In the evolution toward 6G, the concept of a "smart radio environment" has transitioned from simple reflective surfaces to more sophisticated interfaces. While traditional Reconfigurable Intelligent Surfaces (RIS) act as smart mirrors—reflecting signals within a 180-degree half-space—the emergence of Simultaneously Transmitting and Reflecting (STAR) RIS (also known as STARS) allows for a "smart window" that provides full 360-degree coverage.
As Jiaqi Xu, Zhaolin Wang, and colleagues outline in Simultaneously transmitting and reflecting (STAR) RISs for 6G: fundamentals, recent advances, and future directions, this technology is pivotal for ubiquitous connectivity. However, a significant gap exists between idealized mathematical models and the physical reality of the hardware: the problem of coupled phase shifts.
The Independence Myth
Early theoretical models of STAR-RIS assumed that the phase of the reflected signal ($\phi_r$) and the transmitted signal ($\phi_t$) could be adjusted independently. In this idealized view, an operator could "steer" the reflected beam to one user and the transmitted beam to another without any interference between the two decisions.
However, research by Yuanwei Liu, Xidong Mu, and Robert Schober in Simultaneously Transmitting and Reflecting (STAR)-RISs: A Coupled Phase-Shift Model demonstrated that for passive, lossless metasurfaces, this independence is physically impossible. Because the same physical element interacts with the incident wave to produce both outputs, the laws of physics (specifically energy conservation and Maxwell’s equations) impose a strict mathematical link between them.
The Physics of the $\pi/2$ Constraint
To understand why this coupling occurs, imagine a single unit cell on a surface. When a wave hits it, the energy must be conserved. In a lossless passive element, the phase difference between the transmission and reflection coefficients is not arbitrary.
The research shows that for these surfaces, the phase difference $|\phi_t - \phi_r|$ is typically constrained to specific values, most commonly $\pi/2$ or $3\pi/2$.
This means that if you adjust the surface to shift the phase of the reflected wave by 30 degrees, the transmitted wave's phase must also shift by a corresponding amount to maintain that fixed difference. You cannot turn one "knob" without the other turning automatically. As Zheng Zhang and Zhaolin Wang note in Security Enhancement for Coupled Phase-Shift STAR-RIS Networks, ignoring this coupling leads to "over-optimistic" performance estimates that fail when deployed on real hardware.
Impact on Beamforming and Security
This coupling significantly reduces the "degrees of freedom" available for beamforming. In a multi-user scenario, a base station might want to nullify a signal toward an eavesdropper while boosting it for a legitimate user. If the eavesdropper is on the transmission side and the user is on the reflection side, the coupled phase constraint might make it impossible to satisfy both conditions simultaneously.
The challenge extends to various system architectures:
- NOMA Systems: In Joint Design for Simultaneously Transmitting And Reflecting (STAR) RIS Assisted NOMA Systems, Jiakuo Zuo and Lingyang Song show that decoding orders and power allocation must be jointly optimized with these hardware constraints to maintain the advantages of non-orthogonal access.
- Channel Estimation: Chenyu Wu and Changsheng You found that coupling complicates the initial "handshake" of the network, making certain protocols like Time Switching more robust for estimation than Energy Splitting (Channel Estimation for STAR-RIS-aided Wireless Communication).
Strategies for Mitigation
Researchers have developed several strategies to work within—or break—these constraints:
- Constraint-Aware Optimization: Instead of assuming independence, algorithms now incorporate the coupling as a penalty term. Guangyu Zhu and Xidong Mu utilize penalty-based constraint transformations to find the "least-bad" trade-off between the two sides of the surface (STAR-RIS Assisted SWIPT Systems: Active or Passive?).
- Diversity Preserving Strategies: In STAR-RISs: A Correlated T&R Phase-Shift Model and Practical Phase-Shift Configuration Strategies, Yuanwei Liu proposes the DP-PSC strategy, which ensures that even with coupled phases, the system can still achieve full diversity gain by carefully choosing which discrete phase states to use.
- Active STAR-RIS: The most direct way to break the coupling is to move away from purely passive hardware. By integrating amplifiers into the surface, as explored by Rongguang Song and Haifan Yin in Design and Prototyping of Filtering Active STAR-RIS with Adjustable Power Splitting, researchers can achieve independent phase control. The active components provide the necessary energy to decouple the transmission and reflection coefficients, though at the cost of higher power consumption and hardware complexity.
By shifting the focus from idealized "smart windows" to the reality of coupled electromagnetic responses, this research direction ensures that the 360-degree coverage promised by STAR-RIS remains viable for practical 6G deployments.