VTT: Reading Vehicle Size and Powertrain Type from Motion Trajectory Across Unseen Car Models

Yuhang Wang, Yuechen Guo, Jingxin Yang, Chuheng Wei, Suyang Chen, Abdulaziz Alhuraish, Yiyi Wang, Mingyang Ban, Jingran Sun, Hao ZhouarXiv 2026 · arXiv

TL;DR

VTT introduces a large-scale dataset and benchmark for identifying vehicle size and powertrain type (EV vs. ICE) using only motion trajectories and internal sensor data. The study demonstrates that deep learning models can successfully generalize these physical attributes to car models they have never seen before, achieving up to 93% F1-score for powertrain detection.

What Problem Does This Paper Address?

Traffic simulations and urban planning rely heavily on understanding fleet composition—knowing how many large trucks versus small cars are on the road, or the ratio of electric vehicles (EVs) to internal combustion engine (ICE) vehicles. However, this information is often missing from anonymized vehicle probes or GPS trajectories.

While previous work has used external cameras or drones to classify vehicles, the authors of VTT ask a more intimate question: Does the way a car moves reveal what it is? Specifically, can we infer a vehicle's physical footprint and engine type just by looking at its "driving signature" (speed, steering, braking) across different manufacturers and models? The core challenge is cross-model generalization: a model shouldn't just memorize that a "Tesla Model 3" is a small EV; it needs to learn the underlying physics of how any small EV behaves so it can identify a brand-new model it has never encountered.

Methods

The researchers evaluated several approaches to bridge the gap between raw sensor data and vehicle attributes:

  • Sequence Architectures: They compared four deep learning models: a 1D ResNet, a bidirectional GRU, a Transformer, and the newer Mamba (a state-space model). These models process 60-second windows of 20-channel sensor data (10 Hz).
  • LLM-Assisted Feature Engineering: In a novel twist, they used Large Language Models (LLMs) to propose feature-extraction programs based on physical principles. These "hand-crafted" features were then fed into gradient-boosting models.
  • Event-Based Learning: Instead of treating a drive as one long sequence, they used Multiple-Instance Learning (MIL) to focus on specific "events" like hard braking or sustained turns, which are more likely to reveal physical limits.
  • Training Adaptations: To improve generalization, they used auxiliary tasks (like predicting the car's curb mass) and data augmentation (like flipping lateral signals) to prevent the models from over-relying on specific "shortcuts" or manufacturer-specific sensor biases.
VTT overview showing the pipeline from dataset to motion signals to unseen-model testing.

Datasets

The paper introduces the VTT (Vehicle Trajectory and Type) dataset:

  • Scale: 9,062 drives totaling ~3,950 hours of data.
  • Diversity: 1,431 unique vehicles across 174 different car models.
  • Signals: 20 channels of motion and Controller Area Network (CAN) signals, including speed, acceleration, steering angle, and pedal states.
  • Labels: Three footprint-based size classes (Small, Mid, Large) and powertrain labels (BEV, ICE, Hybrid, Plug-in Hybrid).

The authors also validated their models on several independent public logs, including commaCarSegments, VED, and OpenACC, to ensure the findings weren't limited to their specific data collection ecosystem.

Fig. 2. VTT coverage. (a) Median footprints of 202 car-model–powertrain groups (167 models); dashed lines mark the size thresholds. Other includes hybrid, mixed and unresolved powertrains. Vehicle icons illustrate size classes. (b) Regional shares of driving hours; only coarse regions are retained.

Key Insights and Ideas

  • Deceleration is the "Tell" for EVs: The most reliable indicator of a powertrain is how the car slows down. Because EVs use regenerative braking, they exhibit a distinct deceleration profile when the driver lifts off the accelerator compared to the "coasting" behavior of ICE vehicles.
  • Steering Reveals Size: The relationship between steering wheel angle and the resulting vehicle curvature (the Ackermann gain) provides a strong physical cue for a vehicle's wheelbase and overall size.
  • The "Shortcut" Trap: The authors found that models perform significantly better on "unseen drivers" of known car models than on entirely "unseen car models." This suggests that models easily "memorize" the specific sensor noise or control logic of a particular car model rather than learning general physics.
  • LLMs as Physicists: Features proposed by LLMs based on physical intuition (e.g., "calculate the ratio of lateral acceleration to steering rate") were highly effective, rivaling end-to-end deep learning in some scenarios.
Physical cues illustrating how braking behavior differs between EVs and ICEs, and how steering response relates to vehicle size.

Key Results

  • Powertrain Recognition: The best models achieved a 93.0% drive-level macro-F1 score for distinguishing between BEVs and ICE vehicles on car models never seen during training.
  • Size Classification: Classifying vehicles into three size categories proved harder, reaching a 67.1% macro-F1 score.
  • External Validation: On a public dataset with over 4,000 drivers, the model correctly identified the powertrain for 86 out of 88 car models.
  • Observation Length: While size recognition benefits from longer observations, powertrain recognition "levels off" relatively quickly (after about 8–16 windows), as a few good braking events are often enough to make a call.

Limitations and Future Work

  • Boundary Sensitivity: Size classification errors were heavily concentrated near the arbitrary boundaries between "Small," "Mid," and "Large." Future work might move toward continuous footprint estimation (regression) rather than discrete classes.
  • Geographic Bias: The dataset is heavily skewed toward North America (83.8%). Driving behaviors and fleet compositions in Europe or Asia might yield different results.
  • Automation Influence: The study noted that Driving Automation Systems (DAS) alter motion signatures. As self-driving features become more common, models will need to explicitly account for whether a human or an algorithm is "at the wheel."

Summary updated

Abstract

Vehicle size and powertrain information can enrich trajectory data for traffic analysis and simulation. We present VTT, a dataset and benchmark for identifying these attributes from motion and controller area network (CAN) signals across unseen car models. The dataset contains 9,062 drives, about 3,950 h, from 1,431 vehicles and 174 car models. It provides three footprint-based size classes, powertrain labels, and evaluation on unseen car models and unseen drivers. Using 60-s windows, we compare four sequence architectures, statistical features and physical features proposed by large language models. Training with auxiliary physical targets, data augmentation and task-specific weighting raises drive-level macro-F1 to 92.6-93.0% for battery-electric versus combustion vehicles and from 62.9% to 67.1% for size classification. On public logs from 4,061 additional drivers, the full-input model identifies powertrain correctly for 86 of 88 car models; size accuracy is 63.2%, close to the internal vehicle-level result of 63.5%. Physical-feature analysis links powertrain recognition to deceleration behaviour and size recognition to steering response. Errors near size-class boundaries and limited gains from longer observations highlight the importance of label resolution and training-fleet coverage for cross-model generalisation.
BibTeX
@misc{wang2026vtt,
  author = {Yuhang Wang and Yuechen Guo and Jingxin Yang and Chuheng Wei and Suyang Chen and Abdulaziz Alhuraish and Yiyi Wang and Mingyang Ban and Jingran Sun and Hao Zhou},
  title = {{VTT: Reading Vehicle Size and Powertrain Type from Motion Trajectory Across Unseen Car Models}},
  year = {2026},
  eprint = {2611.22109},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2611.22109},
}
Figure