Voltage Control in Distributed Generation under Measurement Falsification Attacks

Mingxiao Ma, André Teixeira, Jan van den Berg, Peter PálenskýIFAC-PapersOnLine 2017 · DOI

TL;DR

This paper investigates the impact of measurement falsification cyberattacks on voltage control in distributed generation systems. It develops analytical methods to assess how these attacks affect system stability and voltage magnitudes, providing a framework for identifying vulnerable points in the grid.

What Problem Does This Paper Address?

The increasing integration of distributed generation (DG) units, like solar panels and wind turbines, into low-voltage distribution grids presents challenges for voltage stability. To address these, inverters are being equipped with intelligent control systems, such as distributed voltage droop controls, to actively manage voltage levels. However, these communication-dependent control systems are vulnerable to cyberattacks. While research has focused on securing transmission grids, the security of distribution-level controls, particularly against measurement falsification attacks that corrupt the data received by these controllers, remains underexplored. This paper aims to fill this gap by analyzing the consequences of such attacks on the stability and voltage regulation of these systems.

Methods

The authors employ control-theoretic methods to analyze the impact of measurement falsification attacks. They utilize the concepts of positivity and row-diagonally dominant systems, which are important properties for analyzing the behavior of linear time-invariant (LTI) systems.

  1. System Modeling: The power distribution system is modeled as a set of interconnected DG units with inverter-based DERs, controllers, and loads. The voltage dynamics of these units are represented by differential equations.
  2. Attack Scenario: The paper focuses on measurement falsification attacks where an attacker manipulates the voltage measurement at a specific bus i by multiplying it with a falsification ratio δ.
  3. Linearization: The nonlinear voltage dynamics are linearized around an equilibrium point to facilitate analysis.
  4. Stability Analysis: The stability of the linearized system under attack is assessed using the properties of positive systems. Theorems are developed to establish conditions for asymptotic stability based on the falsification ratio δ and system parameters.
  5. Voltage Magnitude Deviation Analysis: The paper quantifies the impact of attacks on voltage magnitudes by analyzing the deviation of system states. A worst-case impact characterization is derived, identifying how much voltage can deviate at other buses due to an attack at a specific bus.
  6. Identification of Vulnerable Buses: The analysis is extended to identify which buses are most affected by an attack on a particular bus, leveraging the derived worst-case impact metrics.
  7. Simulation: The analytical results are validated through simulations using a 4-bus islanded distribution network in MATLAB/Simulink.

Datasets

Not discussed in the paper. The study uses a simulated 4-bus power distribution network with defined parameters.

Key Insights and Ideas

  • Measurement falsification is a significant threat: Attacks that corrupt voltage measurements can destabilize the grid and cause voltage deviations, even with intelligent control systems in place.
  • Decreasing voltage measurements are more impactful: The study reveals that an attacker decreasing the voltage measurement (δ < 1) can lead to a more severe impact on voltage deviations compared to increasing it (δ > 1), assuming the same magnitude of deviation from the nominal value.
  • Neighboring buses are most vulnerable in line networks: In a line topology, buses closest to the attacked bus are most affected by measurement falsification attacks. This suggests that network topology plays a crucial role in attack propagation.
  • Positivity and diagonal dominance are key analytical tools: These system properties provide a powerful framework for understanding and predicting the stability and behavior of power systems under cyberattacks.

Key Results

  • Analytical conditions are derived for the asymptotic stability of the linearized system under measurement falsification attacks, considering different values of the falsification ratio δ.
  • The paper provides a method to quantify the worst-case voltage magnitude deviation at any bus j caused by an attack at bus i.
  • Simulations on a 4-bus network confirm that decreasing voltage measurements (e.g., δ = 0.9) lead to larger voltage deviations than increasing them (e.g., δ = 1.1).
  • The simulation results visually demonstrate that voltage deviations are more pronounced at buses closer to the attacked bus in a line network.

Limitations and Future Work

  • Simplified attack model: The paper focuses on a specific type of multiplicative measurement falsification attack. More complex attack scenarios, such as additive attacks or coordinated attacks on multiple buses, are not considered.
  • Linearized system analysis: The analysis is based on a linearized model of the power system. While useful for understanding local stability, it may not fully capture the behavior of the system under large disturbances or nonlinear dynamics.
  • Constant phase-angle assumption: The assumption of constant phase-angle differences between neighboring nodes simplifies the analysis but might not hold in all real-world scenarios.
  • Future Work: The authors suggest that developing methodologies to assess the impact of more detailed and complex system models and more sophisticated attack scenarios would be valuable future research directions. This includes exploring more realistic network topologies and attack strategies.

Summary updated

Abstract

&lt;p&gt;Low-voltage distribution grids experience a rising penetration of inverter-based, distributed generation. In order to not only contribute to but also solve voltage problems, these inverters are increasingly asked to participate in intelligent grid controls. Communicating inverters implement distributed voltage droop controls. The impact of cyber-attacks to the stability of such distributed grid controls is poorly researched and therefore addressed in this article. We characterize the potential impact of several attack scenarios by employing the positivity and diagonal dominance properties. In particular, we discuss measurement falsification scenarios where the attacker corrupts voltage measurement data received by the voltage droop controllers. Analytical, control-theoretic methods for assessing the impact on system stability and voltage magnitude are presented and validated via simulation.&lt;/p&gt;
BibTeX
@inproceedings{ma2017voltage,
  author = {Mingxiao Ma and André Teixeira and Jan van den Berg and Peter Pálenský},
  title = {{Voltage Control in Distributed Generation under Measurement Falsification Attacks}},
  booktitle = {IFAC-PapersOnLine},
  year = {2017},
  doi = {10.1016/j.ifacol.2017.08.1562},
}
Figure