Abstract
The newly launched Fengyun-3D (FY-3D) satellite carries a Wide-field Auroral Imager (WAI) developed by the Changchun Institute of Optics, Fine Mechanics and Physics. The WAI is designed to provide high-resolution, broadband ultraviolet images of the aurora and ionosphere by targeting the N₂ Lyman–Birge–Hopfield (LBH) emission bands. Utilizing a dual-camera system with a combined 130° field of view (FOV), the instrument achieves a spatial resolution of ~10 km at nadir. Preliminary in-orbit data from August 2018 demonstrates strong agreement with established DMSP SSUSI observations, confirming the WAI's capability to monitor fine-scale auroral dynamics and oval boundaries during geomagnetic events.
Introduction: Breaking the Resolution-Coverage Trade-off
Monitoring the "auroral oval"—the region where magnetospheric particles collide with the upper atmosphere—is essential for space weather forecasting and understanding magnetosphere-ionosphere coupling. Historically, researchers have faced a significant trade-off in auroral imaging. High-altitude satellites can capture the entire oval but at low spatial resolution (~100 km). Conversely, low-Earth orbit (LEO) satellites provide high resolution (~50 km) but typically have narrow fields of view that only capture small segments of the aurora.
The Wide-field Auroral Imager (WAI) onboard the FY-3D satellite aims to bridge this gap. Operating from a LEO altitude of approximately 830 km, the WAI combines a massive 130° FOV with a high spatial resolution of ~10 km, allowing for detailed global-scale monitoring of auroral structures.
Instrumentation and Methodology
The WAI's performance is rooted in its specialized optical and mechanical architecture:
- Dual-Camera Optical System: To achieve its wide 130° fan-shaped FOV, the WAI employs two identical cameras tilted relative to each other. Each camera uses an unobstructed four-mirror anastigmatic optical system to maximize light throughput.
- Spectral Selection: The instrument targets the 140–180 nm range (N₂ LBH bands) using Barium Fluoride (BaF₂) filters and solar-blind photon-counting imaging detectors (Microchannel Plates).
- Scanning Mechanism: Mounted on a precision stepper motor, the assembly sweeps ±60° along the flight track. This "scanning mode" allows the WAI to map a 130° x 130° area in approximately two minutes.
- Data Processing Pipeline: A custom algorithm handles photon signal decoding, geometric distortion correction (critical for wide-angle optics), photometric normalization between the two cameras, and line-of-sight projection.
In-Orbit Validation and Comparative Analysis
To verify the instrument's performance, the team analyzed data captured on August 25, 2018, during a geomagnetic storm. The WAI successfully recorded the equatorward expansion and intensification of the southern auroral oval.
As shown in the figure above, the WAI data (panel b) was compared against the Special Sensor Ultraviolet Spectrographic Imager (SSUSI) onboard the DMSP F17 and F18 satellites. Because these satellites pass over the poles at roughly 20-minute intervals, the combined dataset provides a temporal "movie" of the aurora's evolution. The WAI images show excellent morphological agreement with the SSUSI benchmarks, proving that the instrument and its processing algorithms are operating normally.
Key Results and Future Outlook
The WAI has demonstrated a sensitivity of >0.01 counts s⁻¹ Rayleigh⁻¹ pixel⁻¹, which is sufficient for mapping fine structures within the auroral oval that were previously blurred in lower-resolution global images.
One current limitation is dayglow interference, visible in the upper-left corner of the WAI images (Figure b). The research team is currently developing a background removal algorithm to mitigate this noise. Looking forward, the launch of a second WAI on the FY-3H satellite will enable simultaneous monitoring of both the Northern and Southern hemispheres, providing unprecedented insights into hemispheric symmetry and global energy input during space weather events.
Summary updated