Wide-dynamic-range high-conversion-efficiency rectifier circuit for 2.48 GHz RF energy harvesting

Lintao Hou, Jinchan Wang, Yi Luo, Liwen Zhang, Bo LiuEnergy 2025 · DOI

Abstract

A pint-sized cross-coupled differential-driven rectifier (CCDDR) circuit with wide power dynamic range (PDR) and high power conversion efficiency (PCE) for 2.48 GHz LS-band RF energy harvesting is proposed. By integrating two novel functional modules—dynamic body-biasing assist (DBBA) and diode feedback biasing compensation (DFBC)—into the core rectifier, reverse leakage current and threshold voltage variations are effectively contained. Implemented in 180 nm/1.8V RF-CMOS technology, the proposed rectifier achieves a peak PCE of 77.8% at -12.5 dBm. With a wide PDR of 26 dB and a Figure of Merit (FoM) of 54.52 dB, this design provides strong support for source-free, near-zero-energy-consumption IoT communication systems.

Introduction

The rapid expansion of the Internet of Things (IoT) has led to a massive demand for powering billions of microsensors in diverse and often inaccessible environments. Traditional battery-based solutions are limited by maintenance requirements and environmental impact. Radio Frequency (RF) energy harvesting offers a sustainable alternative by converting ambient electromagnetic energy into DC power. However, the low power density of ambient RF signals necessitates rectifiers with high sensitivity and efficiency.

Block diagram of a typical RF energy harvesting system.

Current rectifier designs often struggle with reverse leakage current and high threshold voltages, which degrade efficiency at low input power. Furthermore, maintaining high efficiency over a wide power dynamic range (PDR) remains a significant challenge for practical IoT applications.

Methods

The researchers developed a Cross-Coupled Differential-Driven Rectifier (CCDDR) architecture. The design focuses on mitigating standard efficiency bottlenecks through two key innovations:

  1. Diode Feedback Biasing Compensation (DFBC): This module utilizes high-threshold PMOS transistors configured as equivalent diodes to create a positive feedback loop. This stabilizes the gate voltage of the core transistors, ensuring rapid turn-on while providing high resistance against reverse leakage current when the transistors are off.
  2. Dynamic Body-Biasing Assist (DBBA): This module dynamically adjusts the substrate (body) potential of the core transistors to lower the effective threshold voltage during the conduction phase, preventing performance degradation due to substrate-bias variations.
Circuit architecture of (a) the proposed core CCDDR and (b) the multi-stage cascaded rectifier.

The circuit was implemented using 180 nm/1.8V RF-CMOS technology. The architecture is also scalable; the authors demonstrated that a two-stage cascaded version can nearly double the output voltage to 1.41 V while maintaining high efficiency.

Results and Discussion

The proposed rectifier demonstrates superior performance compared to existing state-of-the-art designs. Key experimental results include:

  • Peak Efficiency: Achieved 77.8% PCE at an input power of -12.5 dBm.
  • Wide Dynamic Range: A PDR of 26 dB (defined as the range where PCE > 20%), significantly wider than the typical 15–20 dB range of competing designs.
  • Sensitivity: The circuit yields a stable 1 V output at an input power of -12 dBm.
  • Figure of Merit (FoM): Reached 54.52 dB, highlighting the overall excellence of the design across multiple metrics.

The physical layout is extremely compact, measuring only 76 μm × 70 μm, which is ideal for integration into small-scale IoT tags and sensors.

Conclusion

This work presents a high-performance CCDDR rectifier that addresses the critical needs of low-power RF energy harvesting. By combining gate and body biasing techniques, the design achieves high efficiency and a wide dynamic range. While post-layout parasitic effects present some challenges at higher power levels, the overall performance makes it a robust solution for future battery-free IoT applications. Future research will focus on testing with real-world modulated signals and full system integration.

Summary updated

Abstract

Abstract A pint-sized cross-coupled differential-driven rectifier (CCDDR) circuit with wide power dynamic range (PDR), and high power conversion efficiency (PCE) for 2.48 GHz LS-band RF energy harvesting is proposed. By building two novel functional modules of dynamic body-biasing assist (DBBA) and diode feedback biasing compensation (DFBC) into core rectifier, reverse leakage current while variation on gate potential and threshold voltage of core rectifier transistors can be effectively contained. Using 180 nm/1.8V RF-CMOS technology, the circuit design and layout are implemented. Followed by simulation-based performance comparison, the experimental results demonstrate that the proposed rectifier achieves a higher PCE of 77.8% at a lower input power of <m:math xmlns:m="http://www.w3.org/1998/Math/MathML"> <m:mo>−</m:mo> <m:mn>12.5</m:mn> <m:mspace width="0.33em"/> <m:mi mathvariant="normal">dBm</m:mi> </m:math> -12.5\hspace{0.33em}{\rm{dBm}} in 2.48 GHz frequency band. Additionally, benefiting from wider input PDR of 26 dB compared with other design cases, a single-stage topology rectifier can sufficiently yield a stable output supply voltage of high to 642.46 mV with the sensitivity at 1 V of <m:math xmlns:m="http://www.w3.org/1998/Math/MathML"> <m:mo>−</m:mo> <m:mn>12</m:mn> <m:mspace width="0.33em"/> <m:mi mathvariant="normal">dBm</m:mi> </m:math> -12\hspace{0.33em}{\rm{dBm}} , while the FoM value can be reached up to 54.52 dB, which can provide strong support for realizing source-free near-zero-energy-consumption IoT communication systems.
BibTeX
@inproceedings{hou2025wide,
  author = {Lintao Hou and Jinchan Wang and Yi Luo and Liwen Zhang and Bo Liu},
  title = {{Wide-dynamic-range high-conversion-efficiency rectifier circuit for 2.48 GHz RF energy harvesting}},
  booktitle = {Energy},
  year = {2025},
  doi = {10.1515/ehs-2024-0024},
}
Figure