Y2S3-Doped Li2S Active Cathode Materials for All-Solid-State Li–S Batteries

Kazuhiro Hikima, Ryo Fujii, Hirotada Gamo, Hirofumi Tsukasaki, Shigeo Mori, Toshiki Watanabe, Kentaro Yamamoto, Yoshiharu Uchimoto, Hiroyuki Muto, Atsunori MatsudaThe Journal of Physical Chemistry C 2023 · DOI

Abstract

All-solid-state Li–S batteries with sulfur-based cathodes have attracted attention, because of their high theoretical energy density. However, it is difficult to transfer electrons and ions and activate redox reaction of Li2S because Li2S and S are insulators. In this study, the Y2S3 doping of Li2S active cathode materials was performed to enhance their properties while minimizing the dopant amount. As a result, the 99Li2S–1Y2S3 (mol %) active cathode material exhibited the highest reversible capacities of 953 mAh g–1 that exceeded those of intrinsic Li2S, although its Y2S3 content (1 mol % = 5.7 wt %) was lower than that reported in a previous work. Transmission electron microscopy observations indicated that Y atoms aggregated on the Li2S surface in the form of P-doped LiYS2 species, and their morphology did not change after the charge–discharge process. This result indicated that the P-doped LiYS2 at the Li2S surface served as a catalyst. In addition, the full cell of the 99Li2S–1Y2S3 (mol %) with Si anode shows high capacity of 605 mAh g–1. These findings of this study enable the material design of Li2S-based cathode active materials for use in high-energy-density Li–S batteries.
BibTeX
@article{hikima2023y,
  author = {Kazuhiro Hikima and Ryo Fujii and Hirotada Gamo and Hirofumi Tsukasaki and Shigeo Mori and Toshiki Watanabe and Kentaro Yamamoto and Yoshiharu Uchimoto and Hiroyuki Muto and Atsunori Matsuda},
  title = {{Y<sub>2</sub>S<sub>3</sub>-Doped Li<sub>2</sub>S Active Cathode Materials for All-Solid-State Li–S Batteries}},
  journal = {The Journal of Physical Chemistry C},
  year = {2023},
  doi = {10.1021/acs.jpcc.3c02144},
}

Loading related content...

Figure