TL;DR
This paper introduces a novel "visible-wavelength two-photon excitation microscopy" (v2PE) technique that significantly enhances the spatial resolution and image contrast for 3D live-cell imaging. By combining multifocus scanning with visible light excitation, the researchers achieved faster imaging speeds and better visualization of cellular dynamics, paving the way for more detailed studies of living biological systems.
What Problem Does This Paper Address?
Observing the intricate 3D structures and dynamic processes within living cells is crucial for understanding biological functions. Traditional microscopy techniques often struggle to provide both high spatial resolution and sufficient speed for capturing these dynamic events without causing phototoxicity or photobleaching. Two-photon excitation (2PE) microscopy offers advantages in depth penetration and reduced out-of-focus fluorescence, but achieving high temporal resolution for volumetric imaging has remained a challenge. This paper aims to overcome these limitations by developing a multifocus scanning system that utilizes visible wavelengths for 2PE, thereby improving both spatial resolution and imaging speed for live-cell imaging.
Methods
The core innovation lies in the integration of several key technologies:
- Visible-Wavelength Two-Photon Excitation (v2PE): Instead of the traditional infrared lasers used in 2PE, this work employs visible wavelengths (490-750 nm) generated by an optical parametric oscillator (OPO). This allows for excitation of a wider range of fluorescent probes and potentially higher signal generation.
- Multifocus Scanning: The system utilizes a microlens array and a pinhole array disk coupled with a confocal scanning unit. This creates multiple excitation foci simultaneously, allowing for faster image acquisition compared to single-point scanning.
- Confocal Detection: The pinhole array in the detection path acts as a confocal aperture, further improving image contrast and axial resolution by rejecting out-of-focus light.
The experimental setup involves a pulsed visible laser beam that is split into multiple foci by a microlens array. These foci then excite fluorescent probes in the sample, and the emitted fluorescence is collected, filtered by a pinhole array, and detected by an EM-CCD camera. The system's spatial resolution was evaluated both experimentally using fluorescent beads and theoretically through simulations.
Datasets
The paper does not explicitly mention or create new benchmark datasets. Instead, it uses:
- Fluorescent beads (100 nm diameter): These are used for experimental validation of the microscope's spatial resolution.
- Living HeLa cells: These cells are used for observing cellular dynamics, specifically the movement of Golgi bodies and fibrillarins. These cells were genetically engineered to express fluorescent proteins (mTFP1 and EGFP) for multicolor imaging.
Key Insights and Ideas
- Visible light for 2PE enhances resolution: The use of visible wavelengths for 2PE, combined with multifocus scanning, demonstrably improves axial resolution compared to traditional 1PE multifocus microscopy. This is a key finding, as it suggests a pathway to achieve super-resolution without relying on complex post-processing or specialized illumination schemes.
- Multifocus scanning is crucial for speed: Creating multiple excitation spots simultaneously is essential for achieving the high frame rates needed for observing dynamic cellular processes. The paper shows that this multifocus approach, when combined with v2PE, can capture volumetric data in just 2 seconds.
- Confocal detection remains vital: Even with 2PE, the confocal pinhole array plays a significant role in rejecting out-of-focus light, leading to improved image contrast and further enhancing axial resolution.
- Minimal phototoxicity for short-term imaging: The study indicates that for observation periods up to 8 minutes, the v2PE microscopy causes minimal visible cell damage, making it suitable for studying relatively short-term cellular events.
Key Results
- Improved Axial Resolution: The axial full width at half maximum (FWHM) achieved for a fluorescent bead was 297 nm, which is significantly better than the axial resolution typically obtained with 1PE multifocus microscopy.
- High Imaging Speed: The system can acquire volumetric (3D) images of living cells at a speed of 2 seconds per volume.
- Dynamic Observation of Cellular Structures: The researchers successfully observed the 3D movements of Golgi bodies in living HeLa cells with high contrast and temporal resolution.
- Multicolor Imaging Capability: The technique was extended to multicolor imaging, allowing simultaneous visualization of different cellular components (Golgi bodies and fibrillarins) labeled with different fluorescent proteins.
- Long-Term Imaging Potential: While some cell damage was observed after 9 minutes of continuous illumination, the axial scanning in 3D imaging offers potential for longer observation times by avoiding prolonged excitation of a single plane.
Limitations and Future Work
- Field of View: The authors acknowledge that the field of view of their technique is relatively smaller compared to techniques like lattice light-sheet microscopy.
- Laser Power Dependence: The temporal resolution is currently limited by the available laser power from the OPO. A higher output power light source could further improve imaging speed.
- Lateral Resolution: While axial resolution is improved, the lateral resolution of multifocus v2PE microscopy is similar to that of 1PE multifocus microscopy. The authors suggest that incorporating image scanning techniques could further enhance lateral resolution.
- Photobleaching: Photobleaching can be an issue with visible light excitation, and optimizing excitation intensity and exposure time is crucial for longer observations.
- Future Directions: The authors suggest that their technique is applicable to multicolor imaging of various cellular dynamics and can be further improved by incorporating image scanning techniques for enhanced lateral resolution. They also highlight the potential for visualizing cellular functions with high image contrast using this method.
Summary updated