Abstract
Accurate localization of ischemia is crucial in the diagnosis of myocardial disease. The zHARP pulse sequence quantifies myocardial function by computing a three-dimensional strain tensor at each voxel, from which principal strain values and orientations can be derived. In a normal heart during systole, the strain tensor is anisotropic, and its fractional anisotropy (FA)—a value between 0 and 1 representing the degree of tensor anisotropy—differs markedly from zero. This study hypothesizes that infarcted tissue, which does not elongate as much as healthy muscle, will exhibit a smaller FA. By comparing FA maps to traditional delayed enhancement (DE) techniques, this research explores a contrast-free method for identifying infarcted tissue.
Introduction
Myocardial infarction (MI) results in permanent damage to the heart muscle, altering its mechanical properties. Currently, the gold standard for identifying these damaged areas is Delayed Enhancement (DE) MRI, which requires gadolinium-based contrast agents. However, these agents pose risks to patients with renal impairment and increase the complexity of the imaging procedure. This paper investigates a "mechanical fingerprint" approach: using the physics of heart movement to distinguish between healthy and scarred tissue without external contrast.
Methodology
The researchers employed the zHARP MRI pulse sequence to quantify 3D myocardial strain in a porcine model. Following LAD coronary artery ligation to induce infarction, 3D strain tensors were computed for each voxel.
From these tensors, Fractional Anisotropy (FA) was calculated. FA describes the "directionality" of the strain; healthy muscle contracting and stretching in specific directions yields high FA, whereas stiff, passive infarcted tissue yields low FA. To validate the findings, regions of interest (ROIs) were defined for both normal and infarcted tissue and compared against ground-truth gadolinium-enhanced DE images.
Results
The study demonstrated a clear numerical and visual separation between healthy and infarcted regions. The mean FA for healthy tissue was 0.3420 ± 0.0465, while infarcted regions showed a significantly lower mean FA of 0.1568 ± 0.0401.
Statistical analysis revealed a strong negative correlation (r = -0.86) between DE image intensity (where high intensity indicates an infarct) and FA values. As shown in the temporal analysis, the anisotropy gap between healthy and infarcted tissue is most pronounced during the systolic phase of the cardiac cycle.
Discussion and Conclusion
The core insight of this work is that mechanical stiffness and loss of directional stretching in an infarct serve as reliable surrogates for biological viability. By collapsing complex 3D strain data into a single scalar FA index, clinicians can more easily interpret heart damage maps.
While promising, the study is limited by its small sample size (a single pig model) and the use of high-SNR data. Future research must validate these FA thresholds in larger cohorts and human clinical settings where noise and multi-vessel disease may complicate the mechanical signatures. Nonetheless, FA mapping presents a viable, contrast-free alternative for the accurate localization of myocardial infarction.
Summary updated