Wide-Band Modeling On-Chip Spiral Inductors Using Frequency-Dependent Conformal ADI-FDTD Method

Hongxing Zheng, Yue Wu, Kanglong Zhang, Lu Wang, Mengjun Wang, Erping LiIEEE Access 2019 · OpenReview

Abstract

To analyze on-chip spiral inductors efficiently, an alternating direction implicit (ADI) finite difference time-domain (FDTD) method is proposed for general dispersive media. The time-domain recursive-convolution iteration equation can be used to calculate the Debye, cold Plasma, and Lorentz media in the same formula. A locally conformal technique, named medium parameters weighting method is proposed to modeling complex structure accurately. The spiral inductor integrated on the silicon substrate has been analyzed by using conformal ADI-FDTD method. And the simulation results are in agreement with the measured results. These data have been obtained over a wide frequency range from 0.1-20 GHz. The proposed method can easily be used as an accurate computer-aided design tool for radio-frequency integrated circuits.

Introduction

On-chip spiral inductors are indispensable components in modern radio-frequency integrated circuits (RFICs). However, accurately modeling these components presents significant challenges, particularly as operating frequencies reach the millimeter-wave range. Two primary obstacles hinder efficient simulation: the dispersive nature of the silicon substrate and the geometric complexity of the spiral structure itself.

Standard Finite-Difference Time-Domain (FDTD) methods often struggle with these issues. The curved geometry of spiral inductors leads to "staircasing errors" when mapped onto a rectangular grid, which degrades simulation precision. Furthermore, traditional explicit FDTD schemes are limited by the Courant-Friedrichs-Lewy (CFL) condition, requiring extremely small time steps that result in prohibitive computational costs for complex high-frequency designs.

Schematic of an on-chip spiral inductor showing geometric parameters s and w.

Methodology

This paper proposes a frequency-dependent, conformal Alternating Direction Implicit (ADI) FDTD method to overcome these limitations. The approach integrates three key innovations:

1. ADI-FDTD for Computational Efficiency

By employing an implicit time-stepping scheme, the ADI-FDTD method achieves unconditional stability. This allows researchers to use time steps significantly larger than those permitted by the CFL condition, dramatically accelerating the simulation process without compromising stability.

2. Unified Recursive Convolution for Dispersive Media

To account for the frequency-dependent properties of the silicon substrate, a time-domain recursive convolution iteration is implemented. This unified formula allows for the simultaneous calculation of Debye, cold Plasma, and Lorentz media, providing a robust framework for modeling various dispersive materials found in semiconductor processes.

3. Locally Conformal Weighting Technique

To mitigate staircasing errors without the complexity of grid deformation, a "medium parameters weighting method" is introduced. This technique calculates effective permittivity and permeability for cells intersected by material boundaries (e.g., the metal-dielectric interface of the spiral). By weighting these parameters based on the volume ratio of materials within a single cell, the method achieves high geometric accuracy on a standard rectangular mesh.

The locally conformal technique using medium parameter weighting to handle curved boundaries in a rectangular grid.

Experimental Validation

The proposed model was validated using physical prototypes of on-chip spiral inductors fabricated with high-speed silicon bipolar technology. Experimental data, including input impedance ($R_{11}$), inductance ($L$), and quality factor ($Q$), were collected across a wide frequency range (0.1–20 GHz) using a Vector Network Analyzer (PNA-X N5244A). These measurements served as the benchmark for comparing the proposed conformal ADI-FDTD method against standard dispersive media (DM) FDTD simulations.

Results and Discussion

The proposed method demonstrated superior performance in both efficiency and accuracy:

  • Efficiency: The conformal ADI-FDTD method reduced total CPU time to approximately 20% (a 5x speedup) compared to traditional DM FDTD methods.
  • Accuracy: The maximum error for input impedance was reduced from 1.0% (standard) to 0.3%. For the Quality Factor ($Q$), the error dropped significantly from 2.5% to just 0.18%.
  • Wideband Agreement: Simulation results showed excellent agreement with measured data across the entire 0.1–20 GHz spectrum, accurately capturing critical parameters such as peak quality factor and self-resonance frequency.

Conclusion

The frequency-dependent conformal ADI-FDTD method offers a powerful solution for the wide-band modeling of on-chip spiral inductors. By breaking the CFL stability limit and implementing a simple yet effective conformal weighting technique, the method provides a high-accuracy, high-efficiency tool for RFIC design. Future work will focus on extending this framework to more complex structures and further verifying its application in diverse dispersive environments.

Summary updated

Abstract

To analyze on-chip spiral inductors efficiently, an alternating direction implicit (ADI) finite difference time-domain (FDTD) method is proposed for general dispersive media. The time-domain recursive-convolution iteration equation can be used to calculate the Debye, cold Plasma, and Lorentz media in the same formula. A locally conformal technique, named medium parameters weighting method is proposed to modeling complex structure accurately. The spiral inductor integrated on the silicon substrate has been analyzed by using conformal ADI-FDTD method. And the simulation results are in agreement with the measured results. These data have been obtained over a wide frequency range from 0.1-20 GHz. The proposed method can easily be used as an accurate computer-aided design tool for radio-frequency integrated circuits.
BibTeX
@inproceedings{zheng2019wide,
  author = {Hongxing Zheng and Yue Wu and Kanglong Zhang and Lu Wang and Mengjun Wang and Erping Li},
  title = {{Wide-Band Modeling On-Chip Spiral Inductors Using Frequency-Dependent Conformal ADI-FDTD Method}},
  booktitle = {IEEE Access},
  year = {2019},
  url = {https://openreview.net/forum?id=ZeQFy-Mp9J},
}
Figure