XFEL Imaging Techniques for High Energy Density and Inertial Fusion Energy Research at HED-HiBEF

Alejandro Laso Garcia, Mikhail Mishchenko, V. Bouffetier, G. Pérez-Callejo, Karen Appel, Alexey Arefiev, Carsten Baehtz, Erik Brambrink, Mihail Cernaianu, D. Doria, Tobias Dornheim, G.r. Dyer, N. Fefeu, Eric Galtier, Thomas Gawne, Petru V. Ghenuche, Sebastian Goede, Johannes Hagemann, M. Herbert, Hauke Höppner, Lingen Huang, Oliver Humphries, Mae Jones, Dimitri Khaghani, Thomas Kluge, Jayanath Koliyadu, Dominik Kraus, Hae Ja Lee, J. Lütgert, Mikako Makita, Jean-Paul Naedler, Bob Nagler, M. Nakatsutsumi, Quynh Nguyen, Alexander Pelka, Thomas R. Preston, Chong Bing Qu, Sripati V. Rahul, Lisa Randolph, Ronald Redmer, Martin Rehwald, Rinderknecht, Hans G., Angel Rodríguez-Fernández, J. J. Santos, Ulrich Schramm, Michal Šmíd, C. Strohm, J. Strucka, Minxue Tang, Patrik Vagovič, M. Vescovi, Long Yang, Karl Zeil, Ulf Zastrau, Thomas E. Cowan, Toma ToncianarXiv 2026 · DOI · arXiv

TL;DR

Researchers have developed a cutting-edge X-ray imaging platform at the European XFEL, combining a powerful X-ray Free Electron Laser (XFEL) with high-intensity lasers. This system achieves sub-500 nm spatial and 50 fs temporal resolution, enabling unprecedented insights into extreme states of matter relevant to fusion energy research.

What Problem Does This Paper Address?

Probing matter under extreme conditions – like those found in fusion experiments or astrophysical phenomena – is incredibly challenging. These states exist for fleeting moments (femtoseconds to nanoseconds) and at incredibly small scales (nanometers to micrometers). Traditional X-ray imaging techniques often lack the necessary spatial and temporal resolution to capture these dynamics. This paper addresses this by presenting a novel imaging platform that pushes the boundaries of resolution, allowing scientists to observe phenomena previously hidden from view.

Methods

The core of this work is the HED-HiBEF imaging platform at the European XFEL. This platform integrates:

  • X-ray Free Electron Laser (XFEL) beam: Provides a highly coherent, bright, and ultra-short X-ray pulse (less than 50 fs).
  • High-intensity short-pulse laser (ReLaX): Used to create extreme states of matter, such as hot spots and blast waves.
  • High-energy nanosecond-pulse laser (DiPOLE-100X): Also used to generate shock waves in materials.

The imaging itself relies on:

  • Magnified X-ray imaging: Utilizes beryllium compound refractive lenses (CRLs) to focus the X-rays and a high-magnification microscope with a scintillator screen to detect the image. This setup achieves an equivalent pixel size on target down to 18.3 ± 0.1 nm.
  • Talbot interferometry: A more advanced technique that leverages the Talbot effect of gratings to enhance sensitivity and accuracy, particularly for optically thin samples. This method is shown to be more robust in certain scenarios, like imaging blast waves.
  • Phase retrieval algorithms: Sophisticated computational methods are employed to reconstruct the phase information from the X-ray images, providing detailed insights into the material's properties.

Datasets

Not discussed in the paper. The paper focuses on experimental results obtained using the developed imaging platform, rather than on training or evaluating machine learning models on specific datasets.

Key Insights and Ideas

  • Bridging the Resolution Gap: The combination of XFELs and advanced imaging techniques is crucial for unlocking new scientific frontiers in high-energy density physics. The achieved resolution allows for the observation of phenomena at scales previously inaccessible.
  • Talbot Interferometry's Advantage: For certain dynamic processes like blast waves, Talbot interferometry offers a more robust and less artifact-prone imaging solution compared to traditional phase contrast imaging (PCI).
  • Charge-State Specific Imaging: By tuning the XFEL energy to specific atomic transitions, researchers can probe the ionization state of materials, offering a powerful diagnostic for understanding plasma dynamics.
  • Fusion Research Potential: The platform's capabilities, especially when combined with future kJ-class lasers, hold significant promise for addressing key challenges in inertial fusion energy (IFE) research, such as understanding instabilities and material behavior under extreme conditions.

Key Results

  • Spatial Resolution: Better than 500 nm.
  • Temporal Resolution: On the order of 50 fs.
  • Demonstrated Phenomena:
    • Blast waves and converging cylindrical shocks in aluminum.
  • Resonant absorption measurements of specific charged states in copper.
  • Planar shocks in polystyrene.
  • Compression of aluminum wires up to a factor of 4.7.
  • Comparison of Imaging Techniques: The paper quantitatively and qualitatively compares magnified X-ray imaging and Talbot interferometry, highlighting the strengths of each for different experimental scenarios.

Limitations and Future Work

  • Limitations of PCI: The paper notes that traditional phase contrast imaging can struggle with artifacts and mixtures of signals when imaging complex phenomena like blast waves.
  • Future Work with kJ-class Lasers: The authors emphasize the significant potential of coupling this imaging platform with a kJ-class laser. This would enable the exploration of even higher energy density regimes, reaching pressures up to 10-20 Mbar and providing unprecedented spatial and temporal resolution for studying states relevant to fusion.
  • Complementary Techniques: The paper suggests that combining XFEL imaging with other techniques like small-angle X-ray scattering and X-ray Thomson scattering can provide a more comprehensive understanding of plasma dynamics and material properties.
  • Resonant Imaging Nuances: While resonant imaging shows promise, the paper acknowledges challenges in deconvolving absorption and refraction effects, particularly when the ionization state is not spatially homogeneous.

Summary updated

Abstract

The imaging platform developed at the High Energy Density - Helmholtz International Beamline for Extreme Fields (HED-HiBEF) instrument at the European XFEL and its applications to high energy density and fusion related research are presented. The platform combines the XFEL beam with the high-intensity short-pulse laser ReLaX and the high-energy nanosecond-pulse laser DiPOLE-100X. The spatial resolution is better than 500 nm and the temporal resolution of the order of 50 fs. We show examples of blast waves and converging cylindrical shocks in aluminium, resonant absorption measurements of specific charged states in copper with ReLaX and planar shocks in polystyrene material generated by DiPOLE-100X. We also discuss the possibilities introduced by combining this imaging platform with a kJ-class laser.
BibTeX
@misc{garcia2026xfel,
  author = {Alejandro Laso Garcia and Mikhail Mishchenko and V. Bouffetier and G. Pérez-Callejo and Karen Appel and Alexey Arefiev and Carsten Baehtz and Erik Brambrink and Mihail Cernaianu and D. Doria and Tobias Dornheim and G.R. Dyer and N. Fefeu and Eric Galtier and Thomas Gawne and Petru V. Ghenuche and Sebastian Goede and Johannes Hagemann and M. Herbert and Hauke Höppner and Lingen Huang and Oliver Humphries and Mae Jones and Dimitri Khaghani and Thomas Kluge and Jayanath Koliyadu and Dominik Kraus and Hae Ja Lee and J. Lütgert and Mikako Makita and Jean-Paul Naedler and Bob Nagler and M. Nakatsutsumi and Quynh Nguyen and Alexander Pelka and Thomas R. Preston and Chong Bing Qu and Sripati V. Rahul and Lisa Randolph and Ronald Redmer and Martin Rehwald and Rinderknecht, Hans G. and Angel Rodríguez-Fernández and J. J. Santos and Ulrich Schramm and Michal Šmíd and C. Strohm and J. Strucka and Minxue Tang and Patrik Vagovič and M. Vescovi and Long Yang and Karl Zeil and Ulf Zastrau and Thomas E. Cowan and Toma Toncian},
  title = {{XFEL Imaging Techniques for High Energy Density and Inertial Fusion Energy Research at HED-HiBEF}},
  year = {2026},
  eprint = {2601.14028},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2601.14028},
}
Figure