Controlling Internal Architecture and Porosity via Additive Manufacturing

36 concepts33 papers1 proposal

Traditional manufacturing paradigms typically treat materials as homogeneous blocks. If an application requires a porous material, gases are chemically introduced to create random, stochastic foams. If structural integrity is paramount, the component is machined as a solid mass.

Additive manufacturing (AM) fundamentally breaks this dichotomy. By building components layer-by-layer, AM allows engineers to design the inside of a material just as precisely as the outside. This capability enables the decoupling of properties that are traditionally locked together—such as maximizing mechanical strength while minimizing weight, or optimizing fluid permeability without sacrificing structural integrity.

Beyond Solid Matter: The Power of Internal Design

The core intuition behind modern architectural control is deterministic optimization. Instead of accepting the random pore distributions of traditional foams, researchers use computational algorithms to map out exact material coordinates.

For instance, Shiwei Zhou et al. demonstrated this by utilizing a modified bidirectional evolutionary structural optimization (BESO) procedure to design complex cellular microstructures in their work. By systematically adding and removing material computationally based on transport gradients, the authors generated optimized multi-material structures with tailored heat and mass transport properties, which were subsequently validated via 3D printing. This approach proves that complex, mathematically derived internal geometries can be physically realized to control fluid and thermal behavior.

Geometric Topologies: Lattices, Auxetics, and Minimal Surfaces

To structure internal space effectively, researchers rely on advanced geometric frameworks rather than simple rectangular grids. Prominent among these are Triply Periodic Minimal Surfaces (TPMS)—such as gyroids and diamond lattices—and auxetic configurations.

TPMS geometries are highly valued because their continuous, mathematically defined curvature eliminates sharp internal corners, which typically act as stress concentration points under load. Furthermore, their open, interconnected channels maximize surface area while maintaining high fluid permeability.

Standard Grid (Sharp Corners)       TPMS Gyroid (Continuous Curvature)
   ┌───────┬───────┐                     ╭───────╮       ╭───────╮
   │       │       │                     │       ╰───────╯       │
   ├───────┼───────┤                     ╰───────╮       ╭───────╯
   │       │       │                     │       ╰───────╯       │
   └───────┴───────┘                     ╰───────╯       ╰───────╯
(High Stress Concentrations)          (Uniform Stress Distribution)

As shown by Cheng Deng 0002 et al. in their study, fabricating high-entropy alloy structures with gyroid and diamond topologies via selective laser melting (SLM) yields an exceptional balance of mechanical robustness and catalytic surface area for wastewater treatment. Similarly, Zhou Li et al. leveraged SLM to construct titanium alloy scaffolds based on TPMS geometries in their research, creating interpenetrating phase composites that excel at absorbing energy under high-strain-rate dynamic impacts.

Beyond minimal surfaces, additive manufacturing enables non-intuitive mechanical behaviors through auxetic structures, which possess a negative Poisson's ratio (expanding radially when stretched longitudinally). Jerome Jean-Joseph et al. utilized stereolithography to print a "tetra chiral" auxetic helical structure for medical applicators in their paper. This geometry allows the device to flexibly expand and adapt to complex anatomical contours while maintaining stable, uniform contact with surrounding tissue.

Sacrificial Templating for Intricate Hollow Networks

While printing continuous lattices is effective for porous solids, creating perfectly smooth, hollow, multi-branched internal channels—such as synthetic vascular networks—presents a different challenge. Directly printing hollow overhanging structures often fails due to gravitational sagging or trapped, un-fused raw material inside the channels.

To bypass these geometric limitations, researchers employ sacrificial template 3D printing. The core intuition is to print the "negative space" of the desired channels using a temporary, easily dissolvable material, encapsulate this template within the primary structural matrix, and then chemically wash the template away.

1. Print Sacrificial Core      2. Encapsulate Matrix      3. Dissolve Core Away
       ┌─────────┐                 ██████████████             ████  ░░░░  ████
       │  Core   │                 ███┌─────────┐███          ███    ░░░░    ███
       └─────────┘                 ███│  Core   │███          ███    ░░░░    ███
                                   ██████████████             ████  ░░░░  ████

Using this strategy, Reiner Creutzburg et al. developed a reverse molding technique in their work to embed three-dimensional, multi-channeled architectures within soft hydrogels, dramatically improving internal nutrient exchange. Similarly, Lingchi Kong et al. utilized a dissolvable sugar template to fabricate personalized, bifurcated nerve grafts in their study, producing hollow shells with tuned porosity that match specific anatomical defects.

In a single-author study demonstrating the versatility of this approach for medical imaging, Hongyu An showed in their paper that fused deposition modeling (FDM) can rapidly construct medical catheters containing complex internal fluid-filled cavities. By filling these printed voids with liquid vitamin D, the author created passive tracking markers that remain highly visible and completely artifact-free during MRI-guided surgeries.

In Situ Microstructural and Surface Engineering

The advantages of additive manufacturing extend far below macro-scale geometry. The fundamental physics of laser-based AM—characterized by localized, high-energy melting followed by ultra-rapid cooling—can be exploited to manipulate material microstructures at the nanoscale during the fabrication process.

In powder-bed fusion techniques like selective laser melting (SLM), a laser selectively fuses metallic powder particles layer by layer. As detailed by Van Luong Nguyen et al. in their investigation, the extreme thermal cycles inherent to SLM prevent large crystalline grains from forming. Instead, they freeze unique, highly refined microstructures into tool steel, yielding significantly higher hardness and distinct nano-mechanical strain-rate sensitivities compared to traditionally cast or machined counterparts.

Rather than treating surface roughness as an accidental defect of layer-by-layer printing, researchers can intentionally program the laser's path to engineer surface topographies in real time. Lijun Shan et al. demonstrated this in situ control in their paper by systematically altering laser scanning parameters to generate distinct stripy, bulbous, or composite microstructures directly onto titanium implants. This eliminates the need for hazardous post-print chemical etching while directly enhancing cell adhesion and bone integration.

To further accelerate this biological healing process, Su Wang et al. combined SLM geometric control with post-print laser texturing in their work. By printing a periodic tetrahedral lattice and treating it with a femtosecond laser, the authors created a super-hydrophilic, micro-nano surface topography that nearly doubled early-stage bone ingrowth in animal models.

Tailoring Porosity for Biological and Pharmaceutical Delivery

The ability to precisely govern pore size, interconnectivity, and spatial distribution has made architectural control a cornerstone of modern tissue engineering and personalized medicine.

In bone tissue engineering, a scaffold must match the multi-level porosity of natural bone to allow cells to migrate inward and blood vessels to sprout. Chaoqian Zhao et al. leveraged slurry extrusion 3D printing in their study to fabricate bioceramic scaffolds with precisely controlled pore architectures, successfully accelerating both bone growth (osteogenesis) and blood vessel formation (angiogenesis). To safely incorporate delicate therapeutic agents into these porous matrices without destroying them, Cong Li et al. utilized low-temperature deposition 3D printing in their research, tailoring the porous structure of bone scaffolds while fully preserving the biological activity of embedded antimicrobial peptides.

High Density / Low Porosity            Low Density / High Porosity
   ┌───────────────────────┐              ┌───────────────────────┐
   │ █ █ █ █ █ █ █ █ █ █ █ │              │ █   █   █   █   █   █ │
   │ █ █ █ █ █ █ █ █ █ █ █ │              │                       │
   │ █ █ █ █ █ █ █ █ █ █ █ │              │ █   █   █   █   █   █ │
   └───────────────────────┘              └───────────────────────┘
   Slow Diffusion / Sustained Release     Fast Diffusion / Burst Release

This exact geometric control is equally transformative for customizing drug delivery profiles. By altering the internal infill density and surface-area-to-volume ratio of a printed tablet, manufacturers can dictate exactly how fast a drug dissolves in the body. As reviewed by Devanshi Jadaun et al. in their overview, laser-based powder fusion allows for the fabrication of porous or dense drug delivery systems with high structural complexity, shifting the pharmaceutical paradigm from mass production to personalized dosages.

Validating this capability, Ming Chen et al. utilized FDM in their work to manufacture acetaminophen suppositories with customized internal geometries. By precisely engineering the internal polymer architecture, the authors achieved a highly controlled, sustained-release profile that significantly lowered peak blood drug concentrations, successfully reducing the risk of liver toxicity while maintaining therapeutic efficacy.

History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_selective_laser_melting_c13aad54,
  title = {selective laser melting},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/selective-laser-melting/rdr_c13aad542fea46d29119e4d820a9a0e6},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 1, frozen text):

@misc{lacuna_selective_laser_melting_c13aad54_v1,
  title = {selective laser melting},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/selective-laser-melting/rdr_c13aad542fea46d29119e4d820a9a0e6/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake