Wide field of view catadioptrical Head Mounted Display

Hajime Nagahara, Yasushi Yagi, Masahiko YachidaThe Proceedings of JSME Annual Conference on Robotics and Mechatronics (Robomec) 2002 · DOI

Abstract

In applications such as Artificial Reality (VR), Mixed Reality (MR), and robot teleoperation, Head-Mounted Displays (HMDs) are widely utilized. However, most existing systems suffer from a narrow field of view (FOV) of approximately 60 degrees, which significantly limits the user's sense of immersion. This research proposes a wide-FOV HMD that achieves a horizontal field of view of approximately 180 degrees by integrating curved mirrors into a catadioptric optical system.

Introduction

The sense of "presence"—the psychological state of feeling as though one is physically located within a digital or remote environment—is a critical metric for the success of Virtual Reality (VR) and teleoperation systems. A primary technical hurdle in achieving high presence is the limited Field of View (FOV) provided by conventional Head-Mounted Displays (HMDs). Most commercial and research-grade HMDs offer a horizontal FOV of roughly 60 degrees, creating a "scuba mask" or "tunnel vision" effect. This limitation strips away peripheral vision, which is essential for spatial orientation and situational awareness.

This paper presents a novel HMD design developed at Osaka University that utilizes a catadioptric system to expand the horizontal FOV to 180 degrees, effectively matching the natural horizontal range of human vision.

The Catadioptric Optical Design

The core innovation of this research lies in moving beyond purely refractive optics. While standard HMDs rely on a series of lenses to magnify a display, achieving a 180-degree FOV through lenses alone results in significant weight, bulk, and chromatic aberration.

To overcome these challenges, the researchers employed a catadioptric system, which combines lenses with specifically shaped curved mirrors. By carefully calculating the geometry and curvature of these mirrors, the system can reflect a wide-angle image into the user's eyes. This approach allows for a much wider FOV in a more manageable form factor compared to traditional refractive designs.

System Integration and Teleoperation

This HMD is designed as part of a comprehensive teleoperation pipeline. It is intended to work in tandem with an omnidirectional image sensor (such as the "HyperOmniVision" system discussed in related work 2A1-C11). The process involves:

  1. Capture: An omnidirectional camera captures a 360-degree view of the remote environment.
  2. Processing: A 180-degree segment of this environment is "unwrapped" and formatted for the HMD.
  3. Display: The catadioptric HMD presents this wide-angle view to the operator, providing the peripheral cues necessary for complex navigation and manipulation tasks.

Key Insights

  • Qualitative Shift in Experience: Expanding the FOV from 60° to 180° represents a qualitative leap. It transitions the user experience from observing a screen to being fully immersed within a spatial environment.
  • Efficiency of Reflective Optics: The use of mirrors is demonstrated to be a more efficient method for achieving extreme wide angles in wearable hardware, avoiding the pitfalls of heavy, complex lens assemblies.
  • Enhanced Situational Awareness: For robot operators, the inclusion of peripheral vision solves many of the "navigation task" difficulties associated with narrow-FOV headsets, where users often lose track of their surroundings.

Results and Future Considerations

The primary achievement of this work is the successful realization of a 180-degree horizontal FOV. Qualitative assessments confirm a significant increase in the sense of presence and immersion compared to standard headsets.

However, the transition to such a wide FOV introduces new engineering challenges that remain areas for future development:

  • Geometric Distortion: The use of curved mirrors necessitates sophisticated software-based pre-distortion of the image to ensure the user perceives a correct, undistorted view.
  • Pixel Density: Spreading the available display resolution across 180 degrees naturally reduces the pixels-per-degree (PPD). Future iterations will need to balance FOV with visual clarity.
  • Hardware Ergonomics: While more efficient than lenses, the mirror assembly introduces unique weight distribution and form factor considerations that must be refined for long-term wearable use.

Conclusion

By breaking the 60-degree FOV barrier, this catadioptric HMD provides a viable path toward truly immersive telepresence and VR. The integration of curved mirrors offers a scalable solution for capturing the full breadth of human peripheral vision, significantly enhancing the utility of HMDs in robotics and beyond.

Summary updated

BibTeX
@inproceedings{nagahara2002wide,
  author = {Hajime Nagahara and Yasushi Yagi and Masahiko Yachida},
  title = {{Wide field of view catadioptrical Head Mounted Display}},
  booktitle = {The Proceedings of JSME Annual Conference on Robotics and Mechatronics (Robomec)},
  year = {2002},
  doi = {10.1299/jsmermd.2002.66\_4},
}
Figure