Abstract
Cutting is a process of extensive stresses and plastic deformations. The high compressive and frictional contact stresses on the tool face result in a substantial cutting force R. Cutting forces are the factors for the evaluation of the cutting power in machining and influence the deformation of the workpiece, accuracy, chip formation and machinery system stability. This paper built an experiment system to investigate the influence of cutting parameters including feed f, depth of cut t, feed rate v to a tangential cutting force Pz on structural steel materials C45. The final results confirmed tolerance between theory and experiments 5% - 9%.
Introduction: The Significance of Cutting Forces
In the world of manufacturing, "cutting force" is a critical metric. It dictates how much power a machine consumes, how quickly a tool wears out, and the ultimate precision of the finished part. While theoretical formulas exist to predict these forces, real-world machining is complex—vibrations, heat, and material inconsistencies make theoretical predictions difficult to rely on without empirical validation.
The total cutting force $R$ can be decomposed into three components: the tangential force ($P_z$), the radial force ($P_y$), and the axial force ($P_x$). Among these, $P_z$ is the most significant, typically accounting for 70-80% of the total force and directly determining the power required for the cutting process.
Experimental Methodology
The researchers developed a specialized testing rig centered around a BMT 1440VE lathe to bridge the gap between theory and practice.
System Architecture
The system architecture integrates hardware sensors with a computer-based processing unit for real-time monitoring:
- Hardware Sensors: A load cell (YZC-1B) was mounted to measure the tangential cutting force ($P_z$), and an encoder was used to track the spindle's rotational speed.
- Data Acquisition (DAQ): Signals from these sensors were processed through a signal conditioning circuit and fed into a National Instruments PCI 6225 DAQ card, capable of high-speed sampling. For this study, data was sampled at 500 samples/second.
- Software Interface: The heart of the system is a custom-built LabVIEW application. This graphical programming environment allows for real-time visualization of force fluctuations, data logging, and immediate analysis.
Experimental Setup
The study generated primary experimental data by machining C45 structural steel (Hardness: 197 HB, Tensile Strength: 598 MPa). Data was collected across varying parameters:
- Depth of cut ($t$): 0.2 – 1.1 mm
- Feed rate ($f$): 0.066 – 0.23 mm/rev
- Cutting speed ($v$): 26 – 47 m/min
Key Insights and Results
The experimental results closely followed theoretical curves, validating the system's accuracy with an error margin of 5-9%.
- Linearity vs. Speed: The authors observed that while cutting force generally increases linearly with the depth of cut and feed rate, the relationship with cutting speed is more complex. Initially, force increases with speed, but once the energy required to break metallic bonds is reached, the force stabilizes even as speed continues to rise.
- The "Vibration Gap": A key insight was the source of experimental error. The 5-9% discrepancy wasn't just random noise; it was attributed to the physical rigidity of the load cell mounting and the inherent vibrations of the lathe, highlighting that sensor placement and mounting stability are as critical as sensor accuracy.
Conclusion and Future Work
The developed system successfully provides real-time machining insights, confirming that tangential force is the primary driver of power consumption and tool stress. Future research aims to:
- Improve System Rigidity: Develop a more robust, dampened mounting system to further reduce experimental error.
- Multi-Axis Measurement: Expand the system to measure the axial ($P_x$) and radial ($P_y$) force components simultaneously to capture the full resultant force ($R$).
- Expanded Variables: Include the effects of coolants, different tool materials, and the impact of these parameters on surface roughness ($R_z$).
Summary updated