Wedging crystals to fabricate crystalline framework nanosheets via mechanochemistry

Yun Fan, Yu Shen, Jia Zhang, Xinglong Zhang, Zeqi Zhang, Hongfeng Li, Yong Peng, Jiena Weng, Ruijie Xie, Wenlei Zhang, Yu Han, Yawen Xiao, Weina Zhang, Bing Zheng, Hao‐Li Zhang, Sheng Li, Wei Huang, Fengwei HuoNature Communications 2024 · DOI

Abstract

Mechanochemistry studies the effect of mechanical force on chemical bonds, bringing opportunities for synthesizing alloys, ceramics, organics, polymers, and biomaterials. A vital issue of applying macro-scale mechanical force to manipulate crystal structures is finding ways to precisely adjust the force directions to break micro-scale target chemical bonds. Inspired by a common technique of driving a wedge into the wood to make wood chopping much easier, a wedging strategy of splitting three-dimensional structured crystalline frameworks and then converting them to nanosheets was proposed, where specific molecules were wedged into crystalline frameworks to drive the directional transmission of mechanical force to break chemical bonds. As a result, various crystalline framework nanosheets including metal-organic framework nanosheets, covalent organic framework nanosheets, and coordination polymer nanosheets were fabricated. This wedging crystal strategy exhibits advantages of operability, flexibility and designability, and furthermore, it is expected to expand mechanochemistry applications in material preparation.

Introduction

The fabrication of two-dimensional (2D) nanosheets has traditionally relied on "top-down" exfoliation of layered precursors, such as graphite or transition metal dichalcogenides, where weak van der Waals forces allow for easy separation. However, many functional materials, including Metal-Organic Frameworks (MOFs) and Covalent Organic Frameworks (COFs), typically crystallize into robust 3D networks with isotropic bonding. Exfoliating these non-layered structures into ultrathin nanosheets remains a significant challenge, as standard mechanical treatments often result in isotropic fragmentation rather than controlled cleavage.

The Wedging Strategy

To address this, a "wedging crystal strategy" was developed, inspired by the woodworking principle of using a wedge to direct force along a specific grain. This method utilizes specific "wedge molecules" that coordinate with the framework to guide mechanical force.

Schematic illustration of the wedging strategy, showing the transformation from 3D crystalline frameworks to 2D nanosheets through mechanical force and molecular wedging.

The process involves four key stages:

  1. Mechanical Grinding: Initial force creates defects and cracks in the 3D crystal.
  2. Molecular Insertion: Wedge molecules, chosen for their chemical affinity to the framework (e.g., carboxylic acid groups for MOFs), insert themselves into these defects.
  3. Directional Transmission: Continued grinding causes these molecules to act as microscopic wedges, amplifying strain and directing force to break specific chemical bonds.
  4. Exfoliation: Subsequent sonication in a polar solvent facilitates the final separation and stabilization of the nanosheets.

Characterization and Results

The universality of this approach was demonstrated across more than 20 different frameworks, including various MOFs (UiO-66, HKUST-1), COFs (COF-300), and coordination polymers.

Comprehensive characterization of UiO-66-NH2 nanosheets, including TEM (a, b), AFM (c) showing ~4 nm thickness, XRD (d), high-resolution lattice imaging (e, f), and XAS analysis (g, h).

As shown in Figure 2, the resulting nanosheets typically exhibit lateral dimensions of 1–20 μm and an average thickness of approximately 4 nm. X-ray Absorption Spectroscopy (XAS) and X-ray Diffraction (XRD) confirmed that the local coordination environment and crystallinity of the frameworks were preserved during the process.

Performance and Applications

The transition from 3D to 2D morphology significantly enhances material performance due to increased surface area and accessible active sites. For instance, UiO-66-NH2 nanosheets achieved a 23.18% conversion rate in citronellal cyclization, nearly triple that of the bulk material (7.8%). Furthermore, membranes fabricated from these nanosheets showed exceptional dye rejection rates (96.6% to 99.85%), outperforming those made from bulk precursors.

Conclusion

The wedging crystal strategy provides a versatile and designable platform for the preparation of 2D nanosheets from non-layered 3D precursors. By leveraging the chemical coordination of wedge molecules to dictate the physical breakdown of crystals, this method expands the scope of mechanochemistry in materials science. Future research will focus on industrial scaling and the development of "smart" functionalized nanosheets for advanced electronic and catalytic applications.

Summary updated

Abstract

Mechanochemistry studies the effect of mechanical force on chemical bonds, bringing opportunities for synthesizing alloys, ceramics, organics, polymers, and biomaterials. A vital issue of applying macro-scale mechanical force to manipulate crystal structures is finding ways to precisely adjust the force directions to break micro-scale target chemical bonds. Inspired by a common technique of driving a wedge into the wood to make wood chopping much easier, a wedging strategy of splitting three-dimensional structured crystalline frameworks and then converting them to nanosheets was proposed, where specific molecules were wedged into crystalline frameworks to drive the directional transmission of mechanical force to break chemical bonds. As a result, various crystalline framework nanosheets including metal-organic framework nanosheets, covalent organic framework nanosheets, and coordination polymer nanosheets were fabricated. This wedging crystal strategy exhibits advantages of operability, flexibility and designability, and furthermore, it is expected to expand mechanochemistry applications in material preparation.
BibTeX
@inproceedings{fan2024wedging,
  author = {Yun Fan and Yu Shen and Jia Zhang and Xinglong Zhang and Zeqi Zhang and Hongfeng Li and Yong Peng and Jiena Weng and Ruijie Xie and Wenlei Zhang and Yu Han and Yawen Xiao and Weina Zhang and Bing Zheng and Hao‐Li Zhang and Sheng Li and Wei Huang and Fengwei Huo and Weina Zhang},
  title = {{Wedging crystals to fabricate crystalline framework nanosheets via mechanochemistry}},
  booktitle = {Nature Communications},
  year = {2024},
  doi = {10.1038/s41467-024-51177-0},
}

Loading related content...

Figure