Because the start and end timestamps are recorded by the same oscillator, the absolute clock offset between Node A and Node B mathematically cancels out. As Hasan Albinsaid et al. demonstrate in Design and Development of a Scalable and Energy-Efficient Localization Framework Leveraging LoRa Ranging-Capable Transceivers, this two-way exchange allows for effective low-power ranging by subtracting the known processing delays of the responding device. Similarly, Neil Zhenqiang Gong et al. show in PIANO: Proximity-based User Authentication on Voice-Powered Internet-of-Things Devices that combining independent local arrival time differences cancels out clock offsets on commodity hardware.

However, Node B cannot respond instantly; it takes a finite amount of time to process the packet and trigger its transmitter. During this turnaround time, Node B's clock drifts relative to Node A's clock due to slight differences in their crystal oscillator frequencies. This clock drift introduces an error that scales linearly with the turnaround time.

To neutralize this drift, researchers use Double-Sided Two-Way Ranging (DS-TWR). By introducing a third message—effectively performing two round-trip measurements back-to-back—the relative frequency skews of both clocks can be mathematically balanced. Juri Sidorenko demonstrates in DecaWave Ultra-Wideband Warm-Up Error Correction that these multi-message protocols allow unsynchronized transceivers to achieve precise distance estimations despite the frequency offsets inherent in independent crystal oscillators.

In subsequent work, Juri Sidorenko shows in Error Corrections for Ultrawideband Ranging that alternative DS-TWR protocols neutralize clock drift through linear interpolation of asymmetric response delays, keeping measurement noise low even when hardware processing times vary significantly. This protocol has found widespread adoption in high-precision tracking applications, such as the robotic inspection system developed by Jie Li in Intelligent Inspection Robotic System for Bridge Cable Defect Identification and Positioning, which relies on DS-TWR to pinpoint structural defects with centimeter-level accuracy.

Passive Tracking and Shared-Signal Invariance

Active bidirectional communication requires every node to transmit signals, which quickly saturates network bandwidth as the number of devices grows. To scale up capacity, systems must allow passive receivers to estimate distance without synchronization. The key intuition lies in exploiting shared signal paths.

Consider a system where a single transmitter sends a signal, and a passive receiver captures both the direct line-of-sight signal and a version of that same signal forwarded by a local relay station. Because both the direct and relayed signals originate from the exact same transmission event, they share an identical emission timestamp and transmitter clock offset:

$$t_{\text{direct}} = t_{\text{emit}} + \tau_{\text{direct}} + \theta_{\text{TX}}$$ $$t_{\text{relayed}} = t_{\text{emit}} + \tau_{\text{relayed}} + \theta_{\text{TX}}$$

When the receiver calculates the Time Difference of Arrival (TDOA) by subtracting $t_{\text{direct}}$ from $t_{\text{relayed}}$, both $t_{\text{emit}}$ and $\theta_{\text{TX}}$ are completely eliminated. Furong Peng et al. leveraged this mechanism in TDOA-MCM: A TDOA-based Multi-path Communication Mechanism for UWB Indoor Positioning to design a multi-path communication framework that achieves sub-10 cm indoor positioning accuracy while keeping the tracking tags entirely passive and the base stations unsynchronized.

This concept extends naturally to the physical environment. When a wireless signal bounces off walls and objects, the receiver captures multiple copies of the signal at different delays and phases. Because hardware-induced clock drift affects every single path within a given packet identically, subtracting the phase or timing of one path from another isolates the pure spatial differences. Manikanta Kotaru et al. proved in Position Tracking for Virtual Reality Using Commodity WiFi that calculating the relative phase differences between multiple signal paths within a single WiFi packet effectively cancels out frequency offsets, enabling sub-centimeter position tracking without explicit clock synchronization.

For multi-anchor systems, passive tracking can also be achieved by altering the transmission structure. Luca Santoro et al. demonstrate in Scale up to infinity: the UWB Indoor Global Positioning System that fixed anchors can broadcast double-consecutive messages to cancel out clock drift for passive listening tags, decoupling system capacity from performance. Alternatively, Norbert Scherer‐Negenborn shows in Fusion of time of arrival and time difference of arrival for ultra-wideband indoor localization that passive stations can derive TDOA measurements simply by monitoring standard two-way ranging exchanges between a reference station and a tag, enabling wireless clock calibration without dedicated synchronization pulses.

Environmental Fingerprints as Spatial Anchors

In bi-static sensing and Integrated Sensing and Communication (ISAC) systems, a transmitter and a separate receiver map the environment using radar-like reflections. Clock asynchronism between the two devices normally blurs the resulting spatial images. However, the static environment itself can act as a stabilizing timing reference.

While moving targets create dynamic, unpredictable reflections, stationary objects (like walls, pillars, or buildings) generate a constant, predictable reflection profile—often referred to as static clutter. Because these environmental features do not move, their true physical delay is invariant. Any temporal shifting or phase rotation observed in their reflections from one packet to the next must be caused entirely by the hardware clock drift of the unsynchronized devices.

[ Unsynchronized TX ] ----(Direct Path: Unknown Offset)----> [ RX ]
        \                                                     /
         \                                                   /
    (Reflected Path)                                   (Reflected Path)
           \                                                 /
            v                                               v
     [ Stationary Wall ] <============================ [ Stationary Pillar ]
                         (Constant Spatial Fingerprint)

Jingbo Zhao et al. demonstrated in Subspace-Based Super-Resolution Sensing for Bi-Static ISAC with Clock Asynchronism that these static environmental reflections can serve as a stable timing anchor to restore absolute delay measurements without a shared hardware clock. Similarly, Xiao-Yang Wang et al. showed in Clutter Suppression, Time-Frequency Synchronization, and Sensing Parameter Association in Asynchronous Perceptive Vehicular Networks that by measuring the circular shift of this static environmental "fingerprint" in the delay-Doppler domain, an asynchronous network can accurately estimate carrier frequency and time offsets without requiring a direct line-of-sight path between nodes.

Mathematical Invariance and Joint Parameter Estimation

If clock offsets and spatial coordinates are deeply intertwined in time-of-arrival equations, they can also be separated through mathematical design. One approach is to find mathematical operators that project the raw timing data into a subspace where the clock errors disappear entirely.

Dalia El Badawy et al. introduced this in Localizing Unsynchronized Sensors with Unknown Sources by applying a geometric centering matrix directly to a time-of-arrival data matrix. This linear transformation mathematically eliminates unknown emission times and receiver clock offsets simultaneously, proving that relative spatial relationships are fully recoverable from unaligned arrival times without explicit synchronization.

Instead of eliminating the clock parameters, a system can treat them as hidden variables to be jointly estimated alongside the physical positions. For instance, fractional clock drift causes measured round-trip times to exhibit a periodic, sawtooth-like waveform over time. Satyam Dwivedi et al. demonstrated in Joint Ranging and Clock Parameter Estimation by Wireless Round Trip Time Measurements that analyzing this sawtooth pattern allows a master node to infer frequency skew and phase offsets purely from the variance in response timing, bypassing the need to exchange digital timestamp packets.

By framing clock parameters as cancelable or trackable terms within the positioning equations, modern frameworks achieve high-precision tracking on commodity hardware. As David Chiasson demonstrates in Asynchronous Hyperbolic UWB Source-Localization and Self-Localization for Indoor Tracking and Navigation, algebraic reformulations of TDOA equations allow anchor nodes to establish a shared relative time frame simply by monitoring each other's packet arrival times, enabling centimeter-level tracking using entirely unsynchronized hardware.

Ultimately, incorporating hardware-induced timing delays directly into the position estimation framework proves that expensive hardware synchronization is no longer a prerequisite for accurate wireless localization, a principle validated by Dave Zachariah et al. in Self-Localization of Asynchronous Wireless Nodes With Parameter Uncertainties.

Cross-Domain Applicability

The principle of bypassing clock synchronization spans multiple physical domains. In underwater environments where synchronization is notoriously difficult due to acoustic propagation characteristics, Zhenghao Xi et al. in Research on Underwater Wireless Sensor Network and MAC Protocol and Location Algorithm and Eduardo Alexander Iscar Ruland et al. in Low cost underwater acoustic localization demonstrate that relative arrival times or one-way travel times can bypass global clock requirements.

Even in optical communications, Zhaohui Li et al. show in Signed chromatic dispersion monitoring of 100Gbit/s CS-RZ DQPSK signal by evaluating the asymmetry ratio of delay tap sampling that delay-tap asynchronous sampling enables precise signal monitoring without requiring explicit clock recovery hardware. Across all these fields, the core insight remains identical: structured physical and mathematical relationships can consistently substitute for synchronized hardware clocks.

Key Foundational Work

Wireless Heterogeneous Networks and Next Generation Internet (2010) — contributed 1 concept elements to this direction.
Self-Organization of Randomly Placed Sensors (2002) — contributed 1 concept elements to this direction.
Signed chromatic dispersion monitoring of 100Gbit/s CS-RZ DQPSK signal by evaluating the asymmetry ratio of delay tap sampling (2010) — contributed 1 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_double_sided_two_way_ranging_daa9a512,
  title = {double-sided two-way ranging},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/double-sided-two-way-ranging/rdr_daa9a5129dab489db32b2b84c513f8c4},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-20},
}

This exact version (version 1, frozen text):

@misc{lacuna_double_sided_two_way_ranging_daa9a512_v1,
  title = {double-sided two-way ranging},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/double-sided-two-way-ranging/rdr_daa9a5129dab489db32b2b84c513f8c4/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-20},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake