Abstract
With the development of quantum technology, hybrid devices that combine superconductors (S) and semiconductors (Sm) have attracted great attention due to the possibility of engineering structures that benefit from the integration of the properties of both materials. However, until now, none of the experiments have reported good control of band alignment at the interface, which determines the strength of S-Sm coupling and the proximitized superconducting gap. Here, we fabricate hybrid devices in a generic way with argon milling to modify the interface while maintaining its high quality. First, after the milling the atomically connected S-Sm interfaces appear, resulting in a large induced gap, as well as the ballistic transport revealed by the multiple Andreev reflections and quantized above-gap conductance plateaus. Second, by comparing transport measurement with Schrödinger-Poisson (SP) calculations, we demonstrate that argon milling is capable of varying the band bending strength in the semiconducting wire as the electrons tend to accumulate on the etched surface for longer milling time. Finally, we perform nonlocal measurements on advanced devices to demonstrate the coexistence and tunability of crossed Andreev reflection (CAR) and elastic co-tunneling (ECT) -- key ingredients for building the prototype setup for realization of Kitaev chain and quantum entanglement probing. Such a versatile method, compatible with the standard fabrication process and accompanied by the well-controlled modification of the interface, will definitely boost the creation of more sophisticated hybrid devices for exploring physics in solid-state systems.
Introduction
The realization of topological quantum computing, particularly the search for Majorana zero modes (MZMs), relies heavily on hybrid devices combining superconductors (S) and semiconductors (Sm). The performance of these devices is fundamentally limited by the quality and electronic nature of the S-Sm interface. Historically, band alignment at this interface was considered a fixed material property, and existing fabrication techniques like in-situ growth often lacked the flexibility required for complex, top-down lithography. This research addresses the need for a reliable, versatile method to engineer band alignment and coupling strength post-growth.
Engineering the Interface via Argon Milling
The core of this work is an optimized argon milling protocol used to prepare the semiconductor surface before superconducting metal deposition. By varying the milling time from 20 seconds to 2 minutes, the researchers can precisely control the electronic properties of the interface.
This process does more than just clean the surface; it induces an electron accumulation layer. Schrödinger-Poisson (SP) calculations reveal that longer milling times lead to a more positive band offset, effectively "squeezing" electrons toward the surface. In the strong-coupling regime, this results in a "hollow" ring-shaped electron distribution, mimicking full-shell nanowires while maintaining gate-tunability.
Atomic Precision and Ballistic Transport
Structural characterization confirms that even after heavy etching, the interfaces remain atomically sharp and oxygen-free. High-resolution STEM imaging demonstrates an atomically connected interface between the Al shell and the InSb core.
Transport measurements on these devices show hallmarks of high-quality ballistic transport, including quantized conductance plateaus and multiple Andreev reflections (MAR). The induced superconducting gaps in these hybrids are nearly identical to the bulk gaps of the parent superconductors (Al and Pb), indicating near-perfect coupling. Notably, Pb-InSb devices achieved a "hard" gap with sub-gap conductance suppressed by two orders of magnitude.
Advanced Functionality and Material Versatility
The versatility of this method was demonstrated through nonlocal measurements in three-terminal devices. The system can be smoothly tuned between Crossed Andreev Reflection (CAR) and Elastic Co-Tunneling (ECT), which are the essential building blocks for an artificial Kitaev chain. Furthermore, the technique proved generic, successfully improving interfaces in both InSb and InAs nanowires using different superconductors like Al and Pb.
Conclusion
The use of controlled argon milling provides a powerful "tuning knob" for hybrid quantum devices. By enabling precise engineering of band alignment and wavefunction hybridization while maintaining atomic-scale interface quality, this method paves the way for more sophisticated solid-state systems and the eventual realization of robust topological quantum bits.
Summary updated