In physics and robotics, reductionism is a virtue. When modeling a walking robot or an autonomous agent navigating an environment, representing the system as a simplified point mass or a single inverted pendulum makes the mathematics clean and the control loops fast.
However, when we apply these exact same abstractions to the human body, we run into a fundamental wall. The human central nervous system (CNS) does not operate a simplified, low-dimensional system; it coordinates an incredibly complex, over-actuated, multi-jointed 3D apparatus. As Wolpert et al. demonstrated in their foundational work on internal forward models, Forward dynamic models in human motor control: Psychophysical evidence, state estimation models that rely on simplified low-dimensional dynamics fail to account for the non-linear muscle properties and multi-jointed realities inherent in real biological movement.
When we oversimplify biomechanical models to save on computational costs, we do not just lose fine details—we introduce systematic errors that distort our understanding of energy, balance, and motor control.
The Point-Mass and Pendulum Fallacy
Consider the task of modeling a human running or skiing. A common shortcut is to treat the entire athlete as a single point mass concentrated at their center of gravity. This assumption implies that all mechanical energy is spent moving that single point through space.
But humans are made of heavy, articulating segments. In Propulsive Power in Cross-Country Skiing: Application and Limitations of a Novel Wearable Sensor-Based Method During Roller Skiing, Øyvind Gløersen demonstrates that point-mass models systematically underestimate total mechanical power. They completely omit internal work—the significant energy expended to accelerate and decelerate limbs relative to the body's center of mass. Similarly, in explosive movements like jumping, Ezati et al. show in Optimal Vertical Jump of a Human that treating the head, arms, and trunk as a single rigid body fails to capture the countermovement effect, missing how independent arm swings generate crucial momentum that alters the jump height.
Simplified Model: [ Point Mass ] ---> Omit Internal Limb Work & Momentum
Realistic Model: [ Head/Trunk ] <---> [ Independent Arm/Leg Segments ] (Captures Internal Work)
A parallel issue arises in postural control. Treating full-body balance as a single inverted pendulum or a single point of pressure, as noted by Stevenson et al. in Bayesian Integration and Non-Linear Feedback Control in a Full-Body Motor Task, ignores the multi-segment coordination across the ankles, knees, and hips. In reality, maintaining upright posture requires managing an over-actuated system of hundreds of muscle-tendon units. As Shanbhag et al. explain in A sensorimotor enhanced neuromusculoskeletal model for simulating postural control of upright standing and Wei et al. argue in Bipedal Balance Control with Whole-body Musculoskeletal Standing and Falling Simulations, simple pendulum models fail to capture the intricate, multi-segment dynamics and muscular coordination required for true postural stability.
The Myth of Fixed-Center Joints
When models do account for individual segments, they often fall back on another simplification: treating biological joints as perfect mechanical hinges or ball-and-socket joints with fixed, intersecting axes.
Human anatomy, however, does not use pins and bolts. As Nagano et al. point out in A Three-Dimensional Linked Segment Model of the Whole Human Body, biological joints feature shifting centers of rotation. When a joint moves, the contact point rolls and glides, meaning the moment arms of the surrounding muscles change dynamically.
This error is highly pronounced in the spine and neck. In Validation of a Patient-Specific Musculoskeletal Model for Lumbar Load Estimation Generated by an Automated Pipeline From Whole Body CT, Lumbar Load Estimation Generated by an Automated Pipeline From Whole Body CT, Lerchl et al. demonstrate that modeling spinal joints as fixed spherical centers fails to account for migrating centers of rotation and the shear-resisting properties of facet joints, rendering models inaccurate in non-neutral postures.
When models reduce the spine or neck to just a few degrees of freedom or basic mechanical joints, they fail to capture the multi-joint interactions of the cervical spine (Song et al. in Validation of Attitude and Heading Reference System and Microsoft Kinect for Continuous Measurement of Cervical Range of Motion Compared to the Optical Motion Capture System), leading to unnatural oscillations during high-exertion tasks (Yoshihisa Shinagawa in Motion Conversion based on the Musculoskeletal System) or inaccurate digital human animations (Zhang et al. in HACK: Learning a Parametric Head and Neck Model for High-fidelity Animation).
The same issue applies to the hand. Stillfried et al. utilized MRI imaging in Human hand kinematics based on MRI imaging and Movement model of a human hand based on magnetic resonance imaging (MRI) to show that standard kinematic models assuming simple hinges with intersecting axes fail to capture the sophisticated, non-intersecting rotational axes of the thumb and fingers, as well as critical movements like palm arching.
Mechanical Joint: [ Fixed Center ] ---> Constant Moment Arm (Inaccurate)
Biological Joint: [ Migrating Center ] ---> Changing Moment Arm (Accurate)
Muscle Wrapping and Multi-Joint Coupling
If a model's underlying skeleton is oversimplified, its muscle simulations suffer a double penalty. Many models treat muscles as simple point-to-point strings pulling between two coordinates. However, Lerchl et al. show in Musculoskeletal spine modeling in large patient cohorts: how morphological individualization affects lumbar load estimation that point-to-point representations fail to account for how muscles wrap around skeletal structures, dynamically changing their lever arms as postures shift.
Furthermore, muscles do not act as isolated actuators on single joints. A massive portion of human musculature consists of biarticular or multi-joint muscles. As Sartori et al. argue in EMG-Driven Forward-Dynamic Estimation of Muscle Force and Joint Moment about Multiple Degrees of Freedom in the Human Lower Extremity, traditional models that calibrate muscle parameters for only one joint at a time create physiologically inconsistent force predictions because they ignore how biarticular muscles couple multiple degrees of freedom. This structural dependency across multiple joints is a core feature of biological movement that simple universal joint simulations cannot replicate (Mimura et al. in Bayesian body schema estimation using tactile information obtained through coordinated random movements).
When we ignore these overlapping muscle groups and treat joints as abstract torque actuators, we lose the ability to explain why humans choose specific, curved, highly efficient movement paths (Dornay et al. in Simulation of Optimal Movements Using the Minimum-Muscle-Tension-Change Model). It also cripples our ability to track hand poses accurately (Xie et al. in MS-MANO: Enabling Hand Pose Tracking with Biomechanical Constraints) or analyze fine motor pathologies like tremors, which propagate through complex biomechanical coupling across the fingers and digits (Baker et al. in Potential of Individual Upper-Limb Muscles to Contribute to Postural Tremor: Simulations From Neural Drive to Joint Rotation).
Why High-Fidelity Modeling Matters
Why go through the pain of modeling hundreds of muscles, migrating joint centers, or multi-segment feet? Because oversimplification introduces systematic errors that break down when applied to real-world tasks.
For instance, traditional computational models of balance often treat the foot as a single rigid segment, yet Huber et al. demonstrate in Rigid soles improve balance in beam walking, but improvements do not persist with bare feet that foot flexibility and internal joint interactions fundamentally alter postural control. Similarly, when designing controllers for wearable robots, simplifying a shoulder to a 1-DoF actuator leads to performance inaccuracies and unwanted oscillations because it ignores the arm's true multi-degree-of-freedom dynamics (Nasr et al. in Model-Based Mid-Level Regulation for Assist-As-Needed Hierarchical Control of Wearable Robots: A Computational Study of Human-Robot Adaptation).
Moving toward high-fidelity, anatomically grounded models is not just about adding detail for detail's sake; it is about capturing the fundamental physical constraints that dictate how the brain actually controls the body.
Key Foundational Work
Simulation of Optimal Movements Using the Minimum-Muscle-Tension-Change Model (1991) — contributed 1 concept elements to this direction.
Forward dynamic models in human motor control: Psychophysical evidence (1994) — contributed 1 concept elements to this direction.